Abstract:PurposeThe purpose of this paper is to explore the possibility of combining additive manufacturing (AM) with topology optimization to generate support structures for addressing the challenging overhang problem. The overhang problem is considered as a constraint, and a novel algorithm based on continuum topology optimization is proposed.Design/methodology/approachA mathematical model is formulated, and the overhang constraint is embedded implicitly through a Heaviside function projection. The algorithm is based on the Solid Isotropic Material Penalization (SIMP) method, and the optimization problem is solved through sensitivity analysis.FindingsThe overhang problem of the support structures is fixed. The optimal topology of the support structures is developed from a mechanical perspective and remains stable as the material volume of support structures changes, which allows engineers to adjust the material volume to save cost and printing time and meanwhile ensure sufficient stiffness of the support structures. Three types of load conditions for practical application are considered. By discussing the uniform distributive load condition, a compromise result is achieved. By discussing the point load condition, the removal work of support structures after printing is alleviated. By discussing the most unfavorable load condition, the worst collapse situation of the printing model during printing process is sufficiently considered. Numerical examples show feasibility and effectiveness of the algorithm.Research limitations/implicationsThe proposed algorithm involves time-consuming finite element analysis and iterative solution, which increase the computation burden. Only the overhang constraint and the minimum compliance problem are discussed, while other constraints and objective functions may be of interest.Practical implicationsCompared with most of the existing heuristic or geometry-based support-generating algorithms, the proposed algorithm develops support structures for AM from a mechanical perspective, which is necessary for support structures particularly used in AM for mega-scale construction such as architectures and sculptures to ensure printing success and accuracy of the printed model.Social implicationsWith the rapid development of AM, complicated structures result from topology optimization are available for fabrication. The present paper demonstrates a combination of AM and topology optimization, which is the trend of fabricating manner in the future.Originality/valueThis paper remarks the first of attempts to use continuum topology optimization method to generate support structures for AM. The methodology used in this work is theoretically meaningful and conclusions drawn in this paper can be of important instruction value and practical significance.

Topology Optimization Considering Overhang Constraint in Additive Manufacturing

Self-supporting Topology Optimization for Additive Manufacturing

Topology Optimisation of Self-Supporting Structures Based on the Multi-Directional Additive Manufacturing Technique

A Novel Application Framework for Self-Supporting Topology Optimization

A post-topology optimization process for overhang elimination in additive manufacturing: design workflow and experimental investigation

Structural topology optimization subject to overhang angle constraint with overhang length relaxation in additive manufacturing

A Topology Optimization Algorithm Based on the Overhang Sensitivity Analysis for Additive Manufacturing

Level Set-Based Topology Optimization with Overhang Constraint: Towards Support-Free Additive Manufacturing

Three-dimensional High Resolution Topology Optimization Considering Additive Manufacturing Constraints

Topology Optimization of Self-Supporting Structures with Polygon Features for Additive Manufacturing

Self-supporting Structure Design with Feature-Driven Optimization Approach for Additive Manufacturing

ADDITIVE MANUFACTURING-ORIENTED STRESS MINIMIZATION TOPOLOGY OPTIMIZATION WITH CONNECTIVITY

Three-dimensional Topology Optimization Considering Overhang Constraints with B-spline Parameterization

Generating Support Structures for Additive Manufacturing with Continuum Topology Optimization Methods

A Survey of Topology Optimization Methods Considering Manufacturable Structural Feature Constraints for Additive Manufacturing Structures

Topology optimization of continuum structures under hybrid additive-subtractive manufacturing constraints

Structural Topology Optimization with Four Additive Manufacturing Constraints by Two-Phase Self-Supporting Design

Topological Optimization of Continuum Structures for Additive Manufacturing Considering Thin Feature and Support Structure Constraints

Topology optimization for additive manufacturing with length scale, overhang, and building orientation constraints

Layout Design of Thin-Walled Structures with Lattices and Stiffeners Using Multi-Material Topology Optimization

Additive Manufacturing-Driven Topological Design Considering Overhang and Connectivity Constraints Induced by Closed Cavity