Abstract:Developing effective, stable, and economical electrocatalysts to achieve highly efficient overall water splitting under a large current density in industries is critical for renewable H2 production. Here, benefiting from one-step preoxidation that makes Co foam to act not only as a conductive collector but also as the sole cobalt source, a seamless integrated electrode (Fe2P-Co2P/CF) is successfully synthesized in which Co2P, Fe2P, and Co foam are tightly connected by chemical bonds to construct a versatile, highly active, and a durable catalyst for water splitting in an alkaline medium. Such an electrode only requires 145, 208, and 254 mV for hydrogen evolution reaction (HER), while it requires 243, 291, and 317 mV for oxygen evolution reaction (OER) to deliver current densities of 100, 500, and 1000 mA cm–2, respectively. Notably, using Fe2P-Co2P/CF as both an anode and a cathode at room (25 °C) and quasi-industrial (65 °C) temperatures, the operating voltages are as low as 1.87 and 1.71 V to reach 500 mA cm–2, respectively, together with excellent long-term durability over 300 h. The prominent performance is due to the robust in situ growth together with the formation of a strongly coupled heterojunction between Fe2P and Co2P, making it one of the most potential candidates to meet the large-scale application of industrial water electrolysis.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06987?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06987</a>.Additional XRD patterns, Raman spectra, SEM images, TEM images, and XPS spectra of the as-prepared samples and the samples after reaction; additional electrochemical measurements of CV curves, LSV curves, and LSV curves normalized by ECSA; and tables for comparing the performance of some representative catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06987/suppl_file/sc0c06987_si_001.pdf">PDF</a>)Electrolysis of water at 25 and 65 °C with a large amount of gas production and rapid gas release on Fe2P-Co2P/CF electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06987/suppl_file/sc0c06987_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

A Large‐Scale Graphene–Bimetal Film Electrode with an Ultrahigh Mass Catalytic Activity for Durable Water Splitting

Overall water splitting by graphdiyne-exfoliated and -sandwiched layered double-hydroxide nanosheet arrays

Graphene/MoS2/FeCoNi(OH)x and Graphene/MoS2/FeCoNiPx multilayer-stacked vertical nanosheets on carbon fibers for highly efficient overall water splitting

Integrated Bifunctional Electrodes Based on Amorphous Co-Ni-S Nanoflake Arrays with Atomic Dispersity of Active Sites for Overall Water Splitting.

Fe7S8/N-doped Graphene Foam Composite as Efficient Bifunctional Electrocatalysts for Overall Water Splitting

A Freestanding 3D Heterostructure Film Stitched by MOF‐Derived Carbon Nanotube Microsphere Superstructure and Reduced Graphene Oxide Sheets: A Superior Multifunctional Electrode for Overall Water Splitting and Zn–Air Batteries

Scalable synthesis of self-assembled bimetallic phosphide/N-doped graphene nanoflakes as an efficient electrocatalyst for overall water splitting.

Metal-Organic Framework-Derived Co3ZnC/Co Embedded in Nitrogen-Doped Carbon Nanotube-Grafted Carbon Polyhedra As a High-Performance Electrocatalyst for Water Splitting.

Systematic Design of Superaerophobic Nanotube-Array Electrode Comprised of Transition-Metal Sulfides for Overall Water Splitting

3D Printed Mechanically Robust Graphene/CNT Electrodes for Highly Efficient Overall Water Splitting

Cost-Effective Vertical Carbon Nanosheets/Iron-Based Composites As Efficient Electrocatalysts for Water Splitting Reaction

Self-Supported Hierarchical Nanostructured NiFe-LDH and Cu3P Weaving Mesh Electrodes for Efficient Water Splitting

Large-Scale, Low-Cost, and High-Efficiency Water-Splitting System for Clean H2 Generation.

Integrated Hierarchical Cobalt Sulfide/Nickel Selenide Hybrid Nanosheets As an Efficient Three-dimensional Electrode for Electrochemical and Photoelectrochemical Water Splitting.

In Situ Constructing Lamella-Heterostructured Nanoporous CoFe/CoFe2O4 and CeO2−x As Bifunctional Electrocatalyst for High-Current-density Water Splitting

Monolithic Ni‐Mo‐B Bifunctional Electrode for Large Current Water Splitting

Engineering transition metal catalysts for large-current-density water splitting

In Situ-Grown Cobalt–Iron Phosphide-Based Integrated Electrode for Long-Term Water Splitting under a Large Current Density at the Industrial Electrolysis Temperature

Vertically oriented cobalt selenide/NiFe layered-double-hydroxide nanosheets supported on exfoliated graphene foil: an efficient 3D electrode for overall water splitting

Electrocatalyst Derived from NiCu–MOF Arrays on Graphene Oxide Modified Carbon Cloth for Water Splitting

An Iron-Group Metal Boride/Boron-Doped Vertically Oriented Graphene as Efficient Catalyst for Overall Water Splitting in a Wide pH Range