Abstract:This article presents the process of building a hybrid analytical model (HAM) for surface-mounted permanent-magnet machines. The HAM couples a reluctance network (RN) model in the stator region with a magnetic scalar potential analytical model in the air gap and magnets regions. This hybrid model can deal with the slotting effect with straight teeth, and takes magnetic saturation into account in the stator iron material using the RN model. It is calculated under open-circuit and loaded conditions. The magnetic flux density, flux linkage, back electromotive force (EMF), and torque of the machines are also calculated. This hybrid model is compared with the subdomain method. It is also compared with the finite element method (FEM) both in terms of the size of the matrix that needs to be calculated and in terms of the torque error. We analyzed this method for two surface-mounted permanent-magnet machines, one with a symmetry factor of four and another with a symmetry factor of three. In both cases, HAM reduced the size of the matrix that needed to be solved compared to FEM. In the machine with a symmetry factor of three, when the matrix size of both FEM and HAM was around 1700 × 1700, the torque error of FEM was 2.62% compared to the high-mesh-density FEM simulation, while the torque error of HAM was only 0.17% compared to the same simulation. HAM also had significant advantages over the subdomain method, as it reduced the torque error from 16.8% to 0.08% in the case of high magnetic saturation. The HAM can, hence, play a significant role in the design and optimization of surface-mounted permanent-magnet machines, especially in cases where magnetic saturation is present.

Active Saturation Method for Rotor Magnetic Bridges in Synchronous Reluctance Machines

Performance Analysis of Asymmetric-Excited Flux Reversal Permanent Magnet Linear Machines

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Analysis and Design of Synchronous Reluctance Machines Part Ⅷ: Analysis of Rotor Flux Bridge Ribs

Torque Analytical Model of Switched Reluctance Motor Considering Magnetic Saturation

The Influence of the Uncertainty of Flux-Bridge Width and BH-curve on Synchronous Reluctance Machines Performance

Analytical Prediction of Magnetic Field Distribution in Spoke-Type Permanent-Magnet Synchronous Machines Accounting for Bridge Saturation and Magnet Shape

Analytical Model and Design of Spoke-Type Permanent-Magnet Machines Accounting for Saturation and Nonlinearity of Magnetic Bridges

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Fast Design Methodology for Synchronous Reluctance Machine Rotor with Circular Flux Barriers

A Hybrid Analytical Model for the Electromagnetic Analysis of Surface-Mounted Permanent-Magnet Machines Considering Stator Saturation

Magnetic Field Calculation of the U-Shaped Interior Permanent-Magnet Synchronous Machine Considering the Parallel Magnetization and Bridge Saturation

Permanent Magnet Synchronous Reluctance Machines with Axially Combined Rotor Structure

Comparative Study on Vibration Behaviors of Permanent Magnet Assisted Synchronous Reluctance Machines With Different Rotor Topologies

Analytical Solution of Magnetic Field in High-Speed Permanent Magnet Synchronous Machines with Novel Composite Rotor

A Hybrid PM-Assisted SynRM with Ferrite and Rare-Earth Magnets

A Simplified Method to Analyze Synchronous Reluctance Machine

Analytical Calculation of Stray Magnetic Field in Interior Permanent Magnet Synchronous Motor under Static Eccentricity Considering Nonlinear and Non-uniform Magnetic Saturation

Electromagnetic Modeling and Investigation for Bearingless Switched Reluctance Motor Considering Magnetic Saturation

Analysis and Design of Synchronous Reluctance Machines Part Ⅻ: Investigation of Permanent Magnet Assisted Synchronous Reluctance Machines