Abstract:Optical diffraction tomography (ODT) is an effective label-free technique for quantitatively refractive index imaging, which enables long-term monitoring of the internal three-dimensional (3D) structures and molecular composition of biological cells with minimal perturbation. However, existing optical tomographic methods generally rely on interferometric configuration for phase measurement and sophisticated mechanical systems for sample rotation or beam scanning. Thereby, the measurement is suspect to phase error coming from the coherent speckle, environmental vibrations, and mechanical error during data acquisition process. To overcome these limitations, we present a new ODT technique based on non-interferometric phase retrieval and programmable illumination emitting from a light-emitting diode (LED) array. The experimental system is built based on a traditional bright field microscope, with the light source replaced by a programmable LED array, which provides angle-variable quasi-monochromatic illumination with an angular coverage of ±37 degrees in both x and y directions (corresponding to an illumination numerical aperture of ∼0.6). Transport of intensity equation (TIE) is utilized to recover the phase at different illumination angles, and the refractive index distribution is reconstructed based on the ODT framework under first Rytov approximation. The missing-cone problem in ODT is addressed by using the iterative non-negative constraint algorithm, and the misalignment of the LED array is further numerically corrected to improve the accuracy of refractive index quantification. Experiments on polystyrene beads and thick biological specimens show that the proposed approach allows accurate refractive index reconstruction while greatly reduced the system complexity and environmental sensitivity compared to conventional interferometric ODT approaches.

Optical Fiber Refractive Index Profiling by Iterative Optical Diffraction Tomography

Efficient Reference-Less Transmission Matrix Retrieval for a Multimode Fiber Using Fast Fourier Transform

&Lt;title>optical Coherence Tomography Based Projected Index Computed Tomography</title>

Measurement of 3D Refractive Index Distribution by Optical Diffraction Tomography

Applicability of the Focusing Method to Measure the Refractive Index Profile of Polymer Optical Fibers

Optical Fiber Index Taper–Theoretical Analysis and Experiment Demonstration

Nondestructive Measurement Of An Optical Fiber Refractive-Index Profile By A Transmitted-Light Differential Interference Contact Microscope

High-Resolution Computed Tomography of Refractive Index Distribution by Transillumination Low-Coherence Interferometry

Complex Refractive Index Profile Measurement for Special Fibers Using Total Variation Method

Research Progress on Non-Interferometric Label-Free Three-Dimensional Refractive Index Microscopy

Computed Tomography Of Refractive Index By Low-Coherence Interferometry

Optical diffraction tomography microscopy with transport of intensity equation using a light-emitting diode array

A Novel Phase Retrieval And Reconstruction Method In Optical Diffraction Tomography

Measurement of Spatial Refractive Index Distributions of Fusion Spliced Optical Fibers by Digital Holographic Microtomography

Three Dimension Refractive Index Characterization for Photonic Waveguides

The Optical Fiber Refractive Index Profile Measurement Based on Phase-Correct Quantitative Phase Microscopy

Construction of Refractive-Index Profile of Single Mode Fiber from the Near-Field Technology with an Inverse Algorithm Method

Probing the dispersive properties of optical fibers with an array of femtosecond-written fiber Bragg gratings

Decoupling of Complex Refractive Index in Transport of Intensity Diffraction Tomography Microscopy

Two-dimensional Scanning Focused Refractive-Index Microscopy and Applications to Refractive-Index Profiling of Optical Fibers.