Abstract:In this study, the texture formation mechanism of a TA15 titanium alloy under different plane strain compression conditions was investigated by analyzing the slipping, dynamic recrystallization (DRX) and phase transformation behaviors. The results indicated that the basal texture component basically appears under all conditions, since the dominant basal slip makes the C-axis of the α grain rotate to the normal direction (ND, i.e., compression direction), but it has a different degree of deflection. With an increase in deformation amount, temperature or strain rate, {0001} poles first approach the ND and then deviate from it. Such deviation is mainly caused by a change in slip behaviors and phase transformation. At a smaller deformation amount and higher strain rate, inhomogeneous deformation easily causes a basal slip preferentially arising from the grain with a soft orientation, resulting in a weak basal texture component. A greater deformation amount can increase the principal strain ratio, thereby promoting other slip systems to be activated, and a lower temperature can increase the critical shear stress of the basal slip, further causing a dispersive orientation under these conditions. At a higher temperature and a lower strain rate, apparent phase transformation will induce the occurrence of lamellar α whose orientation obeys the Burgers orientation of the β phase, thereby disturbing and weakening the deformation texture. As for DRX, continuous-type (CDRX) is most common under most conditions, whereas CDRX grains have a similar orientation to deformed grains, so DRX has little effect on overall texture. Moreover, the microhardness of samples is basically inversely proportional to the grain size, and it can be significantly improved as lamellar α occurs. In addition, deformed samples with a weaker texture present a higher microhardness due to the smaller Schmidt factors of the activated prism slip at ambient loading.

Experimental and Simulated Analysis of Texture Evolution of TA15 Titanium Alloy Sheet During Hot Tensile Deformation at 750°C

Study on High-Temperature Flow Behavior and Substructure and Texture Evolution of TA15 Titanium Alloy

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

The Role of Deformation and Microstructure Evolution on Texture Formation of a TA15 Alloy Subjected to Plane Strain Compression

Mechanism of Crystallographic Orientation and Texture Evolution of Ti60 Alloy during Plane Strain Compression

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Orientation Dependent Behavior of Tensile-Creep Deformation of Hot Rolled Ti65 Titanium Alloy Sheet

Texture Evolution Associated with the Preferential Recrystallization During Annealing Process in a Hot-Rolled Near Β Titanium Alloy

An Experimental Study on the Mechanism of Texture Evolution During Hot-Rolling Process in a Β Titanium Alloy

Microstructure and Texture Variations in High Temperature Titanium Alloy Ti65 Sheets with Different Rolling Modes and Heat Treatments

Prediction of anisotropic deformation behavior of TA32 titanium alloy sheet during hot tension by crystal plasticity finite element model

Effect of Solution Treatment on Microstructure, Texture, and Anisotropy of Mechanical Properties in TA10 (Ti-0.3Mo-0.8Ni) Sheet

Texture Evolution During Isothermal Compression Process of Ti-22Al-25Nb Alloy in B2 Phase Region

Texture Evolution and Dynamic Recrystallization in a Beta Titanium Alloy During Hot-Rolling Process

Hot Deformation Behavior, Dynamic Recrystallization, and Texture Evolution of Ti–22Al–25Nb Alloy

Experiments and Crystal Plasticity Finite Element Simulations of Texture Development during Cold Rolling in a Ti-15V-3Cr-3Sn-3Al Alloy

Grain Morphology and Texture Evolution of TC21 Titanium Alloy During Annealing with Different Time

Effect of Pre-Annealing Deformation on the Recrystallized Texture and Grain Boundary Misorientation in Commercial Pure Titanium

Microstructure and Texture Evolution in a Post-dynamic Recrystallized Titanium During Annealing, Monotonic and Cyclic Loading

Substructure and Texture Evolution and Flow Behavior of TA15 Titanium Alloy Compressed in the Alpha + Beta Two-Phase Field

The Action Mechanism of Rolling Texture on the Anisotropic Behavior of a Pure Titanium Plate