Abstract:Damage to underground structures caused by liquefaction is one of the important types of hazards in the field of geotechnical engineering. Utility tunnels are the lifeline projects of cities. To ensure the sustainable and safe operation of utility tunnels over a design life of 100 years, this paper investigates the seismic response pattern of utility tunnels in the liquefied site. In this paper, shaking table tests were carried out on the utility tunnel in a layered liquefiable site. Based on the test data, the distribution law of acceleration field and pore pressure field in the model and the deformation of the soil were analyzed first. Then the soil-structure interaction, the strain and uplift of the structure were investigated. The results show that liquefaction of sand layers under strong earthquakes, resulting in seismic energy loss. The acceleration of the upper clay layer is attenuated by the seismic isolation of the liquefied soil. The utility tunnel affects the propagation of soil acceleration, which decays faster beneath the structure for the same height. The process of pore water pressure growth is a process of energy accumulation and the pore water pressure ratio curve and Arias intensity are significantly correlated. During the test, the phenomenon of sand boil appeared, and the cracks appeared on the ground surface and developed continuously. The utility tunnel in liquefied soil is lifted under the action of excess pore water pressure. There are vertical and horizontal displacement differences at the deformation joints. The strain in the utility tunnel at the stratigraphic junction is mainly influenced by the action of the bending moment, large shear deformation in the transverse section. The strain at the connection between the partition wall and the top slab is the largest and is the weak position of the structure, followed by the connection between the side walls and the top slab, and the bottom slab of the structure have a smaller strain. The results provide insights into the dynamic properties of soils and structures in liquefaction sites.

Shaking Table Test of Seismic Response of Immersed Tunnels under Effect of Water

Observed response of a shield-driven tunnel to fluctuations in river stage

Shaking Table Test and Dynamic Response Analysis of Saturated Soil–Submarine Tunnel

Dynamic Response of Shallow-Buried Small Spacing Tunnel with Asymmetrical Pressure: Shaking Table Testing and Numerical Simulation

Shaking Table Test on Seismic Response of Tunnel-Soil Surface Structure System considering Soil-Structure Interaction

Shaking table test on the seismic performance of prefabricated utility tunnel passing through hard-soft strata under longitudinal excitation

Dynamic Responses of Steep Bedding Slope-Tunnel System under Coupled Rainfall-Seismicity: Shaking Table Test

Shaking Table Tests on the Seismic Response of Symmetrically Integrated Underground Stations

Large scale shaking table model test and analysis on seismic response of utility tunnel in non-homogeneous soil

Study on seismic behaviors of a double box utility tunnel with joint connections using shaking table model tests

Shaking Table Test on the Tunnel Dynamic Response under Different Fault Dip Angles

Shaking table test on shaft-tunnel junction in liquefiable sand site

Shaking table test study of a surface frame structure–sand–tunnel system

The Large-Scale Shaking Table Model Test of the Shallow-Bias Tunnel with a Small Clear Distance

Full-Scale Experimental Study on the Effect of Ground Surcharge on the Stress and Deformation of Shield Tunnels

Shaking Table Tests for Seismic Response of Oblique Overlapped Tunnel

Seismic behaviors of utility tunnel-soil system: With and without joint connections

The Influences of the Offshore Ground Motion and Site Factors on the Seismic Response of Immersed Tunnels

Shaking Table Tests of Seismic Response of Multi-Segment Utility Tunnels in a Layered Liquefiable Site

Shaking Table Model Test of Loess Tunnel Structure under Rainfall

Multi-point shaking table test of a long tunnel subjected to non-uniform seismic loadings