Abstract:The ability to store energy on the electric grid would greatly improve its efficiency and reliability while enabling the integration of intermittent renewable energy technologies (such as wind and solar) into baseload supply. Batteries have long been considered strong candidate solutions owing to their small spatial footprint, mechanical simplicity and flexibility in siting. However, the barrier to widespread adoption of batteries is their high cost. Here we describe a lithium-antimony-lead liquid metal battery that potentially meets the performance specifications for stationary energy storage applications. This Li||Sb-Pb battery comprises a liquid lithium negative electrode, a molten salt electrolyte, and a liquid antimony-lead alloy positive electrode, which self-segregate by density into three distinct layers owing to the immiscibility of the contiguous salt and metal phases. The all-liquid construction confers the advantages of higher current density, longer cycle life and simpler manufacturing of large-scale storage systems (because no membranes or separators are involved) relative to those of conventional batteries. At charge-discharge current densities of 275 milliamperes per square centimetre, the cells cycled at 450 degrees Celsius with 98 per cent Coulombic efficiency and 73 per cent round-trip energy efficiency. To provide evidence of their high power capability, the cells were discharged and charged at current densities as high as 1,000 milliamperes per square centimetre. Measured capacity loss after operation for 1,800 hours (more than 450 charge-discharge cycles at 100 per cent depth of discharge) projects retention of over 85 per cent of initial capacity after ten years of daily cycling. Our results demonstrate that alloying a high-melting-point, high-voltage metal (antimony) with a low-melting-point, low-cost metal (lead) advantageously decreases the operating temperature while maintaining a high cell voltage. Apart from the fact that this finding puts us on a desirable cost trajectory, this approach may well be more broadly applicable to other battery chemistries.

High-Performance Antimony–Bismuth–Tin Positive Electrode for Liquid Metal Battery

Sb-Cu alloy cathode with a novel lithiation mechanism of ternary intermetallic formation: enabling high energy density and superior rate capability of liquid metal battery

Capacity extended bismuth-antimony cathode for high-performance liquid metal battery

High-performance bismuth-gallium positive electrode for liquid metal battery

Electrochemical performance and application prospect analysis of Li||Sb-Bi-Sn liquid metal batteries

Lithium-antimony-lead liquid metal battery for grid-level energy storage

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Liquid Bi-Sb-Sn Electrodes with Synergistic Stabilization Mechanism for Long-Lifespan Sodium-Based Liquid Metal Batteries

Increasing the actual energy density of Sb-based liquid metal battery

Modeling the Mass Transfer and Phase Transition of Sn-Sb Positive Electrode in a Liquid Metal Battery

Achieving Practical High‐Energy‐Density Lithium Metal Batteries by a Dual‐Anion Regulated Electrolyte

Self-healing action of Bi in high-performance Sb–Bi–Sn positive electrodes for liquid metal batteries

In-situ Polymerized Electrolyte from a Bifunctional Additive for Li+ Bulk Phase Migration and High-Flux Interface Transport in Lithium Metal Batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

High-Energy Li Metal Battery with Lithiated Host

A Na-Li dual cation liquid metal battery with high electrode utilization and high cycling stability

Ion-Transport-Rectifying Layer Enables Li-Metal Batteries with High Energy Density

Multistage channel PVDF-HFP pregnant ZIF-8@SiO 2 quasi-solid electrolyte for lithium-metal batteries

Intrinsically Nonflammable Ionic Liquid‐Based Localized Highly Concentrated Electrolytes Enable High‐Performance Li‐Metal Batteries

Liquid-phase sintering enabling mixed ionic-electronic interphases and free-standing composite cathode architecture toward high energy solid-state battery

Lithium Transport and Intermetallic Generation in Li–Bi Liquid Metal Batteries