Abstract:The number of excavated tunnels is increasing day by day, and the corresponding engineering scale is also getting increasing. Safe, efficient, and economically beneficial tunnel construction methods are indispensable in the process of crossing mountains and steep ridges in the southwest region. However, behind the improvement of transportation infrastructure in Southwest China is the support provided by the rapid development of blasting industry engineering technology in China. In the process of tunnel construction using the drilling and blasting method, in addition to blasting vibration disasters the phenomenon of overbreak and underbreak caused by blasting construction is a prominent problem. This phenomenon not only affects the safety and stability of the tunnel excavation but also seriously increases the construction cost. Based on a short mountain hard rock tunnel project in southwest China, this paper studies the effect of blasting construction on the blasting vibration of adjacent structures and the influence of tunnel contour forming quality. Through the monitoring and analysis of in situ blasting vibration, the Sadowski formula is used to study the attenuation law of blasting vibration velocity in different tunnel sites, which provides a theoretical basis for tunnel blasting vibration control. This article compares the use of overbreak and underbreak value with the traditional method to determine the degree of overbreak and underbreak. It introduces the analysis of contour section fractal dimension value and uses fractal theory in the Python image processing module to accurately and quantitatively describe the problems of tunnel overbreak and underbreak. The feasibility and accuracy of this method have been verified, by combining the total station and 3D laser scanner results of overbreak and underbreak measurements of the Brenner Base Tunnel and a short hard rock tunnel in a mountainous area of southwestern China. The blasting scheme was optimized from the aspects of cut hole form, detonator interval time, and peripheral hole charge structure, and the rationality of the optimized scheme was verified according to the on-site blasting experiments. It has a profound influence on strengthening the protection of adjacent tunnel structures and improving the economic benefit of mountain highway projects.

Influence of Wavelength-to-tunnel-diameter Ratio on Dynamic Response of Underground Tunnels Subjected to Blasting Loads

Vibration of layered saturated ground with a tunnel subjected to an underground moving load

Dynamic Response and Blast-Resistance Analysis of a Tunnel Subjected to Blast Loading

Dynamic Response of Tunnel in Viscoelastic Saturated Soil Subjected to Blast Loads

Dynamic Response Analysis of Underground Double-Line Tunnel under Surface Blasting

Dynamic damage and response characteristics of the tunnel by FEM modeling and field trials

Numerical analysis of internal blast effects on underground tunnel in soils

Dynamic Response of a Tunnel Buried in a Saturated Poroelastic Soil Layer to a Moving Point Load

Optimization of Blasting Parameters Considering Both Vibration Reduction and Profile Control: A Case Study in a Mountain Hard Rock Tunnel

Analysis of Blasting Vibration Effect of Railway Tunnel and Determination of Reasonable Burial Depth

Analysis of Blast Wave Propagation Inside Tunnel

Influence of blasting load directions on tunnel stability in fractured rock mass

Physical Model Test on the Deformation Behavior of an Underground Tunnel Under Blasting Disturbance

An Analytical Solution to Investigate the Dynamic Impact of a Moving Surface Load on a Shallowly-Buried Tunnel

Analysis of Blast Wave Propgation Inside Tunnels

Numerical Analysis for Dynamic Response of In Situ Blasting Expansion of Large Cross-Section Tunnel with Small Net Distance

Propagation characteristics and prediction of blast-induced vibration on closely spaced rock tunnels

Vibration velocity and frequency characteristics of surrounding rock of adjacent tunnel under blasting excavation

Study on cyclic blasting failure characteristics and cumulative damage evolution law of tunnel rock mass under initial in-situ stress

Research and Analysis on the Influence of Small Clear Distance Drilling and Blasting Method on the Existing Tunnel Structure

Dynamic Stress Concentration and Particle Velocity Response of a Composite Lining Tunnel with Imperfect Interfaces Subjected to Blasting P Waves