Abstract:Tip clearance flow between rotating blades and the stationary casing in high-pressure turbines is very complex and is one of the most important factors influencing turbine performance. The rotor with a winglet-cavity tip is often used as an effective method to improve the loss resulting from the tip clearance flow. In this study, an aerodynamic geometric optimisation of a winglet-cavity tip was carried out in a linear unshrouded high-pressure axial turbine cascade. For the purpose of shaping the efficient winglet geometry of the rotor tip, a novel parameterisation method has been introduced in the optimisation procedure based on the computational fluid dynamics simulation and analysis. The reliability of a commercial computational fluid dynamics code with different turbulence models was first validated by contrasting with the experimental results, and the numerical total pressure loss and flow angle using the Baseline k-omega Model (BSL κ-ω model) shows a better agreement with the test data. Geometric parameterisation of blade tips along the pressure side and suction side was adopted to optimise the tip clearance flow, and an optimal winglet-cavity tip was proven to achieve lower tip leakage mass flow rate and total pressure loss than the flat tip and cavity tip. Compared to the numerical results of flat tip and cavity tip, the optimised winglet-cavity design, with the winglet along the pressure side and suction side, had lower tip leakage mass flow rate and total pressure loss. It offered a 35.7% reduction in the change ratio [Formula: see text]. In addition, the optimised winglet along pressure side and suction side, respectively, by using the parameterisation method was studied for investigating the individual effect of the pressure-side winglet and suction-side winglet on the tip clearance flow. It was found that the suction-side extension of the optimal winglet resulted in a greater reduction of aerodynamic loss and leakage mass flow than the pressure-side extension of the optimal winglet. Moreover, with the analysis based on the tip flow pattern, the numerical results show that the pressure-side winglet reduced the contraction coefficient, and the suction-side winglet reduced the aerodynamic loss effectively by decreasing the driving pressure difference near the blade tips, the leakage flow velocity, and the interaction between the leakage flow and the main flow. Overall, a better aerodynamic performance can be obtained by adopting the pressure-side and suction-side winglet-cavity simultaneously.

Numerical study of tip leakage flow control in turbine cascades using the DBD plasma model improved by the parameter identification method

Kriging Surrogate Model Applied in the Mechanism Study of Tip Leakage Flow Control in Turbine Cascade by Multiple DBD Plasma Actuators

Optimization And Evaluation Of Multiple Dbd Plasma Actuators Applied In The Tip Leakage Control For Turbine Cascade

Treatment and Optimization of Casing and Blade Tip for Aerodynamic Control of Tip Leakage Flow in a Turbine Cascade

Experimental and Numerical Investigations for Dual−Cavity Tip Aerodynamic Performance in the Linear Turbine Cascade

Experimental and numerical investigations of tip clearance flow and loss in a variable geometry turbine cascade

Numerical Investigations on Film Cooling Effectiveness and Heat Transfer Performance of Inclined Film Hole on the Turbine Blade Squealer Tip with Plasma Actuation

Numerical Simulation of the Aerodynamic Characteristics of Blade Tip Leakage Flow in Steam Turbines

Experimental and numerical investigation of high load turbine blade tip cavity structures

Numerical study on effect of design parameters of the single-circumferential groove on tip leakage flow reduction in a transonic turbine

Numerical Investigation on the Effect of Tip Clearance on a Turbine Stage Flow-field and Aerodynamic Performance

Aerodynamic Optimisation of a Winglet-Cavity Tip in a High-Pressure Axial Turbine Cascade

Experimental Study of Flow Control on Tip Leakage Flow in Variable Geometry Linear Turbine Cascades with Different Pivot Layouts

Study on Leakage Loss Control Method of Circumferential Bending Clearance

Control of Compressor Tip Leakage Flow Using Plasma Actuation

Experimental and Numerical Investigations of Tip Injection on Tip Clearance Flow in an Axial Turbine Cascade

Numerical Simulation Investigation on Improvement of Compressor Cascade Performance by SDBD Plasma Aerodynamic Actuation

Active Flow Control for Passage Vortex Reduction in a Linear Turbine Cascade with Various Tip Clearance Sizes Using a Dielectric Barrier Discharge Plasma Actuator

Novel Wave-Shaped Tip-Shroud Contours Towards Reducing Turbine Leakage Loss

Effects of Suction Surface Near Tip Coolant Injection on the Aerodynamics of Tip Leakage Flow in a High-Pressure Turbine Cascade

Near Tip Loss Control with a Winglet Baffle Cavity Tip in a Turbine Cascade