Abstract:The ability to model the cyclic behavior of low yield point steel accurately is essential for its application to seismic design. In this study, uniaxial tests of monotonic and strain controlled cyclic loading are conducted to investigate the mechanical properties of the low yield point steel BLY160. As observed in the test, work-hardening is an important hysteretic characteristic, which significantly influences the energy dissipation capacity of the steel. However, the cyclic softening in both stiffness and stress evolve as the plastic strain accumulates, which is manifested in the decrease of both the stress amplitude and the elastic domain of the stress–strain hysteresis loops. This change in the shape of the cyclic loops is called the “flattening effect” in this paper. To describe the cyclic hardening and softening effect by using one unified set of material parameters, a more sophisticated model based on the concept of internal variables is proposed as an extension of the combined isotropic-kinematic hardening model. The novel idea of a “transformation zone” with the introduction of an additional internal variable is proposed to synchronize the updates of isotropic and kinematic hardening such that the simultaneous change in the stress amplitude and the elastic region can be reproduced. Note that the cyclic softening develops in three stages: incubation, growth and the stabilization period. The logistic function, which presents a curve with an “S” shape, is first used to trace the evolution of the softening. Finally, the model parameters are identified by the test data, and the accuracy of the proposed model is verified by comparing the simulated performance and the experimental response under different loading histories. The results demonstrate that the extended model can elaborately describe the evolutional processes of cyclic hardening and softening by incorporating characteristics, such as the nonlinear transient behavior from elastic to plastic status, early yield under reversed loading and strain history dependence.

A Physically-Based Model of Cyclic Responses for Martensitic Steels with the Hierarchical Lath Structure under Different Loading Modes

A dislocation-based model for cyclic plastic response of lath martensitic steels

Modeling of Low Cycle Behavior of P92 Steel Based on Cyclic Plasticity Constitutive Equations

A Physically-Based Constitutive Model for a Novel Heat Resistant Martensitic Steel under Different Cyclic Loading Modes: Microstructural Strengthening Mechanisms

A Dislocation-Based Constitutive Model for the Cyclic Response of Nanolath Strengthened Steels

A Modified Microstructure-Based Creep Damage Model for Considering Prior Low Cycle Fatigue Damage Effects

A constitutive model of cyclic plasticity with Lode dependence for structural steels

Cyclic Hardening and Softening Behavior of the Low Yield Point Steel BLY160: Experimental Response and Constitutive Modeling

An Experiment-Based Cumulative Damage Mechanics Model of Steel under Cyclic Loading

A Multi-Scale Crystal Plasticity Model for Cyclic Plasticity and Low-Cycle Fatigue in A Precipitate-Strengthened Steel at Elevated Temperature

A Hierarchical Theoretical Model for Mechanical Properties of Lath Martensitic Steels

Plasticity modeling for a metastable austenitic stainless steel with strain-induced martensitic transformation under cyclic loading conditions

A Combined Elastic–plastic Framework Unifying the Various Cyclic Softening/hardening Behaviors for Heat Resistant Steels: Experiment and Modeling

Modelling Creep-Fatigue Behaviours Using a Modified Combined Kinematic and Isotropic Hardening Model Considering the Damage Accumulation

Experimental and Modeling Study of Uniaxial Cyclic Behaviors of Structural Steel under Ascending/descending Strain Amplitude-Controlled Loading

Constitutive model for cyclic behavior of mild steel under various strain amplitudes

Investigation of Low Cycle Fatigue Crack Propagation Behavior of 316H Steel at 550℃ Based on Cyclic Response and Damage Accumulation: Experiment and Modelling

Investigation of low cycle fatigue crack propagation behavior of 316H steel at 550°C based on cyclic response and damage accumulation: experiment and modelling

Experimental and Modeling Study of High-Strength Structural Steel under Cyclic Loading

Cyclic Behaviour Constitutive Modelling of a Tempered Martensitic Steel Including Ageing Effect

Unravelling the Effects of Ratcheting and Constraint on the Cyclic Behaviour of a Martensitic Steel under Elevated Temperature