Abstract:A bioinspired hierarchical nanofibrous Fe3O4-TiO2-carbon composite was fabricated by employing natural cellulose substance (e.g., filter paper) as both the scaffold and the carbon source and showed improved electrochemical performances when it is employed as an anode material for lithium-ion batteries. FeOOH nanoparticles were first grown uniformly onto the surface of the titania thin-layer precoated cellulose nanofibers, and thereafter, the as-prepared FeOOH-TiO2-cellulose composite was calcined and carbonized in argon atmosphere at 500 °C for 6 h to produce the Fe3O4-TiO2-carbon composite. The resultant composite possesses a hierarchical structure that was faithfully inherited from the initial cellulose substance, which was composed of titania-coated carbon fibers with corncob-like shaped Fe3O4 nanoparticles immobilized on the surfaces. The diameter of the composite nanofiber is ca. 100-200 nm, and the diameter of the Fe3O4 nanoparticle is about 30 nm, which is coated with an ultrathin carbon layer with a thickness about 3 nm. This composite displayed superior lithium-ion storage performance. It showed a first-cycle discharge capacity of 1340 mAh/g, delivering a stable reversible capacity of ca. 525 mAh/g after 100 charge-discharge cycles at a current density of 100 mA/g, and the efficiency is as high as ca. 95% of the theoretical value. This is much higher than those of the commercial Fe3O4 powder (160 mAh/g) and the Fe3O4-carbon counter material (310 mAh/g). It was demonstrated that the thin titania precoating layer (thickness ca. 3-5 nm) is necessary for the high content loading of the Fe3O4 nanoparticles onto the carbon nanofibers. Owing to the unique three-dimensional porous network structure of the carbon-fiber scaffold, together with the ultrathin outer carbon-coating layer, the composite showed significantly improved cycling stability and rate capability.

In Situ Growth of Β-Feooh on Hierarchically Porous Carbon As Anodes for High-Performance Lithium-Ion Batteries

Fe1-xS/C nanocomposites from sugarcane waste-derived microporous carbon for high-performance lithium ion batteries

Fe3O4-Embedded and N-Doped Hierarchically Porous Carbon Nanospheres As High-Performance Lithium Ion Battery Anodes

A Fe/Fe3O4/N-carbon composite with hierarchical porous structure and in situ formed N-doped graphene-like layers for high-performance lithium ion batteries.

In Situ Ion–Exchange Synthesis of Fe3O4 Nanosheets with 3D Hierarchically Porous Carbon Frameworks for High‐Performance Energy Storage

Functionalized Bioinspired Porous Carbon with Graphene Sheets As Anode Materials for Lithium-Ion Batteries

Porous FeP/C Composite Nanofibers As High-Performance Anodes for Li-ion/Na-ion Batteries

Hierarchical Porous Fe2O3 Assisted with Graphene-Like Carbon As High-Performance Lithium Battery Anodes

High Electrochemical Cycling Performance Through Accurately Inheriting Hierarchical Porous Structure from Bagasse

Hierarchical pores from microscale to macroscale boost ultrahigh lithium intercalation pseudocapacitance of biomass carbon

Synthesis of Β-Feooh Nanorods Adhered to Pine-Biomass Carbon As a Low-Cost Anode Material for Li-ion Batteries

Mn0.5Co0.5Fe2O4 nanoparticles highly dispersed in porous carbon microspheres as high performance anode materials in Li-ion batteries

Bio-Inspired Hierarchical Nanofibrous Fe3O4-TiO2-Carbon Composite as a High-Performance Anode Material for Lithium-Ion Batteries.

FexOy Nanoparticles In-Situ Embedded in Porous Carbon Framework Towards Improved Lithium Storage

In Situ Fabrication of Porous Graphene Electrodes for High-Performance Lithiumoxygen Batteries

Simple fabrication of a Fe2O3/carbon composite for use in a high-performance lithium ion battery

Growth of 3d Hierarchical Porous Nio@Carbon Nanoflakes on Graphene Sheets for High-Performance Lithium-Ion Batteries

Biomass-Derived 3D Interconnected Porous Carbon-Encapsulated Nano-FeS2 for High-Performance Lithium-Ion Batteries

Improved Electrochemical Performance of Porous Fe3o4/Carbon Core/Shell Nanorods As an Anode for Lithium-Ion Batteries

Porous Carbon with Alumina Coating Nanolayer Derived from Biomass and the Enhanced Electrochemical Performance As Stable Anode Materials.

Fe-N-C decorated fibrous network-wrapped biomass SiOx/C with gradient conductive structure for high performance Li-ion battery anodes