Abstract:Thermophotovoltaic (TPV) device is a thermoelectric conversion method with great application prospects. In the far-field regime, the thermoelectric power is usually small due to the Planck blackbody radiation limit, but can be substantially enhanced in the near-field regime where evanescent waves will participate in the heat transfer by tunneling. In this aspect, the surface optical density of state is a key factor that will determine the transfer conversion of thermal photons. Plasmonic or phononic resonance materials have been discussed in the literature to acquire large heat flux. Besides, metamaterial is another way to pursue the design freedoms for the same purpose. In this work, we propose a [CaF2/W]n multilayer based infrared hyperbolic metamaterial (HMM) with high surface density of states as an emitter of a high-performance TPV cell made of an InSb p-n junction (energy bandgap = 0.17 eV). The effective medium theory (EMT) is utilized to describe the electromagnetic behavior of the HMM. The near-field heat flux is calculated based on electrodynamic wave theory and Green's function method, and the photocurrent of thermophotovoltaic device is derived using diffusion equation for semiconductor. For comparison, we design three different radiators, i.e. tungsten film (W), [GaF2/W]n multilayer hyperbolic metamaterial (HMM), and tungsten-grounded HMM (WHMM). Compared with the pure tungsten radiator, the artificial structure exhibits the hyperbolic dispersion characteristic in a wide frequency range, which gives rise to a higher local density of states, in particular in the hyperbolic-to-elliptic spectral transition region. As a result, the radiation power and the energy conversion efficiency are greatly enhanced, which are more easily realized by a matched emission band achieved by the structural design. We find that the thermophotovoltaic device with WHMM radiator has a similar power and conversion efficiency to that with the HMM radiator. The influence of the substrate can be ignored when the hyperbolic metamaterial is thicker than 140 nm, very beneficial to the actual fabrication of the device. By our system, with multilayer hyperbolic metamaterial (HMM) radiator, a high electric power >1 W/m2 and a conversion efficiency about 11% can be obtained at a bias temperature of 200 K and a 100 nm vacuum gap. Compared with nanowire arrays or natural hyperbolic material, the multilayer structure proposed in this paper has obvious advantages in bandwidth and manufacturing and may find important applications in near-field thermophotovoltaic device and other relevant areas.

Hybrid Solar Absorber–Emitter by Coherence‐Enhanced Absorption for Improved Solar Thermophotovoltaic Conversion

Scalable Selective Absorber with Quasiperiodic Nanostructure for Low-Grade Solar Energy Harvesting

Theoretical Study of Selective Absorber and Narrowband Emitter Based on Metamaterial Matched with InGaAsSb Cells for an STPV System

Design and Theoretical Study of a Metamaterial Absorber-Emitter Pair Matched with a Low-Bandgap PV Cell for an STPV System

Spectrum‐Selective High‐Temperature Tolerant Thermal Emitter by Dual‐Coherence Enhanced Absorption for Solar Thermophotovoltaics

Efficient, Scalable, And High-Temperature Selective Solar Absorbers Based On Hybrid-Strategy Plasmonic Metamaterials

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

Effect Evaluation of Micro/nano Structured Materials on the Performance of Solar Thermophotovoltaic System: an Analysis Based on Measurement Data

A Nanostructure-Based High-Temperature Selective Absorber-Emitter Pair for a Solar Thermophotovoltaic System with Narrowband Thermal Emission

Highly efficient molybdenum nanostructures for solar thermophotovoltaic systems: One-step fabrication of absorber and design of selective emitter

Integrated Silicon-Based Spectral Reshaping Intermediate Structures for High Performance Solar Thermophotovoltaics

Performance of new designed meta-material absorbers/emitters reshaping solar spectrum to double-narrowband emissive spectrum for STPV power generation

Highly Efficient Semitransparent Solar Cells with Selective Absorption and Tandem Architecture.

Solar thermophotovoltaic energy conversion systems with two-dimensional tantalum photonic crystal absorbers and emitters

Tamm plasmon enabled narrowband thermal emitter for solar thermophotovoltaics

High-Temperature Refractory Metasurfaces for Solar Thermophotovoltaic Energy Harvesting

A High-Temperature Narrowband Selective Emitter For Solar Thermophotovoltaic Systems

Ultra-Broadband Solar Absorber and High-Efficiency Thermal Emitter from UV to Mid-Infrared Spectrum

Scalable-manufactured metal–insulator–metal based selective solar absorbers with excellent high-temperature insensitivity

High efficiency Titanium oxides and nitrides ultra-broadband solar energy absorber and thermal emitter from 200 nm to 2600 nm

Hybrid Solar Absorber–Emitter by Coherence‐Enhanced Absorption for Improved Solar Thermophotovoltaic Conversion

Scalable Selective Absorber with Quasiperiodic Nanostructure for Low-Grade Solar Energy Harvesting

Theoretical Study of Selective Absorber and Narrowband Emitter Based on Metamaterial Matched with InGaAsSb Cells for an STPV System

Design and Theoretical Study of a Metamaterial Absorber-Emitter Pair Matched with a Low-Bandgap PV Cell for an STPV System

Spectrum‐Selective High‐Temperature Tolerant Thermal Emitter by Dual‐Coherence Enhanced Absorption for Solar Thermophotovoltaics

Efficient, Scalable, And High-Temperature Selective Solar Absorbers Based On Hybrid-Strategy Plasmonic Metamaterials

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

High-performance near-field thermophotovoltaic device with CaF&lt;sub&gt;2&lt;/sub&gt;/W multilayer hyperbolic metamaterial emitter

Effect Evaluation of Micro/nano Structured Materials on the Performance of Solar Thermophotovoltaic System: an Analysis Based on Measurement Data

A Nanostructure-Based High-Temperature Selective Absorber-Emitter Pair for a Solar Thermophotovoltaic System with Narrowband Thermal Emission

Highly efficient molybdenum nanostructures for solar thermophotovoltaic systems: One-step fabrication of absorber and design of selective emitter

Integrated Silicon-Based Spectral Reshaping Intermediate Structures for High Performance Solar Thermophotovoltaics

Performance of new designed meta-material absorbers/emitters reshaping solar spectrum to double-narrowband emissive spectrum for STPV power generation

Highly Efficient Semitransparent Solar Cells with Selective Absorption and Tandem Architecture.

Solar thermophotovoltaic energy conversion systems with two-dimensional tantalum photonic crystal absorbers and emitters

Tamm plasmon enabled narrowband thermal emitter for solar thermophotovoltaics

High-Temperature Refractory Metasurfaces for Solar Thermophotovoltaic Energy Harvesting

A High-Temperature Narrowband Selective Emitter For Solar Thermophotovoltaic Systems

Ultra-Broadband Solar Absorber and High-Efficiency Thermal Emitter from UV to Mid-Infrared Spectrum

Scalable-manufactured metal–insulator–metal based selective solar absorbers with excellent high-temperature insensitivity

High efficiency Titanium oxides and nitrides ultra-broadband solar energy absorber and thermal emitter from 200 nm to 2600 nm

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter