Abstract:The stabilized platform is a cylindrical body that can freely rotate inside the downhole drilling tool. Successful control of the stabilized platform toolface angular position could be achieved by adjusting the electromagnetic torque of the turbine motor. The torque magnitude can be controlled by modulating the on/off state of the load resistance using a pulse‐width modulation circuit. To handle the disturbances and uncertainties issue in the control of the stabilized platform toolface angle, a composite control approach based on a backstepping sliding mode control (BSMC) method with a nonlinear disturbance observer (NDO) is proposed. First, a nonlinear mathematical model of the stabilized platform is established, and the NDO is employed to observe and compensate for the external disturbance. Then, the BSMC control approach based on the nonlinear mathematical model is designed to improve the robustness of the stabilized platform control system. The asymptotic stability of the designed controller and NDO convergence are mathematically verified using the Lyapunov theory. Furthermore, to address the dead zone torque caused by mechanical friction on the stabilized platform, which could lead to instability in the toolface angle, a novel dead zone torque estimation algorithm is presented. Finally, in comparison with other advanced control methods, simulation results show the superiority and robustness of the proposed scheme under complex disturbances from the downhole environment. And drilling simulation experiment results are provided to validate the robustness and adaptivity of the proposed method.

Robust Station-Keeping Control of Sun-Earth/Moon Libration Point Orbits Using Electric Propulsion

The Stable Orbit of the Small Satellite Flying-Around the Space Station and the Orbit Maintenance

ESO-based Robust Predictive Control of Lunar Module with Fuel Sloshing Dynamics

Adaptive Robust Sensorless Control for PMSM Based on Improved Back EMF Observer and Extended State Observer

Robust I&I Adaptive Dsc With Disturbance Observer For Maglev System With Output Constraint

Finite-time Extended State Observer Based Prescribed Performance Fault Tolerance Control for Spacecraft Proximity Operations

Active Disturbance Rejection Station-Keeping Control of Unstable Orbits Around Collinear Libration Points

Active disturbance rejection station-keeping control of cislunar point orbits

Halo Orbit Station-Keeping for in the Presence of Solar Gravitational Perturbations

Observer-Based Robust Finite-Time Trajectory Tracking Control for a Stratospheric Satellite Subject to External Disturbance and Actuator Saturation

ADRC-Based Orbit Maintaining Control of Spacecraft Formation Flying Around Halo Orbits About the Sun-Earth Libration Points

Iterative learning observer‐based fault‐tolerant control for on‐orbit serving spacecraft with coupled orbit and attitude dynamics

On Orbit Control of Spacecrafts with Solar Sail Around the Earth-Moon Collinear Libration Point

On the Station-Keeping and Control of the World Space Observatory/Ultraviolet

Design and Stationkeeping of Lissajous Trajectories about the Earth-Moon Collinear Libration Points

Backstepping sliding mode control of stabilized platform for fully rotary steerable drilling system based on nonlinear disturbance observer

Autonomous and Robust Orbit-keeping for Small Body Missions

Robust ESO Two-Degree-of-Freedom Control Design for Permanent Magnet Synchronous Motor

Station-keeping of Small Amplitude Motions Around the Collinear Libration Point in the Real Earth–Moon System

Robust relative orbit synchronization for spacecraft cluster: A distributed learning sliding mode control approach

Adaptive Control on SE(3) for Spacecraft Pose Tracking with Harmonic Disturbance and Input Saturation