Abstract:Typically, conjugated polymers are composed of conjugated backbones and alkyl side chains. In this contribution, a cost-effective strategy of tailoring the length of alkyl side chain is utilized to design high-performing thieno[3,4-c]pyrrole-4,6-dione (TPD)-based large bandgap polymer donors PBDT-BiTPD(Cχ) (χ = 48, 52, 56), in which χ represents the alkyl side chain length in term of the total carbon number. A combination of light absorption, device, and morphology examinations make clear that the shorter alkyl side chains yield (i) higher crystallinity and more predominant face-on crystallite orientation in their neat and BHJ blend films, (ii) higher charge mobilities (6.7×10-4 cm2 V−1 s−1 for C48 vs. 3.2×10-4 cm2 V−1 s−1 for C56), and negligible charge recombination, consequently, (iii) significantly improved fill-factor (FF) and short current (JSC), while almost the same open circuit voltage (VOC) of ca. 0.82 V in their corresponding BHJ devices. In parallel, as alkyl side chain lengths decrease from C56 to C48, power conversion efficiencies (PCEs) increased from 7.7% for C56 to 11.1% for C52, and further to 14.1% for C48 in their BHJ solar cells made with a narrow bandgap non-fullerene acceptor Y6. This systematic study declares that shortening the side chain, if providing appropriate solubility in device solution processing solvents, is of essential significance for developing high-performing polymer donors and further improving device photovoltaic performance.

Green Solvent-Processed Efficient Non-Fullerene Organic Solar Cells Enabled by Low-Bandgap Copolymer Donors with EDOT Side Chains

Realizing Over 13% Efficiency in Green‐Solvent‐Processed Nonfullerene Organic Solar Cells Enabled by 1,3,4‐Thiadiazole‐Based Wide‐Bandgap Copolymers

Towards High-Efficiency Non-Fullerene Organic Solar Cells: Matching Small Molecule/polymer Donor/acceptor

Nonhalogen Solvent‐Processed Asymmetric Wide‐Bandgap Polymers for Nonfullerene Organic Solar Cells with over 10% Efficiency

Two-Dimensional Bdt-Based Wide Band Gap Polymer Donor for Efficient Non-Fullerene Organic Solar Cells

A Wide-Band Gap Copolymer Donor for Efficient Fullerene-Free Solar Cells.

Efficient Non-Fullerene Organic Solar Cells Based on a Wide-Bandgap Polymer Donor Containing an Alkylthiophenyl-Substituted Benzodithiophene Moiety

Achieving Efficient Ternary Organic Solar Cells Using Structurally Similar Non‐Fullerene Acceptors with Varying Flanking Side Chains

Dithienonaphthalene-Based Non-fullerene Acceptors with Different Bandgaps for Organic Solar Cells

Synthesis of Medium Bandgap Copolymers Based on Benzotriazole for Non-Fullerene Organic Solar Cells

N-alkyl chain modification in dithienobenzotriazole unit enabled efficient polymer donor for high-performance non-fullerene solar cells

Efficient wide-band-gap copolymer donors for organic solar cells with perpendicularly placed benzodithiophene units

Wide bandgap donor polymers containing carbonyl groups for efficient non-fullerene polymer solar cells

Toward efficient non-fullerene polymer solar cells: Selection of donor polymers

Enhanced Efficiency in Fullerene-Free Polymer Solar Cell by Incorporating Fine-designed Donor and Acceptor Materials.

Side-chain Modification of Non-fullerene Acceptors for Organic Solar Cells with Efficiency over 18%

Developing Halogen‐Free Polymer Donors for Efficient Nonfullerene Organic Solar Cells by Addition of Highly Electron‐Deficient Diketopyrrolopyrrole Unit

Design of simple-structure wide-bandgap conjugated polymers based on BDT for efficient non-fullerene solar cells

Shorter alkyl chain in thieno[3,4-c]pyrrole-4,6-dione (TPD)-based large bandgap polymer donors – Yield efficient non-fullerene polymer solar cells

Fused Nonacyclic Electron Acceptors with Additional Alkyl Side Chains for Efficient Polymer Solar Cells

Fluorinated And Alkylthiolated Polymeric Donors Enable Both Efficient Fullerene And Nonfullerene Polymer Solar Cells