Experimental investigation of a thermochemical energy storage system based on MgSO 4 -silica gel for building heating: adsorption/desorption performance testing and system optimization
Hui Yang,Chengcheng Wang,Yelong Zhang,Binjian Nie,Lige Tong,Shaowu Yin,Li Wang,Yulong Ding
DOI: https://doi.org/10.1016/j.enconman.2023.118000
IF: 10.4
2023-12-24
Energy Conversion and Management
Abstract:To address the gap between the thermochemical energy storage (TCES) performance of MgSO 4 -porous matrix composites in small-scale prototypes and their practical application, a TCES system with an output power of 50 kW was designed and constructed to investigate the feasibility of using MgSO 4 -silica gel composites in large-scale storage systems for long-term heating applications. Thirty consecutive sets of experiments were performed on both the reactor and the system. Aiming at energy storage system for space heating and hot water supply, four parameters (energy consumption, energy storage density, energy storage efficiency, and specific energy storage capacity) were investigated as the key performance evaluation indicators. The experiment results indicated the energy consumption of the heater and humidifier account for approximately 80 % of total energy consumption. The findings also demonstrated the potential to increase the ESD from 0.47 GJ/m 3 to 0.76 GJ/m 3 by exploiting the heat generated from the additional circulation water in the reactor's shell. The optimized system achieved an efficiency increase of ∼ 11 %, reaching over 60 %, and the specific energy storage capacity can reach up to 198.15 Wh/kg. In addition, the supply water temperature can stay above 50 °C for roughly 4 h, with a maximum value from 70.1 °C to 82.4 °C, and the water temperature lift was found to as high as 57.4 °C. Additionally, the adsorption heat accounted for approximately 44 % of the total energy storage.
energy & fuels,thermodynamics,mechanics