Abstract:Tongling and Nanling region is abundant in copper ore resources. From the 1980s, a large number of the sites of mining and smelting have been found in this region, the earliest of which could date back to the Erlitou period. Slags, furnace walls and other smelting remains from the sites of mining and smelting provided a good deal of archaeological materials for the study of the smelting technology of copper ore in ancient China. Slag samples collected from the smelting sites in Tongling and Nanling region, Anhui Province were analyzed by means of X-ray diffractometer (XRD), X-ray fluorescence spectrometer (XRF) and scanning electron microscope with energy-dispersive X-ray spectrometer (SEM-EDS) to understand the smelting process of copper ore. The results of XRD showed that the main phase compositions in the slag samples included fayalite, augite and hedenbergite, accompanied with quartz, cristobalite and magnetite, et al., which corresponded with the phase characteristics of copper smelting slag. From the contents of SiO2, CaO and Fe2O3, all slag samples were divided into three groups; Type I, Type II and Type III. The Type I was Iron-Silicon-Calcium slag, which was high in the contents of calcium, iron and silicon. The calcium contents of the Type I slag were much higher than those of the Type II and the Type slag. The Type II was iron-rich slag, and its Fe2O3 contents were higher than those of the Type I and the Type fill slags. The Type III was silicon-rich slag which was higher in SiO2 contents and lower in the calcium and iron contents. The Fe2O3 contents in all slags were higher than the common melting slags. Combined with the results of XRD, it was concluded that all slag samples are from the smelting process of copper ores. Calcium and iron levels in the Type I and Type II slags vary obviously and show the significant negative correlation, which indicated that calcium and iron in the slags was not controlled artificially and it is very possible that the calcium and iron in the slags were from the copper ores. Based on the contents of calcium and iron, it could be inferred that the early craftsmen in the Tongling and Nanling region didn't seem to understand the effects of calcium-bearing flux and iron-bearing flux and master the technology of matching ore of different kinds of copper ore. According to the results of SEM-EDS, the metal prills in the slags mainly included matte, copper and arsenic bronze, which showed that the smelting activities of copper and arsenic bronze coexisted in Tongling and Nanling area. The matte prills in the slags were mainly from different sites of mining and smelting, and the matte prills with the increasing copper content in turn were not extensively found in the same sites of mining and smelting. Therefore it was difficult to certify the existence of the matte smelting process, and it was not verified whether the smelting process of "copper sulfide ore-matte-copper" has been widely used in this area in the Pre-Qin Period. The matte prills in this work were possibly produced by the dead roasting process of copper sulfide ores or cosmelting process of the copper sulfide-oxide ore. On the basis of the arsenic bronze prills in the slag of Xiajiadun site, we could draw a conclusion perhaps that the ancient craftsman in this area mastered the cosmelting technology of arsenic copper in the Western Zhou period. The research results have an important significance for the study on the origin, the development and production mode of early smelting process in ancient China.

The Special Iron Making in Southwest China Around the 10th CE: Scientific Evidence from an Iron Smelting Site in Erhai Lake Area, Yunnan Province

Iron Production Industry in Western Chongqing During the Late Ming Dynasty: A Perspective from Smelting Related Materials

Investigation of Early Bronze Age Civilizations in Yunnan: a Scientific Analysis of Metallurgical Relics Found at the Guangfentou Ruins in Jiangchuan

Exploring new discoveries of steel fining in a Western Han Dynasty city in southwest China: A case study of steel fining remains excavated from the ancient Xindu city in Sichuan Province

Genesis of the Longfengchang Polymetallic Sulfide Deposit in the Southwest Fujian Depression, Southeast China, with a Comparative Study of the “Makeng-Type” Iron Deposit

Study on the Slags from the Sites of Mining and Smelting in Tongling and Nanling Region

Forging or casting: new evidence of iron production in the Chengdu Plain in the Han dynasty

A Study on Metallurgical Artifacts Excavated from Luojiaba Site H235 in the Eastern Sichuan Region during the Eastern Han Dynasty

Study on the Copper and Iron Alloy from the Bronze Age Unearthed from the Yangtze River Area in Anhui Province, China

Osl Chronology of Traditional Zinc Smelting Activity in Yunnan Province, Southwest China

Where Did Yunnan’s Puddling Steel Technology Come From? Preliminary Analysis of Metallurgical Relics Unearthed from the Shushi Ancient City Site in Zhaotong, Yunnan Province, China

Archaeometric study of the iron objects from the Xuechi sacrificial site and its implication for bloomery iron smelting during early Western Han period in China

Thermodynamic Calculations of Direct Reduction Smelting Technology of Copper Oxide Ores Based on Smelting Slag from the Yubeidi Site, Yunnan Province

Study on Smelting Remains of Tangjiadun Site.

Analysis of Smelting Relics from Lidegui Site of Daye City

Coal-fuelled Crucible Lead-Silver Smelting in 12Th-13Th Century China: A Technological Innovation in the Age of Deforestation

Microstructural and elemental analyses of slags excavated from the Gushishan iron‐smelting site, Sichuan province, China

Research of the Metallurgical Remains in the Xitugou Site at Dunhuang

Traditional Chinese Technology of Crucible Lead Smelting: A Comprehensive Study Based on Historical Records and Archaeological Findings

The Early Cast Iron Processing Technology in Central China: Scientific Analysis on the Iron Artefacts from Ouerping Site, Shanxi Province, Ca.400bc-200Bc

Archaeometallurgical study of iron objects from a third century BC bone workshop in Xianyang, Shaanxi Province, China