Abstract:The process of melt electrospinning has received noteworthy attention due to its ability to fabricate micro scaled polymer fibers. Recently, a melt electrospinning process has been attracting attention for biomedical applications, in particular with scaffold fabrication for tissue engineering. In order to enhance cell attachment and proliferation on scaffolds, it is important to control fiber diameters to create an environment to which cells can attach, grow, and proliferate with ease. However, because electrospinning is a process with many parameters, it is particularly difficult to precisely control the diameter of the resulting fibers. Also, polymer powders or pellets melted in nozzles are typically used for melt electrospinning. However, a filament feeding melt electrospinning process has not been yet been implemented. In this study, we developed a melt electrospinning device which can feed PCL (Polycaprolactone, Mw: 80 000 g mol−1) filaments for advanced electrospun fiber diameter control. The PCL filaments were first fabricated by a small scale micro-compounder and then fed into the melting chamber of the electrospinning device. The system was then heated to a desired temperature, and the melt was extruded through a nozzle. The potential difference between the nozzle and counter electrode then drew down the PCL extrudate, creating fine microfibers. Temperature was controlled and monitored via a customized temperature control system. In order to control the dispensing of the PCL filaments, a customized control algorithm using NI (National Instruments) LabVIEW was used. In order to actively cool PCL filaments, a miniature computer fan was attached on the side of the melting chamber so that the filaments would not buckle. This paper reveals the investigation of significant process parameters that influence fiber diameters and their optimization. For instance, applied voltages, distances between the nozzle and a counter electrode, processing temperatures, and polymer resin flowrates were varied. We also studied and summarized the effect of duty cycle—a ratio of forward and backward motions of the filament within a cycle time—for advanced fiber diameter control. Moreover, the relationship between a flow rate and a duty cycle and their influences on a fiber diameter were studied.

Facile Fabrication of Porous Polymer Fibers Via Cryogenic Electrospinning System

Surface Modified Electrospun Porous Magnetic Hollow Fibers Using Secondary Downstream Collection Solvent Contouring

Humidity-Controlled Preparation of Flexible Porous Carbon Fibers from Block Copolymers

Polymer Fibers with Hierarchically Porous Structure: Combination of High Temperature Electrospinning and Thermally Induced Phase Separation

Nanoporous Structured Submicrometer Carbon Fibers Prepared Via Solution Electrospinning of Polymer Blends.

Electrospinning in Compressed Carbon Dioxide: Hollow or Open-Cell Fiber Formation with a Single Nozzle Configuration

Composition Design of Block Copolymers for Porous Carbon Fibers

Advancing Nanofiber Research: Assessing Nonsolvent Contributions to Structure Using Coaxial Electrospinning

Fabricating polycitrate-based biodegradable elastomer nanofibrous mats via electrospinning

Fabricating and controlling PCL electrospun microfibers using filament feeding melt electrospinning technique

Liquid Crystal Fibers Produced by Using Electrospinning Technique

STUDIES ON ONE-STEP ELECTROSPINNING FOR PREPARING CROSSLINKED GELATIN FIBERS

Fabrication of micro-hollow fiber by electrospinning process in near-critical carbon dioxide

Preparation of porous hollow polyacrylonitrile ultrafine fibers by coaxial electrospinning

Fabrication of PS/PVDF-HFP Multi-Level Structured Micro/Nano Fiber Membranes by One-Step Electrospinning

Robust and Multifunctional Porous Polyetheretherketone Fiber Fabricated via a Microextrusion CO 2 Foaming

Flash Freezing Route to Mesoporous Polymer Nanofibre Networks

Preparation of Polyacrylonitrile and Polystyrene Blend Fibers Through Electrospinning

Preparation of flexible phenolic resin-based porous carbon fabrics by electrospinning

Magnetic-Field-Assisted Emulsion Electrospinning System: Designing, Assembly, and Testing for the Production of PCL/Gelatin Core–Shell Nanofibers

PREPARATION OF POROUS POLYACRYLONITRILE ULTRATHIN FIBERS BY ELECTROSPINNING WITH NONSOLVENT INDUCED PHASE SEPARATION