Abstract:In this paper, we experimentally demonstrated a bending sensor based on Michelson interferometer (MI). The sensor was fabricated by fusion splicing single-mode fiber (SMF) and multimode fiber (MMF) spheres. The improved end-face packaging scheme was adopted to realize the measurement of bending. The advantage of MMF numerical aperture increases the mode field diameter and the number of modes. Fiber bending induces transition between modes, resulting in the generation and fade of fiber modes, achieving the emergence of bending turning points (BTPs). The BTP is defined as the point where the direction of interference dip shift changes due to fiber bending. By observing the direction of interference dip shift during bending, the degree of bending can be intuitively estimated. The simulation results verify the generation and fade of excited modes in the bending MMF peanut-like structure, which are in good agreement with the experimental results. When the sensor is installed in parallel and titled ways, due to the uneven force of the plate in the bending state, it shows the differences in sensitivity, BTP and initial bending response. Further, the BTP can be roughly adjusted by the MMF core diameter, and the deviation of the sensitivity is reflected in the length of the interference arm. Besides, compact size, low cost and low hysteresis make the sensor more competitive in harsh environment applications.

Directional Bending Sensor Based on a Dual Side-Hole Fiber Mach–Zehnder Interferometer

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

In-Fiber Mach-Zehnder Interferometer Based on Three-Core Fiber for Measurement of Directional Bending

An In-Fiber Mach-Zehnder Interferometer Based on Dual Side-Hole Fiber for Highly Sensitive Measurement of Curvature

Fiber-Optic Bending Vector Sensor Based on Mach -Zehnder Interferometer Exploiting Lateral-Offset and Up-Taper

Temperature-compensated fiber directional-bend sensor based on a sandwiched MMF–PMPCF structure

Directional bending sensor based on asymmetrical multicore fiber Mach–Zehnder interferometer

In-Line Mach-Zehnder Interferometer with D-Shaped Fiber Grating for Temperature-Discriminated Directional Curvature Measurement

Two-axis Bending Vector Sensor Based on a Long-Period Fiber Grating Cascading with a Hump-Shaped Taper

A Fiber Bending Vector Sensor Based on M-Z Interferometer Exploiting Two Hump-Shaped Tapers

Bending Vector Sensor Based on Mach–Zehnder Interferometer Using S Type Fibre Taper and Lateral-Offset

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Directional Torsion and Temperature Discrimination Based on a Multicore Fiber with a Helical Structure.

Bending Direction Detective Fiber Sensor for Dual-Parameter Sensing Based on an Asymmetrical Thin-Core Long-Period Fiber Grating

Curvature and Temperature Measurement Based on a Few-Mode PCF Formed M-Z-I and an Embedded FBG.

Simultaneous Curvature and Temperature Sensing Based on a Novel Mach-Zehnder Interferometer

Single hole twin eccentric core fiber sensor based on anti-resonant effect combined with inline Mach-Zehnder interferometer.

Simultaneous Directional Curvature and Temperature Sensor Based on a Tilted Few-Mode Fiber Bragg Grating.

An In-Fiber Dual Air-Cavity Fabry–Perot Interferometer for Simultaneous Measurement of Strain and Directional Bend

Fiber Bending Sensor with Turning Point in a Multimode Fiber Peanut-Like Structure

Dual-dip Long-Period Fiber Gratings for Directional Bending Measurement