First-principles study of decomposition mechanisms of Mg(BH4)2·2NH3 and LiMg(BH4)3·2NH3

Xiaowei Chen,Renquan Li,Guanglin Xia,Hongsheng He,Xiuqing Zhang,Weidong Zou,Xubin Yu

DOI: https://doi.org/10.1039/c7ra05322c

IF: 4.036

2017-01-01

RSC Advances

Abstract:Compared to that of Mg(BH4)2·2NH3, LiMg(BH4)3·2NH3 has a relatively high NH3 diffusion barrier and H2 formation barrier.

What problem does this paper attempt to address?

First-principles study of decomposition mechanisms of Mg(BH4)(2)center dot 2NH(3) and LiMg(BH4)(3)center dot 2NH(3)

Xiaowei Chen,Renquan Li,Guanglin Xia,Hongsheng He,Xiuqing Zhang,Weidong Zou,Xubin Yu

DOI: https://doi.org/10.1039/c7ra05322c

IF: 4.036

2017-01-01

RSC Advances

Abstract:The decomposition mechanisms of Mg(BH4)(2)center dot 2NH(3) and LiMg(BH4)(3)center dot 2NH(3) were studied by using density functional theory calculations. Compared to that of Mg(BH4)(2)center dot 2NH(3) , the incorporation of LiBH4 with the formation of LiMg(BH4)(3)center dot 2NH(3) slightly increased Bader charges of B atoms, meanwhile it decreased Bader charges of N atoms. Mg(BH4)(2)center dot 2NH(3) shows a low ammonia vacancy diffusion barrier, but relatively high ammonia vacancy formation energy, which lead to a low concentration of NH3 vacancies and limit NH3 transportation. In contrast to that of Mg(BH4)(2)center dot 2NH(3), LiMg(BH4)(3)center dot 2NH(3) has a relatively high ammonia vacancy formation energy and diffusion barrier, which suppresses ammonia release. The incorporation of LiBH4 and Mg(BH4)(2)center dot 2NH(3) does not decrease but increases the hydrogen formation barrier of LiMg(BH4)(3)center dot 2NH(3), resulting in a slight increase in the dehydrogenation peak temperature, consistent with experimental results.
Superior Reversible Hydrogen Storage Properties and Mechanism of LiBH4–MgH2–Al Doped with NbF5Additive

Changjun Cheng,Man Chen,Xuezhang Xiao,Xu Huang,Jiaguang Zheng,Lixin Chen

DOI: https://doi.org/10.1021/acs.jpcc.8b00959

2018-01-01

The Journal of Physical Chemistry C

Abstract:LiBH4 is one of the most potential candidates for hydrogen storage materials among several sorts of complex borohydrides. Utilizing reactive hydride composites on LiBH4 could destabilize the thermodynamics and improve dehydrogenation behaviors, such as the excellent reversibility of LiBH4-MgH2 and the fast dehydrogenation of LiBH4-Al. The strategy of combining both outstanding effects of MgH2 and AI to form LiBH4-MgH2-Al system has been proposed. However, reduction of hydrogen capacity during cycles has not been solved for the LiBH4-MgH2-Al system, which is considered as the principal problem. In this work, we investigated the reversible hydrogen storage performance and reaction mechanism of LiBH4-MgH2-Al doped with/without NbF5 additive. It can be found that the dehydrogenation of 4LiBH(4)-MgH2-Al can release about 9.0 wt % H-2 quickly without incubation period, compared with 2LiBH(4)-MgH2. Moreover, it is the first time to achieve completely reversible hydrogen desorption property of LiBH4-MgH2-Al by doping with NbF5 and dehydrogenating under hydrogen back pressure in experiment. Microstructure analysis shows that the formation of Mg-Al alloys could result in the formation of Li2B12H12 and subsequently lead to the capacity degradation. With the additive NbF5, it shows a totally different pathway and a significant inhibition effect on the alloying between Mg and Al, leading to an improved de/rehydrogenation behavior without the byproduct Li2B12H12. Meanwhile, NbF5 could be hydrogenated into NbH2 and react with element B to form NbB2, promoting the reaction between Mg/Al metals and B element to form MgAlB4. On the other hand, those niobium compounds could facilitate the products MgAlB4 and LiH to be fully rehydrogenated into LiBH4, MgH2, and Al, which contributes to the complete reversibility of LiBH4-MgH2-Al. A better understanding of the capacity fade mechanism of LiBH4-MgH2-Al system and the effects of additives might promote further development of high-capacity hydrogen storage materials.
An Ammonia-Stabilized Mixed-Cation Borohydride: Synthesis, Structure And Thermal Decomposition Behavior

