Abstract:Herein, a circular cylinder with a slit is implemented as an effective passive flow control technique for flow control and other relevant industrial practices. Two-dimensional incompressible Navier-Stokes equations are numerically solved using the high-resolution spectral element method at a Reynolds number of 200. The slit width ratio s/d is varied from 0 to 0.3, and the slit attack angle is between 0 degrees to 90 degrees. The findings show that, for attack angle 0 degrees <= beta <= 45 degrees, a larger slit width ratio and a smaller attack angle tend to induce a lower time-mean drag coefficient and root-mean-square lift coefficient. The relative reduction ratio of the time-mean drag coefficient reaches a maximum of 28.6% at s/d = 0.30 and beta = 0 degrees. For attack angle 45 degrees < beta < 60 degrees, the slotted cylinder has only a slight effect on the force characteristics and flow patterns. For attack angle 60 degrees <= beta <= 90 degrees, the mean drag coefficient and root-mean-square lift coefficient are greater than the normal cylinder for each slit width ratio. The strength of the vortices is found to be strengthened and more stable than that of a normal cylinder.

Numerical Investigation of Flow Around a Slotted Circular Cylinder at Low Reynolds Number