Abstract:Abstract A water extraction device that takes water from air in dry area is proposed. This device is designed to meet domestic water demand in remote rural areas, where the climate is dry and fresh water is scarce. The device can be driven effectively by low-temperature waste heat and has the characteristics of large daily water production, low energy consumption per unit of water and high water quality. Because the moisture content of air in dry area is very low, the effect of direct condensation is limited. Solid adsorbent is able to adsorb water vapor from air at a low temperature and release water vapor at under high temperature, which can be used for water extracting from air. To improve its performance under dry circumstances, the key technical point of this device is to use solid adsorbent to collect water vapor from other air to raise its dew point temperature, and then use high temperature cold source to condense water vapor from it. In this paper, configurations of the solid adsorption are proposed, which can be driven with low regeneration temperature under the same humidity increasing amount. This device uses multi-stage desiccant wheels to realize humid increasing. Desiccant wheel can be driven with high temperature to take water vapor from dehumidification air and release water vapor to regeneration air. The multi-stage configuration is good for the reduction of regeneration temperature, making applications of low temperature waste heat form heat pumps possible. Then, influencing factors of water extracting rate are analyzed. The influencing of regeneration temperature, humid reduction amount of the humidified air and cooling and heating systems, etc., are analyzed. Last, air handling processes considering cold and heat sources are recommended to reduce energy consumption. The heat pump driven scenarios are discussed in particular. Through optimization, the water extracting rate can be increased and energy consumption per unit of water can be reduced. At present, this paper only studies air water extracting processes and thermal processes, and does not involve structure of the device, water purification and power consumption of fans, etc.

A Dehumidification Process with Cascading Desiccant Wheels to Produce Air with Dew Point below 0 °C

A Novel Air-Conditioning System with Cascading Desiccant Wheel and Liquid Desiccant Dehumidifier for Low-Humidity Industrial Environments

Analysis of a Hybrid System of Liquid Desiccant and CO2 Transcritical Cycles

Experimental Investigation and Effectiveness Analysis of a Desiccant Wheel Dehumidification System with Low Air Humidity

Numerical investigation and comparison on energy performance and exergy destruction of cascading deep dehumidification systems with dehumidification amount exceeding 95%

Performance investigation and exergy analysis of air-handling processes using liquid desiccant and a desiccant wheel

Experimental Investigation of Precooling Desiccant-Wheel Air-Conditioning System in a High-Temperature and High-Humidity Environment

Experimental Study on the Performance of an Improved Dehumidification System Integrated with Precooling and Recirculated Regenerative Rotary Desiccant Wheel

Development of a Novel Desiccant Chiller with Regenerative Evaporative Cooling.

Performance Study of a Liquid Desiccant Dehumidification System Driven by Low-temperature Heat for Industrial Application

Use of compound desiccant to develop high performance desiccant cooling system

Investigation on Recirculated Regenerative Solid Desiccant-Assisted Dehumidification System: Impact of System Configurations and Desiccant Materials

Use of Regenerative Evaporative Cooling to Improve the Performance of a Novel One-Rotor Two-Stage Solar Desiccant Dehumidification Unit

Performance Evaluations of Extracting Water From Dry Air Using Multi-Stage Desiccant Wheels and Vapor Compression Cycle

Cascade Deep Air Dehumidification with Integrated Direct-Contact Cooling and Liquid Desiccant Absorption

Experimental and Numerical Investigation of a Novel Hybrid Deep-Dehumidification System Using Liquid Desiccant

Performance Investigation of a Novel Hybrid Deep-Dehumidification Process Using Liquid Desiccant

Experimental Study on a Fresh Air Heat Pump Desiccant Dehumidification System Using Rejected Heat

Thermodynamic Analysis of a Hybrid Membrane Liquid Desiccant Dehumidification and Dew Point Evaporative Cooling System

Study on a Novel Thermally Driven Air Conditioning System with Desiccant Dehumidification and Regenerative Evaporative Cooling

Study on a Novel Hybrid Desiccant Dehumidification and Air Conditioning System