Yanjing Yang,Yongfeng Liu,Hui Wu,Wei Zhou,Mingxia Gao,Hongge Pan

DOI: https://doi.org/10.1039/c3cp54099e

IF: 3.3

2014-01-01

Physical Chemistry Chemical Physics

Abstract:We demonstrate the synthesis, crystal structure and thermal decomposition behavior of a novel ammonia-stabilized mixed-cation borohydride where the NH3 groups enable the coexistence of Li and Mg cations as an "assistant". Li2Mg(BH4)(4)center dot 6NH(3), which is comprised of orderly arranged Mg[NH3](6)(2+) ammine complexes and Li-2[BH4](4)(2-) complex anions, was synthesized by the mechanochemical reaction between Mg(BH4)(2)center dot 6NH(3) and LiBH4. This novel compound crystallizes in a tetragonal P4(3)2(1)2 (No. 96) structure with lattice parameters a = b = 10.7656(8) angstrom and c = 13.843(1) angstrom with very short dihydrogen bonds, which determine a very low onset temperature of 80 degrees C for hydrogen release and are also responsible for the nucleation of Li2Mg(BH4)(4)center dot 3NH(3) as a decomposition intermediate. Mechanistic investigations on the thermal decomposition showed that the H delta+-H delta- combination in the ammoniastabilized mixed-cation borohydride was significantly enhanced due to the strengthened Mg-N bonds. Upon heating, 11.02 moles of H-2 (equivalent to 11.1 wt%) and 3.07 moles of NH3 are evolved from one mole of Li2Mg(BH4)(4)center dot 6NH(3) with a three-step reaction. The insights into the formation mechanism of ammonia-stabilized mixed-cation borohydride and the role played by NH3 group are very useful as a guideline for the design and synthesis of novel B-N-based materials with high hydrogen content.
A Combined Hydrogen Storage System of Mg(BH4)2−LiNH2 with Favorable Dehydrogenation

Shi Xue Dou,Zaiping Guo,Hua-Kun Liu,Abbas Ranjbar,Xuebin Yu,Zunxian Yang,Dalin Sun,Yanhui Guo

DOI: https://doi.org/10.1021/jp910547s

2010-01-01

Abstract:The decomposition properties of Mg(BH4)2−LiNH2 mixtures were investigated. Apparent NH3 release appeared from 50 to 300 °C for the Mg(BH4)2−LiNH2 mixtures with mole ratios of 1:1.5, 1:2, and 1:3, while only hydrogen release was detected for the mixture with a mole ratio of 1:1. In the case of the Mg(BH4)2−LiNH2 (1:1) sample, the onset of the first-step dehydrogenation starts at 160 °C, with a weight loss of 7.2 wt % at ∼300 °C, which is improved significantly compared to the pure Mg(BH4)2 alone. From Kissinger’s method, the activation energy, Ea, for the first and second step dehydrogenation in Mg(BH4)2−LiNH2 (1:1) was estimated to be about 121.7 and 236.6 kJ mol−1, respectively. The improved dehydrogenation in the combined system may be ascribed to a combination reaction between [BH4] and [NH2], resulting in the formation of Li−Mg alloy and amorphous B−N compound.
Formation Mechanism of MgB2 in 2libh4 + MgH2 System for Reversible Hydrogen Storage

