Abstract:This paper mainly studies the heat transfer performance of backplane micro-channel heat pipes by establishing a steady-state numerical model. Compared with the experimental data, the heat transfer characteristics under different structure parameters and operating parameters were studied, and the change of heat transfer coefficient inside the system, the air outlet temperature of the back plate and the influence of different environmental factors on the heat transfer performance of the system were analyzed. The results show that the overall error between simulation results and experimental data is less than 10%. In the range of the optimal filling rate (FR = 64.40%–73.60%), the outlet temperature at the lowest point and the highest point of the evaporation section is 22.46 °C and 19.60 °C, the temperature difference does not exceed 3 °C, and the distribution gradient in vertical height is small and the air outlet temperature is uniform. The heat transfer coefficient between the evaporator and the condenser is larger than the heat transfer coefficient under the conditions of low and high liquid charge rate. It increases gradually along the flow direction, and decreases gradually with the flow rate of the condenser. When the width of the flat tube of the evaporator increases from 20 mm to 28 mm, the internal pressure drop of the evaporator decreases by 45.83% and the heat exchange increases by 18.34%. When the number of evaporator slices increases from 16 to 24, the heat transfer increases first and then decreases, with an overall decrease of 2.86% and an increase of 87.67% in the internal pressure drop of the evaporator. The inclination angle of the corrugation changes from 30° to 60°, and the heat transfer capacity and pressure drop increase. After the inclination angle is greater than 60°, the heat transfer capacity and resistance decrease. The results are of great significance to system optimization design and engineering practical application.

Numerical Investigation on Thermal Characteristics and Flow Distribution of a Parallel Micro-Channel Separate Heat Pipe in Data Center

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

CFD Simulation on the Heat Transfer and Flow Characteristics of a Microchannel Separate Heat Pipe under Different Filling Ratios

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Numerical Study on Flow and Thermal Characteristics of a Micro-Channel Separated Heat Pipe under Various Surface Wettability

Numerical Investigation on Thermal Characteristics of Micro-channel Separate Heat Pipe

Study on Thermal Performance of MicroChannel Separate Heat Pipe for Telecommunication Stations : Experiment and Simulation

Experimental and Simulation Study of Micro-Channel Backplane Heat Pipe Air Conditioning System in Data Center

Simulation of a Micro Channel Separate Heat Pipe (MCSHP) under Low Heat Flux and Low Mass Flux

A Quasi-Three-dimensional Distributed Parameter Model of Micro-Channel Separated Heat Pipe Applied for Cooling Telecommunication Cabinets

Experimental Investigation on the Thermal Performance of Water Cooled Multi-Split Heat Pipe System (MSHPS) for Space Cooling in Modular Data Centers

Experimental Study of a Pump-Driven Microchannel-Separated Heat Pipe System

Finite Time Thermodynamic Analysis and Optimization of Water Cooled Multi-Spilit Heat Pipe System (MSHPS)

Experimental Study on the Thermal Characteristics of Micro Channel Separate Heat Pipe Respect to Different Filling Ratio

Modeling and Analysis of Two-Phase Distribution in Large-Scale Separate Heat Pipe

Experimental Study on the Thermal Performance of Flat Loop Heat Pipe Applied in Data Center Cooling

Study of Two-Phase Flow Distribution in Microchannel Heat Exchanger Header - A Numerical Simulation

Research on Heat Transfer Performance of Micro-Channel Backplane Heat Pipe Air Conditioning System in Data Center

Numerical Study and Parametric Analysis of Thermo-Hydraulic Behavior in a Flat Loop Heat Pipe at System Scale

Experimental Investigation of Heat Transfer and Flow Characteristics of Split Natural Cooling System for Data Center Based on Micro Heat Pipe Array

Numerical investigation on heat transfer of vertical micro-heat pipe arrays