Abstract:Since increasing demands for high efficiency of high speed rotating machines in recent years, the clearance between rotor and stator becomes smaller and smaller. Consequently, rub-impact fault is more likely to occur. It has become one of the most common and serious malfunctions for rotor system in practical engineering. Because the rub-impact severely induces the rotor dynamic instability, it will finally result in catastrophic failures and great economic loss if undetected in time. The occurrence of the rub-impact leads to a contact force between rotating shaft and stator which can be regarded as an additional support on the rotor system. The contact force will further result in the stiffening effect. As a result, some fast time-varying phenomena of vibration responses including the fast time-varying transient stiffness and the fast oscillated instantaneous frequency (IF) may appear. These phenomena may offer abundant characteristics to diagnose the rub-impact fault of rotor system. In this paper, an effective method based on the fast oscillated characteristics of IF for vibration responses is proposed to detect rub-impact fault of rotor bearing system. First of all, the fast time-varying transient stiffness of rub-impact rotor system is qualitatively formulated based on the Jeffcott rotor model and the fast oscillated characteristics of IF is presented and theoretically analyzed. Second, a time-frequency technique called nonlinear squeezing time-frequency transform (NSTFT) is introduced to extract the fast oscillated IF resulting from the rub-impact fault of rotor systems. Numerical simulations are respectively conducted on the Jeffcott rotor system with linear stiffness and oil film bearings. And then the oscillated characteristics of the IF are analyzed. The analysis results suggest that the IF of the vibration responses remains constant at the rotating frequency if there is no rub-impact fault. However, if rub-impact fault occurs, the IF of the vibration responses will oscillate periodically around the basic harmonic frequency. Furthermore, the oscillation law of the IF of vibration responses for rub-impact rotor systems is also numerically investigated. It is found that the oscillation frequency is the 1/k (k = 1, 2, 3, ...) of the rotating frequency if the rotor system operates at periodic-k motion. Finally, rub-impact fault experiments are performed under different operating regimes. The experimental results are consistent with the numerical results, thus demonstrating the validity and the practicability of the proposed method.

Mechanism of Fast Time-Varying Vibration for Rotor–Stator Contact System: with Application to Fault Diagnosis

Research on Vibration Response of a Multi-Faulted Rotor System Using LMD-based Time-Frequency Representation

A New Procedure for Extracting Fault Feature of Multi-Frequency Signal from Rotating Machinery

Rub-Impact Detection of Rotor Systems Using Time-Frequency Techniques

Nonlinear Squeezing Time-Frequency Transform and Application in Rotor Rub-Impact Fault Diagnosis

Time-frequency distribution decomposition with application to detection of rotor rub-impact fault

Detection of rub-impact fault for rotor-stator systems: A novel method based on adaptive chirp mode decomposition

Fault Diagnosis of Pump Rotor-Bearing System Based on Frequency Temporal Series Graph under Time-Varying Speed Conditions

Improved High Resolution Estimation Approach for Rotor Fault Diagnosis

Matching Demodulation Transform with Application to Feature Extraction of Rotor Rub-Impact Fault

Structural rotor rub-impact diagnosis under intricate noise interferences based on targeted component extraction and stochastic resonance enhancement

A High-Resolution Time-Frequency Analysis Tool for Fault Diagnosis of Rotating Machinery

Research on Fault Mechanism of Rotor to Stator Rub Nonlinear Vibration in High-Speed Turbo Machinery

Dynamic Characteristics of Rotor System and Rub-Impact Fault Feature Research Based on Casing Acceleration

Application Of Speed Transform To Diagnosis Of Rotating Machinery With Varying Speeds

Theoretical and Experimental Study on the Fault Self-recovering system of High Speed Turbo Machinery

Vibration Health Monitoring of Rolling Bearings under Variable Speed Conditions by Novel Demodulation Technique

An energy track method for early-stage rub-impact fault investigation of rotor system

A Novel Method for Periodical Impulses Detection and Its Applications in Rubbing Fault Diagnosis

Study on the Diagnosis of Rub-Impact Fault Based on Finite Element Method and Envelope Demodulation

Fault Diagnosis of Motor Bearings with Multiple Time-Frequency Extraction Method under Variable Speed Conditions