Kou Hua-qin,Xiao Xue-zhang,Chen Li-xin,Li Shou-quan,Wang Qi-dong

DOI: https://doi.org/10.1016/s1003-6326(11)60819-4

2011-01-01

Abstract:The formation conditions of MgB2 in 2LiBH4 + MgH2 system during dehydrogenation were investigated and its mechanism was discussed. The results show that direct decomposition of LiBH4 is suppressed under relative higher initial dehydrogenation pressure of 4.0×105 Pa, wherein LiBH4 reacts with Mg to yield MgB2, and 9.16% (mass fraction) hydrogen is released within 9.6 h at 450 °C. However, under relatively lower initial dehydrogenation pressure of 1.0×102 Pa, LiBH4 decomposes independently instead of reacting with Mg, resulting in no formation of MgB2, and 7.91% hydrogen is desorbed within 5.2 h at 450 °C. It is found that the dehydrogenation of 2LiBH4 + MgH2 system proceeds more completely and more hydrogen desorption amount can be obtained within a definite time by forming MgB2. Furthermore, it is proposed that the formation process of MgB2 includes incubation period and nucleus growth process. Experimental results show that the formation process of MgB2, especially the incubation period, is promoted by increasing initial dehydrogenation pressure at constant temperature, and the incubation period is also influenced greatly by dehydrogenation temperature.
A Combined Hydrogen Storage System of Mg(BH4)2−LiNH2with Favorable Dehydrogenation

X. B. Yu,Y. H. Guo,D. L. Sun,Z. X. Yang,A. Ranjbar,Z. P. Guo,H. K. Liu,S. X. Dou

DOI: https://doi.org/10.1021/jp910547s

2010-01-01

Abstract:The decomposition properties of Mg(BH4)2−LiNH2 mixtures were investigated. Apparent NH3 release appeared from 50 to 300 °C for the Mg(BH4)2−LiNH2 mixtures with mole ratios of 1:1.5, 1:2, and 1:3, while only hydrogen release was detected for the mixture with a mole ratio of 1:1. In the case of the Mg(BH4)2−LiNH2 (1:1) sample, the onset of the first-step dehydrogenation starts at 160 °C, with a weight loss of 7.2 wt % at ∼300 °C, which is improved significantly compared to the pure Mg(BH4)2 alone. From Kissinger’s method, the activation energy, Ea, for the first and second step dehydrogenation in Mg(BH4)2−LiNH2 (1:1) was estimated to be about 121.7 and 236.6 kJ mol−1, respectively. The improved dehydrogenation in the combined system may be ascribed to a combination reaction between [BH4] and [NH2], resulting in the formation of Li−Mg alloy and amorphous B−N compound.
Theoretical Studies on Dehydrogenation Reactions in Mg2（BH4）2（NH2）2 Compounds

Zheng Chen,Zhe-ning Chen,An-an Wu,Guo-tao Wu,Zhi-tao Xiong,Ping Chen,Xin Xu

DOI: https://doi.org/10.1088/1674-0068/25/06/676-680

IF: 1.09

2012-01-01

Chinese Journal of Chemical Physics

Abstract:Borohydrides have been recently hightlighted as prospective new materials due to their high gravimetric capacities for hydrogen storage. It is, therefore, important to understand the underlying dehydrogenation mechanisms for further development of these materials. We present a systematic theoretical investigation on the dehydrogenation mechanisms of the Mg2(BH4)2(NH2)2 compounds. We found that dehydrogenation takes place most likely via the intermolecular process, which is favorable both kinetically and thermodynamically in comparison with that of the intramolecular process. The dehydrogenation of Mg2(BH4)2(NH2)2 initially takes place via the direct combination of the hydridic H in BH4− and the protic H in NH2−, followed by the formation of Mg—H and subsequent ionic recombination of Mg—Hδ− ··· Hδ+−N.
Synthesis and Thermal Decomposition Properties of a Novel Dual-Cation/anion Complex Hydride Li2Mg(BH4)2(NH2)2

