Abstract:It is difficult to separate Mo from tungstate solution due to their extreme similar chemical properties. At present the most effective method for separating Mo from tungstate solution is based on the sulfur affinity of Mo. Through sulfidation, MoO(4)(2-) can be transformed into MoS(4)(2-), while W still exists as WO(4)(2-), and then MoS(4)(2-) can be selectively separated.We notice that copper also shows strong affinity towards sulfur, and copper or copper compounds can adsorb sulfur-containing species through Cu-S bonding. Then, if copper or its compounds can be loaded on the surface of an appropriate carrier with high specific surface area, a new effectively adsorbent for removing Mo should be prepared.In this research, activated carbon is chosen as the carrier to load copper to prepare a new adsorbent, and the preparation technology is investigated. The results indicate that the optimal preparation conditions of copper-loaded activated carbon comprise electroplating voltage 4 V. electroplating time 20 min, calcination time 2 h and sulfidation with Na(2)S solution. Under the conditions of adsorption time 30 min and 5.0 g copper-loaded activated carbon, 98.85% Mo can be removed from 100 mL feed solution with 50 g L(-1) WO(3) and 0.351 g L(-1) Mo. There are only 0.001-0.008 g WO(3)/g Mo lost and all the separation coefficients (after separation, separation coefficient = (WO(3(in solution))/WO(3(in residue)))/(Mo((in solution))/ MO((in residue)))) are higher than 6000. Freundlich isothermal adsorption model is employed to study the adsorption mechanism and it can well describe the relationship between adsorption capacity and equilibrium concentration. (C) 2010 Published by Elsevier Ltd.

Removal of Tungsten from Molybdate Solution by Fe–Mn Binary Oxide Adsorbent

Removal of Tungsten from the Sodium Molybdate Solution Using Nascent MnO2

Study on Removal of Tungsten from Molybdate Solutions

Molybdenum Separation from Sodium-Tungstate-Molybdenum Aqueous Solutions Using an Anionic Gel-Based 201 × 7 Resin

Removing Molybdenum from Tungstate Solution with Metal Sulfides

Removal of Thorium and Uranium from Aqueous Solution by Adsorption on Hydrated Manganese Dioxide

Tungsten Removal from Molybdate Solutions Using Chelating Ion-Exchange Resin: Equilibrium Adsorption Isotherm and Kinetics

Study on Removing Mo from Tungstate Solution by Activated Carbon Loaded with Copper

Study on removing Mo from tungstate solution using coprecipitation adsorption method based on novel Mo sulphidation process

Selective Precipitation of Tungstate from Molybdate-Containing Solution Using Divalent Ions

Study on the Separation of Molybdenum from Tungstate Solution by a Novel Ion-exchange Resin

Separation of Molybdenum from Tungstate Solution—Scavenging Thiomolybdate by Copper Compound

Removal of Tungsten and Vanadium from Molybdate Solutions Using Ion Exchange Resin

Molybdenum Removal by the Functions of Adsorption and Precipitation of Resin

Separation of Molybdenum from Tungstate Solution by a Combination of Moving Packed Bed and Fluid Bed Ion-Exchange Techniques

Separation of Tungsten from Molybdate Using Solvent Extraction with Primary Amine N1923

Selective Extraction and Deep Removal of Tungsten from Sodium Molybdate Solution by Primary Amine N1923

Removal of Mo from sulfurized tungstate solution by using alkalescent anion exchange resin

Continuous Solvent Extraction Operations for the Separation of W and Mo in High Concentrations from Ammonium Solutions with Acidified N1923

Removal of molybdenum by TBP-TRPO extraction in sodium isopolytungstate solution

Theoretical Basis for the Separation of W and Mo with Manganese Dioxide: A Speciation-Based Approach