Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Magnitude And Rate Of Migration Of Fine Subgrade Soil Into Granular Subbase Under Scaled Flexible Interstate Pavement

Measuring the Migration of Subgrade Fine Particles into Subbase Using Scaled Accelerated Flexible Pavement Testing – a Laboratory Study

Experimental Simulation and Quantification of Migration of Subgrade Soil into Subbase under Rigid Pavement Using Model Mobile Load Simulator

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Modeling of Unsaturated Granular Materials in Flexible Pavements

Development of a Mechanistic-Empirical Model to Predict Equilibrium Suction for Subgrade Soil

Reduction of subgrade fines migration into subbase of flexible pavement using geotextile

Investigation of Water and Soil Migration and Mud Pumping of Subgrades under Traffic Load

Influence of Matric Suction on the Long-Term Behavior of Fouled Road Base Materials Under Traffic Loading

Influence of Grain Gradation on Permanent Strain of Unbound Granular Materials under Low Confining Pressure and High-Cycle Loading

A Combined Method to Predict the Long-Term Settlements of Roads on Soft Soil under Cyclic Traffic Loadings

A Mechanistic-Empirical Approach to Quantify the Influence of Geogrid on the Performance of Flexible Pavement Structures

Experimental Investigation into the Shakedown State of Unsaturated Road Base Aggregate at Various Fine Contents and Matric Suctions

Tracking particle displacements in unbound aggregate layers of roadways

Centrifuge Modeling of a Saturated Clay Ground under Cyclic Loading

A Constitutive Model for the Accumulated Strain of Unsaturated Soil under High‐cycle Traffic Loading

A laboratory investigation and numerical modeling on fiber reinforced lime and alkaline binder stabilized pavement subgrade soil

Numerical Evaluation of Suction Effects and Groundwater Table Variations on Long-Term Pavement Subgrade Performance