Yongfeng Liu,Ni Jian,Zhuanghe Ren,Jianjiang Hu,Fang Du,Mingxia Gao,Hongge Pan

DOI: https://doi.org/10.1016/j.ijhydene.2017.11.104

IF: 7.2

2017-01-01

International Journal of Hydrogen Energy

Abstract:A novel dual-cation/anion complex hydride (Li2Mg(BH4)(2)(NH2)(2)), which contains a theoretical hydrogen capacity of 12.1 wt%, is successfully synthesized for the first time by ball milling a mixture consisting of MgBH4NH2 and Li2BH4NH2. The prepared Li2Mg(BH4)(2)(NH2)(2) crystallizes in a triclinic structure, and the [NH2] and [BH4] groups remain intact within the structure. Upon heating, the prepared Li2Mg(BH4)2(()NH(2))(2) decomposes to release approximately 8.7 wt% hydrogen in a three-step reaction at 100-450 degrees C. In addition, a small amount of ammonia is evolved during the first and second thermal decomposition steps as a side product. This ammonia is responsible for the lower experimental dehydrogenation amount compared to the theoretical hydrogen capacity. The XRD and FTIR results reveal that Li2Mg(BH4)(2)(NH2)(2) first decomposes to LiMgBN2, LiBH4, BN, LiH and MgBNH8 at 100 250 degrees C, and then, the newly formed MgBNH8 reacts with LiH to form Mg, LiBH4 and BN at 250-340 degrees C. Finally, the decomposition of LiBH4 releases hydrogen and generates LiH and B at 340-450 degrees C. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Enhanced reversible hydrogen desorption properties and mechanism of Mg(BH 4 ) 2 -AlH 3 -LiH composite

Jiaguang Zheng,Xuezhang Xiao,Yan He,Man Chen,Meijia Liu,Shouquan Li,Lixin Chen

DOI: https://doi.org/10.1016/j.jallcom.2018.05.267

IF: 6.2

2018-01-01

Journal of Alloys and Compounds

Abstract:The Mg(BH4)2-AlH3-xLiH (x = 0, 0.5, 1) novel ternary composites have been synthesized through mechanical ball milling, their favorable dehydrogenation properties and mechanism have been experimentally investigated. It can be found that during ball milling, a slight amount of Mg(BH4)2 would react with LiH and transform into LiBH4, while most Mg(BH4)2 remained stable after ball milling. Two major dehydrogenation steps can be detected in the Mg(BH4)2-AlH3-xLiH composite, which belong to the decomposition of AlH3 and Mg(BH4)2, respectively. Remarkably, the onset hydrogen desorption temperature of Mg(BH4)2-AlH3-xLiH composite can be reduced to 125.9 °C, with a total hydrogen desorption capacity of 10.3 wt%. It is worth emphasizing that the reversible dehydrogenation capacity is obviously improved to 3.8 wt%, compared to the Mg(BH4)2-AlH3 composite. This reversible capacity can be held for 3 cycles without obvious degeneration. Microstructural analysis on de/rehydrogenated composite has identified the regeneration of [BH4]- in Mg(BH4)2-AlH3-0.5LiH composite and revealed the role of LiH in the cycling hydrogen desorption and absorption processes. The formation of LiBH4 and MgH2 resulted from the rehydrogenation between MgAlB4 and LiH could be helpful for the stability of reversible hydrogen storage performance.
Electronic structure and initial dehydrogenation mechanism of M(BH 4) 2·2NH 3 (M = Mg, Ca, and Zn): A first-principles investigation

Xiaowei Chen,Xuebin Yu

DOI: https://doi.org/10.1021/jp301986k

2012-01-01

Abstract:The electronic structure and initial dehydrogenation mechanism of M(BH4)(2)center dot 2NH(3) (M = Mg, Ca, and Zn) have been systematically studied using first-principles calculations. A detailed study of the electronic structure reveals that the metal cations in M(BH4)(2)center dot 2NH(3) play a crucial role in both suppressing ammonia emission and destabilizing the N-H/B-H bonds. The calculation results of hydrogen removal energies are in agreement with the tendency of dehydrogenation temperatures of these ammoniates, i.e., Zn(BH4)(2)center dot 2NH(3) < Mg(BH4)(2)center dot 2NH(3) < Ca(BH4)(2)center dot 2NH(3). The initial dehydrogenation of M(BH4)(2)center dot 2NH(3) is achieved by the dissociation of (N)H delta+ from NH3 and (B)H delta- atoms from BH4 groups, resulting in the formation of N-B dative bonds and the reduction of the neighboring (N)H delta+center dot center dot center dot(B)H delta- dihydrogen bonds, which accelerate the subsequent dehydrogenation.
A Comparison Study of Decomposition Mechanisms of Single-Cation and Double-Cations (li, Al) Ammine Borohydrides

