Abstract:Summary form only given. Two very different approaches to theoretical description of interaction of high-pressure arc plasmas with refractory cathodes exist in the literature. One group of researchers believes that space-charge effects on refractory cathodes are small and contribute to the arc voltage no more than one or two volts. Accordingly, these researchers use simulation models which are based on the assumption of quasi-neutrality, or even stronger assumption of local thermodynamic equilibrium (LTE), in the whole arc volume. Other researchers believe that the voltage drop in the near-cathode space-charge sheath is no less than 10V and rely on models where the near-cathode sheath plays a central role.Extensive experimental data on near-cathode voltage obtained during the last decade for low-current arcs (I ≤ 10A), which are in the range 10-50V, indicate that the first abovedescribed (no-sheath) approach is not justified and the second (sheath-accounted) approach should be used for such arcs, and this is a common knowledge now. Unfortunately, reliable experimental data are difficult to obtain for high-current arcs. The status quo is as follows: the sheath-accounted approach is used in virtually all works on modelling of low-current arcs; the no-sheath approach is used in most works on highcurrent arcs. Amazingly, there has been little interaction between research in these two fields, in spite of the physics of near-cathode plasma layers in highand low-current arcs being similar, and the question as to what physical reasons could justify the use of so strongly different approaches has not even been asked. In this work, both a sheath-accounted model and an LTE model are used for modelling of electrical characteristics of a short atmospheric-pressure argon arc. It is found that the LTE model substantially overestimates the resistance of the part of the arc column adjacent to the cathode sheath. Furthermore, it is shown that if this resistance is evaluated - n the framework of the LTE model in an accurate way, than the calculated arc voltages are significantly higher than those observed in the experiment. However, conventional numerical algorithms like SIMPLE perform this evaluation in an inaccurate way and the use of these algorithms amounts to a cut-off, which is why it is possible to obtain in the modelling arc voltages comparable to the experimental values.

A 2D Model for Low-Pressure Hollow Cathode Arc Discharges in Argon

Numerical study of the power deposition in low-pressure hollow cathode arc discharges

Unified Modeling and Kinetic Analysis of the Near-Cathode Region and Hot Cathode in Atmospheric-Pressure Arc Discharges

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Two-dimensional self-consistent numerical simulation of the whole discharge region in an atmospheric argon arc

Hollow cathode modeling: I. A coupled plasma thermal two-dimensional model

Two-temperature modeling of lamellar cathode arc

Thermal and Electrical Influences from Bulk Plasma in Cathode Heating Modeling

Sheath Vs. Quasi-Neutral Plasma Voltages in High-Pressure Arc Discharges

Studies on Plasma Transport Processes in the Cathode Sheath of Atmospheric Direct-Current Arc Discharge with Particle-in-cell and Monte Carlo Collision Simulation

Effect Of A Near-Cathode Sheath On Heat Transfer In High-Pressure Arc Plasmas

Non-equilibrium Modelling of Free-Burning Argon Arc in Different Anode Sheath Regimes

A coupled plasma‐thermal model for hollow cathode power decomposition and parametric analysis

Numerical Simulation for Low Pressure DC Argon Glow Discharge

Modeling on plasma energy balance and transfer in a hollow cathode

Numerical Simulation of Kinetic Characteristics of Thermal Emission-Driven Argon Microarc Discharge at Atmospheric Pressure

Energy and Mass Transport Properties in the Near-Cathode Region of Atmospheric Thermal Plasma

Two-dimensional Modeling Concerning the Effects of the Boundary Conditions along the Cathode Sheath-arc Column Interface on the Characteristics of the Dual-jet Arc Plasmas

Investigation of the Short Argon Arc with Hot Anode, Part II: Analytical Model

Improved Cathode Spot Crater Model in Vacuum Arc

Validated two-dimensional modeling of short carbon arcs: Anode and cathode spots