Abstract:We report the first demonstration of hydrogen treatment as a simple and effective strategy to fundamentally improve the performance of TiO(2) nanowires for photoelectrochemical (PEC) water splitting. Hydrogen-treated rutile TiO(2) (H:TiO(2)) nanowires were prepared by annealing the pristine TiO(2) nanowires in hydrogen atmosphere at various temperatures in a range of 200-550 °C. In comparison to pristine TiO(2) nanowires, H:TiO(2) samples show substantially enhanced photocurrent in the entire potential window. More importantly, H:TiO(2) samples have exceptionally low photocurrent saturation potentials of -0.6 V vs Ag/AgCl (0.4 V vs RHE), indicating very efficient charge separation and transportation. The optimized H:TiO(2) nanowire sample yields a photocurrent density of ∼1.97 mA/cm(2) at -0.6 V vs Ag/AgCl, in 1 M NaOH solution under the illumination of simulated solar light (100 mW/cm(2) from 150 W xenon lamp coupled with an AM 1.5G filter). This photocurrent density corresponds to a solar-to-hydrogen (STH) efficiency of ∼1.63%. After eliminating the discrepancy between the irradiance of the xenon lamp and solar light, by integrating the incident-photon-to-current-conversion efficiency (IPCE) spectrum of the H:TiO(2) nanowire sample with a standard AM 1.5G solar spectrum, the STH efficiency is calculated to be ∼1.1%, which is the best value for a TiO(2) photoanode. IPCE analyses confirm the photocurrent enhancement is mainly due to the improved photoactivity of TiO(2) in the UV region. Hydrogen treatment increases the donor density of TiO(2) nanowires by 3 orders of magnitudes, via creating a high density of oxygen vacancies that serve as electron donors. Similar enhancements in photocurrent were also observed in anatase H:TiO(2) nanotubes. The capability of making highly photoactive H:TiO(2) nanowires and nanotubes opens up new opportunities in various areas, including PEC water splitting, dye-sensitized solar cells, and photocatalysis.

Water Splitting: the “midas Touch” Transformation of TiO2 Nanowire Arrays During Visible Light Photoelectrochemical Performance by Carbon/Nitrogen Coimplantation (adv. Energy Mater. 20/2018)

The “midas Touch” Transformation of TiO2 Nanowire Arrays During Visible Light Photoelectrochemical Performance by Carbon/Nitrogen Coimplantation

Significantly Enhanced Visible Light Photoelectrochemical Activity in TiO2 Nanowire Arrays by Nitrogen Implantation

Bulk-phase and Surface Dual-Defective Engineering Enabled Ti-based Nanotubes Photoanode for Highly Efficient Photoelectrochemical Water Splitting

Synergistic Effect of Plasmonic Gold Nanoparticles Decorated Carbon Nanotubes in Quantum Dots/TiO2 for Optoelectronic Devices

Enhancing the photoelectrochemical performance of TiO2 photoanode by employing carbon nanoparticles as electron reservoirs and photothermal materials

Cu-Ion-Implanted and Polymeric Carbon Nitride-Decorated TiO2 Nanotube Array for Unassisted Photoelectrochemical Water Splitting.

Ultra-thin carbon doped TiO2 nanotube arrays for enhanced visible-light photoelectrochemical water splitting

Carbon Doped TiO2 Nanowire Arrays with Improved Photoelectrochemical Water Splitting Performance

Preparation of the Tio2/Graphic Carbon Nitride Core-Shell Array As A Photoanode for Efficient Photoelectrochemical Water Splitting

(Invited) Functional Nanostructures for Highly Efficient Photoelectrochemical Water Splitting

Facile Preparation of Ti3+/Ni Co-Doped TiO2 Nanotubes Photoanode for Efficient Photoelectrochemical Water Splitting

Optimization of photoelectrochemical water splitting performance on hierarchical TiO2 nanotube arrays

High-efficiency Photoelectrochemical Water Splitting with Heterojunction Photoanode of In2O3-x Nanorods/black Ti–Si–O Nanotubes

Enhanced Photoelectrochemical Water Splitting with TiO2@Ag2O Nanowire Arrays Via P-N Heterojunction Formation

Efficient Charge Transfer and Separation of TiO2@NiCo-LDH Core-Shell Nanowire Arrays for Enhanced Photoelectrochemical Water-Splitting

Hydrogen-treated TiO2 nanowire arrays for photoelectrochemical water splitting

Influence of Controlled Pd Nanoparticles Decorated TiO2 Nanowire Arrays for Efficient Photoelectrochemical Water Splitting

Facile Fabrication of Organic/inorganic Nanotube Heterojunction Arrays for Enhanced Photoelectrochemical Water Splitting.

Visible-light-driven photocatalytic carbon-doped porous ZnO nanoarchitectures for solar water-splitting

Synergistic Promotion of Photoelectrochemical Water Splitting Efficiency of TiO2 Nanorods Using Metal-Semiconducting Nanoparticles