Abstract:The alkythiofuran-based benzo[1,2-b:4,5-b']difuran (BDFS) unit presents the planar and rigid structure with favorable inter/intramolecular interactions and is expected to be a promising building block to construct the highly efficient photovoltaic polymers. Herein, we reported two novel wide-bandgap conjugated polymers, PBDFS-Bz and PBDFS-fBz, which were based on BDFS and benzo[d][1,2,3]triazole (Bz) units, and investigated their photovoltaic performances in fullerene-free polymer solar cells (PSCs). PBDFS-Bz and PBDFS-fBz show similar optical properties with the wide bandgaps of similar to 1.88 eV. The HOMO energy level of PBDFS-Bz is at -5.30 eV, whereas it is downshifted to -5.45 eV for PBDFS-fBz due to the strong electron-withdrawing fluorine substitutes. The optimized fullerene-free PSC based on PBDFS-Bz:ITIC achieved a power conversion efficiency (PCE) of 8.07% with a V-oc, of 0.82 V, a J(sc) of 15.14 mA cm(-2), and a FF of 65%. Under the same conditions, PBDFS-fBz:ITIC device won a promising PCE of 9.00% with an enhanced V-oc, of 0.88 V, a J(sc) of 15.26 mA cm(-2), and a FF of 67.0%. It is found that the improved photovoltaic performance of PBDFS-fBz:ITIC device is mainly due to the enhanced V, in comparison with that of PBDFS-Bz:ITIC device. To the best of our knowledge, the photovoltaic performances are among the best devices reported for fullerene-free PSCs with BDF polymers as donors. These results demonstrate that the rational design of BDF building block is highly important in obtaining the state-of-the-art photovoltaic performances.

Two-dimensionalbenzo [ 1 , 2-B : 4 , 5b ' ] Difuran-Based Wide Bandgap Conjugated Polymers for Efficient Fullerene-Free Polymer Solar Cells

Wide-Bandgap Conjugated Polymers Based on Alkylthiofuran-Substituted Benzo[1,2-b:4,5-b′]difuran for Efficient Fullerene-Free Polymer Solar Cells

Halogenation on Benzo[1,2-B:4,5-B′]difuran Polymers for Solvent Additive-Free Non-Fullerene Polymer Solar Cells with Efficiency Exceeding 11%

Chain Engineering of Benzodifuran-Based Wide-Bandgap Polymers for Efficient Non-Fullerene Polymer Solar Cells

Highly Efficient Non-Fullerene Polymer Solar Cells from a Benzo[1,2-B:4,5-B′]difuran-based Conjugated Polymer with Improved Stabilities

Wide Bandgap Dithienobenzodithiophene-Based Π-Conjugated Polymers Consisting of Fluorinated Benzotriazole and Benzothiadiazole for Polymer Solar Cells

An Asymmetrical Polymer Based on Thieno[2,3-f]benzofuran for Efficient Fullerene-Free Polymer Solar Cells

A Wide-Bandgap Conjugated Polymer Based on Quinoxalino[6,5-f ]quinoxaline for Fullerene and Non-Fullerene Polymer Solar Cells

Two-dimensional Like Conjugated Copolymers for High Efficiency Bulk-Heterojunction Solar Cell Application: Band Gap and Energy Level Engineering

Design of Wide-Bandgap Polymers with Deeper Ionization Potential Enables Efficient Ternary Non-Fullerene Polymer Solar Cells with 13% Efficiency

Non‐Fullerene Organic Solar Cells Based on Benzo[1,2‐b:4,5‐b′]difuran‐Conjugated Polymer with 14% Efficiency

Benzodifuran-based π-conjugated copolymers for bulk heterojunction solar cells

Benzodifuran-Containing Well-Defined Pi-Conjugated Polymers For Photovoltaic Cells

Difluorobenzoxadiazole-based Conjugated Polymers for Efficient Non-Fullerene Polymer Solar Cells with Low Voltage Loss

Wide Bandgap Conjugated Polymers Based on Difluorobenzoxadiazole for Efficient Non-Fullerene Organic Solar Cells

Nonhalogen Solvent‐Processed Asymmetric Wide‐Bandgap Polymers for Nonfullerene Organic Solar Cells with over 10% Efficiency

Dithienobenzoxadiazole-based wide bandgap donor polymers with strong aggregation properties for the preparation of efficient as-cast non-fullerene polymer solar cells processed using a non-halogenated solvent

High-Efficiency Nonfullerene Polymer Solar Cells with Medium Bandgap Polymer Donor and Narrow Bandgap Organic Semiconductor Acceptor.

High-performance as-cast non-fullerene polymer solar cells from benzo[1,2- b :4,5- b ′]difuran polymer via a rational copolymer design

Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer-fullerene solar cells.

A New Wide-Bandgap Conjugated Polymer Based on Imide-Fused Benzotriazole for Highly Efficient Nonfullerene Polymer Solar Cells