Xiaowei Chen,Renquan Li,Guanglin Xia,Hongsheng He,Weidong Zou,Xuebin Yu

DOI: https://doi.org/10.1016/j.ijhydene.2017.08.100

IF: 7.2

2017-01-01

International Journal of Hydrogen Energy

Abstract:The decomposition mechanisms of [Li(NH3)][BH4], [Al(NH3)(6)][BH4](3) and [Al(NH3)(6)][Li-2(BH4)(5)] were investigated using Density functional theory (DFT) calculation. The calculated results show that [Li(NH3)][BH4] has low NH3 vacancy formation energy and diffusion barrier, therefore ammonia would easily release at relatively low temperature. Both [Al(NH3)(6)] [BH4](3) and [Al(NH3)(6)]P-2(BH4)(3)] show relatively high NH3 vacancy formation energies and diffusion barriers, which avoid ammonia release at low temperature. In addition, the calculated H-2 formation energy barriers, i.e., [Al(NH3)(6)][Li-2(BH4)(5)] < [Al(NH3)(6)] [BH4](3) < [Li(NH3)][BH4], are in agreement with the tendency of dehydrogenation temperatures determined experimentally. The incorporation of [BH4](-) into [Al(NH3)(6)][BH4](3) play an important role in decreasing the dehydrogenation temperature and improving the hydrogen purity of [Al(NH3)(6)][Li-2(BH4](5)]. (C) 2017 Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC.
Enhanced low temperature hydrogen desorption properties and mechanism of Mg(BH4)2 composited with 2D MXene

Jiaguang Zheng,Hao Cheng,Xuezhang Xiao,Man Chen,Lixin Chen

DOI: https://doi.org/10.1016/j.ijhydene.2019.07.177

IF: 7.2

2019-01-01

International Journal of Hydrogen Energy

Abstract:Mg(BH4)2 occupies a large hydrogen storage capacity of 14.7 wt%, and has been widely recognized to be one of the potential candidates for hydrogen storage. In this work, 2D MXene Ti3C2 was introduced into Mg(BH4)2 by a facile ball-milling method in order to improve its dehydrogenation properties. After milling with Ti3C2, Mg(BH4)2–Ti3C2 composites exhibit a novel “layered cake” structure. Mg(BH4)2 with greatly reduced particle sizes are found to disperse uniformly on Ti3C2 layered structure. The initial dehydrogenation temperature of Mg(BH4)2 has been decreased to 124.6 °C with Ti3C2 additive and the hydrogen liberation process can be fully accomplished below 400 °C. Besides, more than 10.8 wt% H2 is able to be liberated from Mg(BH4)2–40Ti3C2 composite at 330 °C within 15 min, while pristine Mg(BH4)2 merely releases 5.3 wt% hydrogen. Moreover, the improved dehydrogenation kinetics can be retained during the subsequent second and third cycles. Detailed investigations reveal that not only Ti3C2 keeps Mg(BH4)2 particles from aggregation during de/rehydrogenation, but also the metallic Ti formed in-situ serves as the active sites to catalyze the decomposition of Mg(BH4)2 by destabilizing the B–H covalent bonds. This synergistic effect of size reduction and catalysis actually contributes to the greatly advanced hydrogen storage characteristics of Mg(BH4)2.
Study on the Dehydrogenation Properties and Reversibility of Mg(Bh4)(2)-Alh3 Composite under Moderate Conditions

Jiaguang Zheng,Xuezhang Xiao,Liuting Zhang,Yan He,Shouquan Li,Hongwei Ge,Lixin Chen

