Abstract:In vehicle side collisions, traumatic brain injury caused by the impact between occupant's head and the interior parts of A or B pillar is a major reason of death and disability. In order to analyze the biomechanical response and injury mechanism of occupant's brain in side collisions, a refined finite element head model representing the 50th percentile Chinese male was developed. Its improvements of biofidelity comparing to the original head model were illustrated through model simulation against the same post mortem human subjects test. Based on the refined head model, the brain biomechanical responses and injuries in the side impact with interior parts of A pillar and B pillar were analyzed according to FMVSS 201U, and the influences of different impact locations and directions were investigated. The results showed that the brain tissues on impact side sustained positive pressure and those on the opposite side experienced negative pressure. The transmission of pressure wave was easy to cause brain concussion and other diffuse brain injuries. The intracranial pressure distribution exhibited a typical pattern of contrecoup injury. The extreme stress concentration in the junction area of the cerebrum, cerebellum and brain stem could lead to focal injury such as brain contusion and laceration. Moreover, the impact injury of A pillar was more serious than that of B pillar, which was consistent with the traffic injury statistics that the head injury in oblique side collisions was more serious than that of vertical side collisions. Therefore, the interior parts of A pillar should be designed to absorb more energy than those of B pillar under the same conditions. In addition, the severity of brain injury is more sensitive to the variation of the horizontal angle than that of the vertical angle. Both the peak values of the occipital fossa pressure in effect simulations of the horizontal and vertical angles were three to four times of the peak values of the forehead pressure. When the impact horizontal angle was up to 255 degrees, or the vertical angle was up to 45 degrees, the head HIC(d) values would be up to 1320.45 and 1101.06, respectively, which indicated a AIS 3+ injury risk of the head.

UPPER EXTREMITY BIOMECHANICS MODELING OF AVERAGE CHINESE DRIVERS AND INJURY RESPONSES TO AIRBAG IMPACT

Development of Finite Element Model of Impact Injury to Upper Limb of Chinese Human Body

Development and Validation of a Human Biomechanical Model for Rib Fracture and Thorax Injuries in Blunt Impact.

Development of a human biomechanical model and its application in vehicle safety

DEVELOPMENT AND BIOFIDELITY EVALUATION OF AN OCCUPANT BIOMECHANICAL MODEL OF A CHINESE 50TH PERCENTILE MALE FOR SIDE IMPACT

Biomechanical Responses and Injury Evaluation of Human Thorax and Abdomen During Vehicle Collision

Estimation of Injury Limits At Vulnerable Impact Locations Along the Forearm via Thums AM50 Finite Element Model At Airbag Loading Rates

Investigation on Driver’s Lower Limb Injury Based on 3D Active Muscle Model During Offset Frontal Impact

Analysis of Lower Limb Injury Mechanism of an Average Chinese Pedestrian Lower Limb FE Model in Lateral Impact

Thoracic Response of the Chinese Human Body Model in 50th Percentile Male Size (CHUBM-M50) in Blunt Impacts – Investigation in Speed, Direction and Location

Optimization Design and Injury Analysis of Driver’s Restraint System in Sedan Small Offset Collision

Translational medical bioengineering research of traumatic brain injury among Chinese and American pedestrians caused by vehicle collision based on human body finite element modeling

Optimization of the Driver’s Seat Belt and Injury Biomechanical Analysis in Real-World Minivan Small Offset Impact Accident Scenarios

Research on modeling and injury of human body in head-on collision of vehicles

Injury Biomechanics Evaluation of a Driver with Disabilities during a Road Accident-A Numerical Approach

Analysis of Head Injury in Traffic Accidents Based on Human Body Biomechanics Model

Biomechanical response and injury effects on occupant's thorax–abdomen under seat belt loading

A Human Active Lower Limb Model for Chinese Pedestrian Safety Evaluation

BIOMECHANICAL ANALYSIS OF OCCUPANT’S BRAIN RESPONSE AND INJURY IN VEHICLE INTERIOR SECOND IMPACT UTILIZING A REFINED HEAD FINITE ELEMENT MODEL

Effects of active muscle forces on driver’s lower-limb injuries due to emergency brake in various frontal impacts

Development and validation for finite element model of human thorax based on automotive impact injuries