Abstract:One‐dimensional structured γ‐MnOOH nanorods were prepared by a simple and easy hydrothermal method, and the growth mechanism of γ‐MnOOH nanorods in the hydrothermal reaction system was proposed and discussed. The electrochemical test results show that the γ‐MnOOH nanorods exhibit high charge storage capacity as well as excellent cycle life. MnOOH has received much attention from researchers as a supercapacitor electrode material. In this article, one‐dimensional γ‐MnOOH nanorods were prepared by the hydrothermal method using the redox reaction between MnO4− and Mn2+, and the effects of temperatures on the crystalline phases and electrochemical properties of the samples were investigated. The materials were characterized using XRD, FT‐IR, SEM, TEM, Raman and XPS; electrochemical properties were tested using CV, GCD and EIS. The results show that the reaction temperature plays an important role in the generation of γ‐MnOOH. The samples were pure phases of γ‐MnOOH (M‐140) at the reaction temperature of 140 °C, showing interlaced nanorod morphology, and when the reaction temperature was increased to 180 °C, a mixed phase of MnOOH and Mn3O4 appeared. In contrast, the electrochemical performance of γ‐MnOOH nanorods (M‐140) was superior to the other samples, reaching a specific capacitance of 221 F/g at a current density of 0.2 A/g. The capacitance retention was 93.8 % after charging and discharging the M‐140 2000 times at a current density of 6 A/g. Supercapacitors assembled with γ‐MnOOHand activated carbon (AC) have excellent energy storage performance, and a high energy density of 40.6 Wh/kg is obtained at a power density of 196.7 W/kg.

Sol–gel Synthesis of K1.33Mn8O16 Nanorods and Their Applications for Aqueous K-ion Hybrid Supercapacitors

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Rapid Synthesis of Mn-Doped NiFe2O4 Nanosheet Arrays for High-Performance Hybrid Supercapacitors

Nanostructured LiMn2O4 Composite As High-Rate Cathode for High Performance Aqueous Li-ion Hybrid Supercapacitors

Kirkendall Effect Induced One-Step Fabrication of Tubular Ag/MnOx Nanocomposites for Supercapacitor Application

Electrochemical Performance of Mno2 Nanorods in Neutral Aqueous Electrolytes As A Cathode for Asymmetric Supercapacitors

Synthesis of MnO2/N-doped Ultramicroporous Carbon Nanospheres for High-Performance Supercapacitor Electrodes

Potassium Pre-Inserted K1.04Mn8O16 As Cathode Materials for Aqueous Li-ion and Na-ion Hybrid Capacitors

Co‐MnO 2 Nanorods for High‐Performance Sodium/Potassium‐Ion Batteries and Highly Conductive Gel‐Type Supercapacitors

V2O5·0.6H2O Nanoribbons As Cathode Material for Asymmetric Supercapacitor in K2SO4 Solution

Synthesis and Electrochemical Properties of One‐Dimensional γ‐MnOOH Nanorods

Manganous-Manganic Oxide@Carbon Core-Shell Nanorods for Supercapacitors with High Cycle Retention

Enhanced energy density and wide potential window for K incorporated MnO2@carbon cloth supercapacitor

Preparation and electrochemical performance of MnO2 nanorods as electrode materials for supercapacitor

Double-Carbon Matrix-Supported MnO 2 for High-Voltage Supercapacitors in a Neutral Aqueous System

Fabrication of a 1D Mn3O4 Nano-Rod Electrode for Aqueous Asymmetric Supercapacitors and Capacitive Deionization

In Situ Growth Of Mno2 Nanosheets On Activated Carbon Fibers: A Low-Cost Electrode For High Performance Supercapacitors

MnOx nanosheets anchored on a bio-derived porous carbon framework for high-performance asymmetric supercapacitors

MnO2@SnO2 core–shell heterostructured nanorods for supercapacitors

Carbon-decorated LiMn2O4 Nanorods with Enhanced Performance for Supercapacitors

In Situ Growth of MnO2 Nanosheets on a Graphite Flake as an Effective Binder-Free Electrode for High-Performance Supercapacitors