DOI: https://doi.org/10.1016/j.ijhydene.2016.12.045

IF: 7.2

2017-01-01

International Journal of Hydrogen Energy

Abstract:Mg(BH4)(2) has been considered as one of the promising light metal complex hydrides due to its high hydrogen capacity and low cost. But its higher thermal stability (dehydrogenation at above 300 degrees C) needs to be improved for the practical application. In this study, the aluminum hydride AlH3 was introduced into complex borohydride Mg(BH4)(2) to synthesize a new Mg(BH4)(2)-AlH3 composite by ball milling method. It is found that the active Al* formed from the self-decomposition of AlH3 can effectively improve the dehydrogenation properties of Mg(BH4)(2), the Mg(BH4)(2) AlH3 composite starts to release hydrogen at 130.8 degrees C with a total hydrogen capacity of 11.9 wt.%. The dehydrogenated products of the composite is composed of Mg2Al3 and B at 350 degrees C, resulting in the improved hydrogen desorption properties of Mg(BH4)(2) AlH3 composite. The Mg2Al3 and B products would be further transformed into MgAlB4 and Al at 500 degrees C. Moreover, the Mg2Al3 and B dehydrogenated products show better reversible hydrogen storage property than that of the MgAlB4 and Al products. This research shows a way to alter hydrogen de/hydrogenation route and reversibility of Mg(BH4)(2) complex hydride by compositing with AlH3 and controlling the dehydrogenation temperature. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Crystal Structures, Phase Stability, and Decomposition Reactions in the Quaternary Mg-B-N-H Hydrogen Storage System

Yongsheng Zhang,David Farrell,Jun Yang,Andrea Sudik,C. Wolverton

DOI: https://doi.org/10.1021/jp500318e

2014-01-01

Abstract:Using the combination of DFT-based computational approaches and experimental measurements, we have studied the crystal structure, phase stability, and decomposition products of mixed Mg(NH2)(2)/Mg(BH4)(2) materials. We find the following: (i) DFT crystal structure prediction calculations (0 K) show the existence of a mixed Mg(NH2)(2)/Mg(BH4)(2) phase, which is thermodynamically stable relative to its separated phases [Mg(NH2)(2) and Mg(BH4)(2)]. (ii) The DFT calculated phonon density of states of Mg(NH2)(BH4) is in good agreement with the peak positions from experimental PAS IR measurements (at the room temperature) of a ball-milled Mg(NH2)(2)/Mg(BH4)(2) mixture, suggesting the mixture is not merely a physical mixture of the individual compounds. (iii) The experimentally measured dehydrogenation temperature of the mixed Mg(NH2)(2)/Mg(BH4)(2) phase is lower than that of Mg(NH2)(2) or Mg(BH4)(2), which further confirms that it is not a simply physical mixture of Mg(NH2)(2) and Mg(BH4)(2). The observed amount of H-2 release is 3.4 wt % at 250 degrees and 8.3 wt % above 280 degrees. (iv) From a combination of DFT, the grand-canonical linear programming (GCLP) method calculations, and PAS IR measurements of dehydrogenated samples, we identify the existence of the B H bonds and linear N-B-N units in the decomposition of Mg(NH2)(2)/Mg(BH4)(2). (v) Experimental desorption measurements reveal that the Mg(NH2)(2)/Mg(BH4)(2) mixed phase is irreversible, consistent with DFT calculated enthalpies in the range of -18 to +16 kJ(mol H-2), too low for near-ambient reversible storage.
Electronic Structure and Decomposition Pathways of Monoammoniate of Lithium Borohydride Li(Nh3)Bh4: A First-Principles Investigation

