Abstract:In this study, one of the commonly used MXene (Ti3C2Tx) and β nucleated isotactic polypropylene (β-iPP)/MXene composites of different compositions were fabricated. The effects of MXene on non-isothermal crystallization and polymorphic behavior of β-iPP/MXene composites were comparatively studied. The non-isothermal crystallization kinetics indicates that for all samples, the lower cooling rates promote composites to crystallize at higher temperatures. When MXene and β-Nucleating agent (β-NA) are added separately, the crystallization temperature of composites shifts towards higher temperatures at all cooling rates. When MXene and β-NA are added simultaneously, the composite shows different cooling rate dependence, and the effects of improving crystallization temperatures is more obvious under rapid cooling. The activation energy of four samples iPP, iPP/MXene, iPP/β-NA, and iPP/MXene/β-NA were −167.5, −185.5, −233.8, and −218.1 kJ/mol respectively, which agree with the variation tendency of crystallization temperatures. The polymorphic behavior analysis obtained from Differential Scanning calorimetry (DSC) is affected by two factors: the ability to form β-crystals and the thermal stability of β-crystals. Because β-crystals tend to recrystallize to α-crystals below a critical temperature, to eliminate the effect of β-α recrystallization, the melting curves at end temperatures Tend = 50 °C and Tend = 100 °C are comparatively studied. The results show that more thermally unstable β-crystals would participate in β-α recrystallization with higher cooling rates. Moreover, thermal stability of β-crystals is improved by adding MXene. To further verify these findings, samples of three different thermal conditions were synthesized and analyzed by DSC, X-Ray Diffraction (XRD), and Polarized Light Optical Microscopy (PLOM), and the results were consistent with the above findings. New understandings of synthesizing β-iPP/MXene composites with adjustable morphologies and polymorphic behavior were proposed.

Effect of the β-crystal formation in isotactic polypropylene used for eco-friendly insulating material

Exploring the Effects of MXene on Nonisothermal Crystallization and Melting Behavior of Β-Nucleated Isotactic Polypropylene

Investigation on the Effects of MXene and Β-Nucleating Agent on the Crystallization Behavior of Isotactic Polypropylene

STUDY ON CRYSTALLIZATION BEHAVIOR OF ISOTACTIC POLYPROPYLENE PRODUCED BY SUPERCRITICAL POLYMERIZATION

Influences of Molecular Structure on the Non-Isothermal Crystallization Behavior of Β-Nucleated Isotactic Polypropylene

The Effects Of Crystallization Condition On The Microstructure And Thermal Stability Of Istactic Polypropylene Nucleated By Beta-Form Nucleating Agent

Effect of Β-Crystals on the Mechanical and Electrica Properties of Β-Nucleated Isotactic Polypropylene

Nonisothermal Crystallization, Melting Behaviors, and Mechanical Properties of Isotactic Polypropylene Nucleated with a Liquid Crystalline Polymer

Influence of Crystalline Phase on Conduction Current and Space Charge in Isotactic Polypropylene

In situ synchrotron X-ray scattering studies on the temperature dependence of oriented β-crystal growth in isotactic polypropylene

Dynamic crystallization and melting behavior of β-nucleated isotactic polypropylene with different melt structures

Formation of Β-Crystal from Nonisothermal Crystallization of Compression-Molded Isotactic Polypropylene Melt

Effect Of Beta-Nucleating Agents On Crystallization And Melting Behavior Of Isotactic Polypropylene

Effects of Temperature-Induced Crystalline Phase Transition on the Space Charge Characteristics of Isotactic Polypropylene

Crystalline Modification and Its Effects on Dielectric Breakdown Strength and Space Charge Behavior in Isotactic Polypropylene

Effects of melt structure on crystallization behavior of isotactic polypropylene nucleated with α/β compounded nucleating agents

β-Crystallization of isotactic polypropylene in the presence of β-nucleating agent and different crystallinity poly(ethylene terephthalate)

Effect of isotacticity distribution on the crystallization and melting behavior of polypropylene

Effect of Isotactic Polypropylene on Crystal Structure and Morphology of Β-Modified Random Copolymerized Polypropylene

Influence of compounded α/β-nucleating agents on the crystallization behavior and mechanical properties of isotactic polypropylene

Vibration-induced change of crystal structure in isotactic polypropylene and its improved mechanical properties