Abstract:The aerospace, automotive, and marine industries are heavily reliant on sandwich panels with cellular material cores. Although honeycombs with hexagonal cells are the most commonly used geometries as cores, recently there have been new alternatives in the design of lightweight structures. The present work aims to evaluate the mechanical properties of metallic and polymeric honeycomb structures, with configurations recently proposed and different in-plane orientations, produced by additive and subtractive manufacturing processes. Structures with configurations such as regular hexagonal honeycomb (Hr), lotus (Lt), and hexagonal honeycomb with Plateau borders (Pt), with 0°, 45°, and 90° orientations were analyzed. To evaluate its properties, three-point bending tests were performed, both experimentally and by numerical modeling, by means of the finite element method. Honeycombs of two aluminum alloys and polylactic acid were fabricated. The structures produced in aluminum were obtained either by selective laser melting technology or by machining, while polylactic acid structures were obtained by material extrusion using fused filament fabrication. From the stress distribution analysis and the load–displacement curves, it was possible to evaluate the strength, stiffness, and absorbed energy of the structures. Failure modes were also analyzed for polylactic acid honeycombs. In general, a strong correlation was observed between numerical and experimental results. The results show that the stiffness and absorbed energy increase in the order, Hr, Pt, Lt, and with the orientation through the sequence, 45°, 90°, 0°. Thus, Lt structures with 0° orientation seem to be good alternatives to the traditional honeycombs used in sandwich composite panels for those industrial applications where low weight, high stiffness, and large energy-absorbing capacity are required.

Equivalent Properties of Composite Sandwich Panels with Honeycomb–grid Hybrid Core

Research on mechanical properties of composite grid structures

Effect of an S-shaped reinforced core on the compression properties of composite honeycomb sandwich panel and tube structures

Equivalent-oriented model for sandwich panels with ZPR accordion honeycomb

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

An approach on identification of equivalent properties of honeycomb core using experimental modal data

Dynamic Characteristics and Effective Stiffness Properties of Sandwich Panels with Hierarchical Hexagonal Honeycomb

Experimental and Numerical Studies on Core Stiffened Sandwich Composite Panel

A comprehensive investigation on bending stiffness of composite grid-stiffened and functional foams sandwich beam

Analysis of effect of variation of Honeycomb core cell size and sandwich panel width on the stiffness of a sandwich structure

In-plane compressive response of composite sandwich panels with local-tight honeycomb cores

Identification of Equivalent Stiffness Parameters of Honeycomb Sandwich Shell Using Detailed Cell Structure Analysis

Static and dynamic properties of star-shaped honeycomb sandwich panels

Analysis of vibrational characteristics of all-composite honeycomb core sandwich panels: theoretical and experimental study

Evaluation of the influence of design in the mechanical properties of honeycomb cores used in composite panels

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core

Flexural and impact response of sandwich panels with Nomex honeycomb core and hybrid fiber composite skins

VAM-based equivalent-homogenization model for 3D re-entrant auxetic honeycomb structures

Flexural Performance of Composite Grid Panels with Deep Ribs

Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study