B. Zhong,X. X. Huang,G. Wen,X. D. Zhang,H. W. Bai,T. Zhang,H. M. Yu

DOI: https://doi.org/10.1016/j.ssc.2010.06.002

IF: 1.934

2010-01-01

Solid State Communications

Abstract:The monoammoniate of lithium borohydride (Li(NH3)BH4) is a potential candidate for hydrogen storage owing to its high hydrogen capacity (18 wt%). In this work, electronic structure, bonding characters, and decomposition pathways of Li(NH3)BH4 are investigated from first-principles calculations. We find that NH3 molecules are covalently attached to Li atoms through N atoms and the ionization of Li atoms plays an essential role in stabilizing the compound. A general correlation between the stability of X(NH3)BH4 (X = H, Li, Na, K) and the electronegativities of X atoms is established. The thermal stability of X(NH3)BH4 could be modulated by manipulating the cation electronegativities. Free energy computations indicate that Li(NH3)BH4 -> LiBH4 + NH3 is the most likely thermal decomposition route. (C) 2010 Elsevier Ltd. All rights reserved.
Heating Rate-Dependent Dehydrogenation in the Thermal Decomposition Process of Mg(BH4)2·6NH3

Yanjing Yang,Yongfeng Liu,You Li,Mingxia Gao,Hongge Pan

DOI: https://doi.org/10.1021/jp404424m

2013-01-01

Abstract:The detailed mechanism of thermal decomposition of Mg(BH4)(2)center dot 6NH(3) synthesized via a mechanochemical reaction between Mg(BH4)(2) and NH3 at room temperature was investigated for the first time. A six-step decomposition process, which involves several parallel and interrelated reactions, was elucidated through a series of structural examinations and property evaluations. First, the thermal decomposition of Mg(BH4)(2)center dot 6NH(3) evolves 3 equiv of NH3 and forms Mg(BH4)(2)center dot 3NH(3). Subsequently, Mg(BH4)(2)center dot 3NH(3) decomposes to release an additional 1 equiv of NH3 and 3 equiv of H-2 to produce the [MgNBHNH3] [BH4] polymer. And then, [MgNBHNH3] [BH4] further desorbs 3 equiv of H-2 through a three-step reaction to give rise to the formation of the polymer intermediates of [MgNBHNH2][BH4], MgNBHNH2BH2, and MgNBNHBH, respectively. Finally, an additional 1 equiv of H-2 is liberated from MgNBNHBH to yield Mg and BN as the resultant solid products. In total, about 7 equiv of H-2 and 4 equiv of NH3 are released together from Mg(BH4)(2)center dot 6NH(3) upon heating. Moreover, there is a strong dependence of the gas compositions released from Mg(BH4)(2)center dot 6NH(3) on the heating rate because the decomposition reaction of Mg(BH4)(2)center dot 3NH(3) is sensitive to the heating rate, as the faster heating rate induces a lower ammonia evolution. The finding in this work provides us with insights into the dehydrogenation mechanisms of the metal borohydride ammoniates as hydrogen storage media.
Decomposition Pathway of Mg(BH4)2 under Pressure: Metastable Phases and Thermodynamic Parameters

Junzhi Yang,Xuanzhou Zhang,Jie Zheng,Ping Song,Xingguo Li

DOI: https://doi.org/10.1016/j.scriptamat.2010.10.019

IF: 6.302

2011-01-01

Scripta Materialia

Abstract:The conditions of formation of polyborane intermediate species of Mg(BH4)(2) during the partial dehydriding reaction and their properties have been experimentally investigated. A six step thermal decomposition pathway is first proposed. Hydrogen capacity, reaction enthalpy and activation energy values of each step are calculated to discuss the thermodynamically determined decomposition temperature and the kinetic barriers. In addition, a metastable MgB2H6 phase, which was previously predicted from density functional theory calculations, is confirmed by pressure-content isotherm measurements carried out at 277 C. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
The decomposition pathways for LiBD4–MgD2 multicomponent systems investigated by in situ neutron diffraction

