Abstract:Recycled demolition waste (RDW) and ground granulated blast furnace slag-fly ash-based geopolymer (GFG) are promising materials for treating high-plasticity clay (CH) in highway subgrades. However, the underlying synergistic stabilization mechanisms remain unclear. To elucidate the fundamental mechanisms governing post-treatment soil stabilization, a multi-scale laboratory investigation was undertaken. This investigation encompassed the evaluation of mechanical properties (compaction, California bearing ratio (CBR), and unconfined compressive strength (UCS)) to quantify the enhanced performance of the treated soil. Additionally, microstructural and mineralogical characterization was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and atomic force microscopy (AFM) to elucidate the microscopic mechanisms responsible for this improvement. The results indicated that the addition of RDW led to a reduction in the optimum moisture content (OMC) while increasing the maximum dry density (MDD) of CH. Moreover, upon incorporating RDW-GFG, the mechanical properties of the cured soil exhibited significant improvement. Specifically, the addition of 25% RDW to CH resulted in a 184% increase in CBR and effective improvement in water stability (immersion swelling percentage is reduced). Furthermore, when 25% RDW and 15% GFG were added to CH, the UCS has increased significantly by 8 times. The addition of RDW effectively enhanced the particle size distribution, compacted the soil, thus increased the shear strength. The results from XRD and SEM analyses revealed that the inclusion of GFG could generate geopolymer cementitious bonding network in the soil matrix. These materials facilitated bonding between CH particles and RDW, filling the pores and densifying the overall structure, thus increasing its strength. The synergy of RDW-GFG substantially improved the highly plastic soil through physicochemical actions, markedly elevating both its strength and water stability. Consequently, the outcomes of this experimental study offer valuable insights for road engineering applications.

Engineering and Environmental Evaluation of Silty Clay Modified by Waste Fly Ash and Oil Shale Ash As a Road Subgrade Material

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Mechanical and Durability Properties of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregate and Fly Ash, Slag and Silica Fume

Aggregation and Dehydration of Excavated Soft Clay and Use for Subgrade Engineering-Part 2: A Pilot-Scale Study

Expansive soil modified by iron tailing sand and calcium carbide slag as subgrade material

Properties Analysis of Oil Shale Waste as Partial Aggregate Replacement in Open Grade Friction Course

Preparation, characterization and application of red mud, fly ash and desulfurized gypsum based eco-friendly road base materials

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay

Experimental Study on Expansive Subgrade Clay Soils Stabilized With Sugarcane Bagasse Ash and Nonwoven Geotextile

Amelioration Effect of Fly Ash and Powdered Ground Steel Slag for Improving Expansive Subgrade Soil

Identifying the microstructure and mechanical properties of expansive soil stabilized using fly ash and waste foundry sand

Influence of Mechanical and Microscopic Properties of Red Sandstone Modified by Different Solid Waste Materials

Evaluating the strength characteristics of mixtures of municipal solid waste incineration bottom ash and reddish laterite clay for sustainable construction

Study on Performance Tests and the Application of Construction Waste as Subgrade Backfill

Study of the Design and Mechanical Properties of the Mix Proportion for Desulfurization Gypsum–Fly Ash Flowable Lightweight Soil

Mechanical Characteristics of Soda Residue Soil Incorporating Different Admixture: Reuse of Soda Residue

Calcium Carbide and Wood Ash as Environmentally Friendly Soil Stabilisers for Enhanced Subgrade Performance

Mechanical Properties Test and Enhancement Mechanism of Lime Soil Modified by High Content Soda Residue for Road Use

A systematic characterization of the mixture of red mud and bottom ash as a geomaterial: an efficient utilization in subgrade pavement

Recycling of Oily Sludge as a Roadbed Material Utilizing Phosphogypsum-Based Cementitious Materials

Soft Clay Modified with Municipal Solid Waste and Stabilized with Nano-MgO for Pavement Subgrade and Embankment Fill Applications