Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Modeling of Thermodynamic Properties of Diesel Fuel and In-Cylinder Gas for Diesel Engine Combustion Investigation

Improved Thermodynamic Model for Lean Natural Gas Spark Ignition in a Diesel Engine Using a Triple Wiebe Function

Three-Dimensional Computational Fluid Dynamics Modeling of the Combustion Process of a MAN L21/31 Marine Diesel Engine

Multidimensional Computational Fluid Dynamics Combustion Process Modeling of a 6V150 Diesel Engine

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

Computational Fluid Dynamic Modelling a Heavy-Duty Compression-Ignition Engine Fuelled with Diesel and Gasoline-Like Fuels

Cylinder process simulation with heat release analysis in diesel engine

SIMULATING COMBUSTION AND EXHAUST GAS EMISSIONS IN A DI DIESEL ENGINE BY USING A CFD CODE COMBINED WITH DETAILED CHEMISTRY

Development of a Diesel/Natural Gas Mechanism Model for the CFD Simulation of Dual-Fuel Engine.

An Experimental Investigation into Combustion Fitting in a Direct Injection Marine Diesel Engine

Effect of Different Combustion Models and Alternative Fuels on Two-Stroke Marine Diesel Engine Performance

Investigation on Gaseous Fuels Interchangeability with an Extended Zero-Dimensional Engine Model

Simulation Techniques for Heat Release Calculation of Diesel Engines

Using Parametrized Finite Combustion Stage Models to Characterize Combustion in Diesel Engines

Investigation of Hydrogen Addition on the Combustion, Performance, and Emission Characteristics of a Heavy-Duty Engine Fueled with Diesel/natural Gas

Numerical Investigation of Combustion and Emission With Different Diesel Surrogate Fuel by Hybrid Breakup Model

A wall heat transfer model and a skeletal reaction mechanism of iso-octane for CFD simulatiaon of gasoline engines

Investigation of real gas effects on combustion and emissions in internal combustion engines and implications for development of chemical kinetics mechanisms

Investigation on Mathematical Model and Optimiz ing of Combustion Process for DME (1)-Combustion Model

Modeling Heavy-Duty Diesel Engines Using Tabulated Kinetics In A Wide Range Of Operating Conditions

Influence of natural gas substitution rate on heat release rate of marine dual fuel engine