Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

Polarisation-independent blue-phase liquid crystal microlens array with different dielectric layer

Blue Phase Liquid Crystal Microcapsules: Confined 3D Structure Inducing Fascinating Properties

Liquid crystal microlens arrays with switchable positive and negative focal lengths

A Blue Phase Liquid Crystal Fresnel Lens with Large Transverse Electric Field Component

Optically anisotropic, electrically tunable microlens arrays formed via single-step photopolymerization-induced phase separation in polymer/liquid-crystal composite materials

Polarization‐independent Blue‐phase Liquid‐crystal Gratings Driven by Vertical Electric Field

Electrically controlled liquid-crystal microlens arrays based on plane nonuniform spiral microcoils

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

An Optical Circular-Polarization Modulator Based Liquid Crystal

Electrically tunable polarisation-independent blue-phase liquid crystal binary phase grating via phase-separated composite films

Dielectric Liquid Microlens Array with Tunable Focal Length Based on Microdroplet Array Created via Dip-Coating Method

40.3: Polarization‐dependent Binocular Waveguide Display with Patterned Cholesteric Liquid Crystal Optics

A Fast-Response and Helicity-Dependent Lens Enabled by Micro-Patterned Dual-Frequency Liquid Crystals

Single Cell Gap Polymer-Stabilized Blue-Phase Transflective Lcds Using Internal Nanowire Grid Polarizer

Electrically Controlled Liquid Crystal Microlens Array Based on Single-Crystal Graphene Coupling Alignment for Plenoptic Imaging

Blue-phase liquid crystal display with high dielectric material

Electrically Tunable Microlens Array Enabled by Polymer‐Stabilized Smectic Hierarchical Architectures

On‐Demand Polarization Controllable Liquid Crystal Laser

Programmable spatially-varying linearly polarized light with high degree of polarization for planar liquid crystal photonics

Switchable Liquid Crystal Lenticular Microlens Arrays Based on Photopolymerization-Induced Phase Separation for 2D/3D Autostereoscopic Displays.