Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

Modulation Transfer Spectroscopy Based on Acousto-Optic Modulator with Zero Frequency Shift

Laser Frequency Stabilization by Combining Modulation Transfer and Frequency Modulation Spectroscopy

Modulation transfer spectroscopy on Cs D<sub>2</sub> line exposed to a dual-frequency laser field

Zeeman-tunable Modulation Transfer Spectroscopy

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Experimental Investigation of Modulation Transfer Spectrum of Cesium D2 Line

Modulation-Free Laser Frequency Locking by AOM Shifted Cesium Sub-Doppler Spectra

Two Schemes Of Modulation-Free Frequency Stabilization Of Grating-External-Cavity Diode Laser Via Cesium Sub-Doppler Spectra

Modulation Transfer Spectroscopy for D1 Transition Line of Rubidium

Frequency Stabilization of a 1083 Nm Fiber Laser to 4he Transition Lines with Optical Heterodyne Saturation Spectroscopies

Optical Frequency Comb Generation from a 1.65 Μm Single-Section Quantum Well Laser.

Optically Tunable Frequency-Doubling Brillouin Optoelectronic Oscillator with Carrier Phase-Shifted Double Sideband Modulation

A Silicon Optical Single Sideband Modulator with Ultra-High Sideband Suppression Ratio

Optical-domain modulation cancellation method for background-suppression and dual-gas detection in light-induced thermo-elastic spectroscopy

An Electrically Tunable Frequency-Doubling Optoelectronic Oscillator with Operation Based on Stimulated Brillouin Scattering

A Tunable Optoelectronic Oscillator Based on a Dispersion-Induced Microwave Photonic Filter

Modulation transfer function measurement of charge-coupled devices using frequency-variable fringe patterns

Modulation-free Laser Stabilization Technique Using Integrated Cavity-Coupled Mach-Zehnder Interferometer

All-fiber Implementation of Modulation Transfer Spectroscopy for 4he Atoms

Compact 459-Nm Cs Cell Optical Frequency Standard with 2.1×10−13/τ Short-Term Stability

Compact Optical Frequency Standard with MEMS Vapor Cells