Abstract:In this paper, a new remote center of motion (RCM) mechanism is presented whose end-effector is able to move through an entire hemisphere. In general, minimally invasive surgery (MIS) applications, an elliptic cone workspace with vertex angles of 60° and 90° gives the surgeon enough freedom to operate. Therefore, the majority of the developed RCM mechanisms have such a cone as the workspace. However, there are still situations in which a larger workspace is required, like the breast ultrasound scanning application in which the RCM mechanisms should be able to move over a hemisphere to do the breast scanning. The proposed RCM mechanism is developed based upon a spherical scissor linkage and benefits from the high stiffness characteristics of parallel structures while eliminating the common problem of linkage collision in parallel structures. It has two rotational degrees of freedom that are decoupled from each other. The Jacobian and the stiffness of the mechanism while considering the bending of the links is calculated through the virtual joints method (VJM). The kinemato-static equations and the methodology for calculating stiffness are described in detail. The optimal arc angle of the mechanism’s links is found using a multi-objective genetic algorithm optimization. A prototype of the mechanism is built and forward kinematic of the proposed mechanism is examined experimentally. The experiments indicate that the proposed mechanism is able to provide a hemisphere as its workspace while the RCM point of the mechanism is fixed in the space.

A New Type of Planar Two Degree-of-Freedom Remote Center-of-Motion Mechanism Inspired by the Peaucellier–Lipkin Straight-Line Linkage

Design and Validation of A Novel Planar 2R1T Remote Center-of-motion Mechanism Composing of Dual-Triangular and Straight-Line Linkages

A new circular-guided remote center of motion mechanism for assistive surgical robots

Design of a 1R1T planar mechanism with remote center of motion

Design and Kinematic Optimization of a Two Degrees-of-Freedom Planar Remote Center of Motion Mechanism for Minimally Invasive Surgery Manipulators

Kinematic Design of a 2DoFs Remote Center of Motion Mechanism for Minimally Invasive Surgical Robot

Design and validation of a spatial two-limb 3R1T parallel manipulator with remote center-of-motion

Design and Optimization of Remote Center Motion Mechanism of Minimally Invasive Surgical Robotics

Design of a spherical parallel mechanism with controllable center of rotation using a spherical reconfiguration linkage

Design of double parallelogram remote-center-of-motion mechanisms

Optimal Design of a Novel Spherical Scissor Linkage Remote Center of Motion Mechanism for Medical Robotics

A new family of double-stage parallel mechanisms with movable RCM

Development of a 2-DOF Singularity-Free Spherical Parallel Remote Center of Motion Mechanism With Extensive Range of Motion

Two types of remote-center-of-motion deployable manipulators with dual scissor-like mechanisms

Type Synthesis of 1R1T Remote Center of Motion Mechanisms

Center-driven planar closed-loop mechanisms based on an angulated four-bar linkage

Kinematics and Force Transmission Analysis of a Decoupled Remote Center of Motion Mechanism Based on Intersecting Planes

Design and Kinematic Analysis of a Parallel Robot with Remote Center of Motion for Minimally Invasive Surgery

Development of a Base-Actuated Three-Rhombus Configured Remote Center Of Motion Mechanism for Lumbar Puncture

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Design and Analysis of a New Remote Center-of-Motion Parallel Robot for Minimally Invasive Surgery.