T.E.C. Price,D.M. Grant,I. Telepeni,X.B. Yu,G.S. Walker

DOI: https://doi.org/10.1016/j.jallcom.2008.05.030

IF: 6.2

2009-01-01

Journal of Alloys and Compounds

Abstract:Complex hydride-binary hydride multicomponent hydrogen storage systems offer great potential for practical hydrogen stores because their dehydrogenation thermodynamics can be tailored through a destabilisation mechanism whilst maintaining a high hydrogen storage capacity. One promising system is based on lithium tetra hydridoborate and magnesium hydride which in a 0.3:1 molar ratio has a storage capacity of 9.8 wt.%. In situ neutron diffraction of the LiBD4-MgD2 in a 0.3:1 molar ratio was performed on samples under both a dynamic vacuum and under a self-generated deuterium atmosphere to elucidate the reaction pathway under each condition. Under vacuum the decomposition occurred in three steps: firstly the MgD2 started to decompose forming Mg at 300 degrees C, secondly the Mg catalysed decomposition of LiBD4 starting at the relatively low temperature of 350 degrees C, forming LiD which subsequently reacted with the Mg to form the alloys Mg0.70Li0.30 and Mg0.816Li0.184 in step 3. Under a self-generated deuterium atmosphere the MgD2 decomposed in a similar manner, evolving a pressure in excess of 30 bar, the rate of decomposition was limited by the equilibrium pressure of the system, which itself was dependent on the increasing temperature; hence MgD2 decomposition occurred over a larger temperature range. The evolved deuterium pressure was greater than the equilibrium pressure of LiBD4 at experimental temperatures (ca. 730 degrees C) thereby preventing decomposition without destabilisation. Only on heating past the melting point of magnesium (650 degrees C) and subsequent cooling and re-crystallisation was any LiD observed. This suggests that the destabilisation decomposition mechanism became the predominant reaction in the molten phase. We postulate that under controllable pressure regimes below the plateau pressure the MgD2 would destabilise the LiBD4 and offer a reversible high capacity storage material with two different cycling routes depending on the partial pressure of deuterium. (C) 2008 Elsevier B.V. All rights reserved.
The Comparison in Dehydrogenation Properties and Mechanism between MgCl2(NH3)/LiBH4and MgCl2(NH3)/NaBH4Systems

lin gao,Y. H. Guo,qing li,X. B. Yu

DOI: https://doi.org/10.1021/jp103012t

2010-01-01

Abstract:The dehydrogenation properties and mechanism of MgCl2(NH3)/MBH4 (here, M is Li or Na) were investigated by thermogravimetric analysis and mass spectrometry, X-ray diffraction (XRD), solid-state B-11 NMR, Fourier transform infrared, and differential scanning calorimetry (DSC). As for the MgCh(NH3)center dot LiBH4 system, it was found that a new phase, namely, MgCl2(NH3)center dot LiBH4, to which the following dehydrogenation relates, is formed after ball milling. Judging from the reaction products, it is confirmed that MgCl2 is inclined to work as an ammonia carrier, and the ligand NH3, transferring from MgCl2, is able to combine with the LiBH4 to release H-2 with a trace of ammonia at ca. 240 degrees C. With the increase of LiBH4 content in the mixture, the emission of ammonia was totally suppressed, and Mg(BH4)(2) was produced by the decomposition reaction of MgCl-, with the excessive LiBH4 after the ligand NH3 was exhausted, resulting in an improved dehydrogenation in the whole system. As for the MgCl2(NH3)/NaBH4 system, no new phases are detected by XRD after ball milling. The MgCl2 works as a KV acceptor, and the ligand NH3 stays with Mg2+ to combine with the BH4- which transfers from NaBH4 to Mg2+, resulting in a totally different decomposition route and thermal effects as compared with the MgCl2(NH3)/LiBH4 system. DSC results revealed that the decomposition of MgCl2(NH3)/LiBH4 presented an exothermic reaction with an enthalpy of 3.8 kJ mol(-1) H-2, while the MgCl2(NH3)/NaBH4 showed two apparent endothermic peaks associated with its two-step dehydrogenation with enthalpies of 8.6 and 2.2 kJ mol(-1) H-2, respectively. Moreover, the MS profiles of the MgCl2(NH3)/ 2NaBH4, with excessive BH4-, still released a trace of NH3, indicating that the NaBH4 is not so effective in suppressing the emission of NH3 as LiBH4 did.
Thermal Dehydrogenation Behaviors and Mechanisms of Mg(BH4)2∙6NH3-xLiH Combination Systems

You Li,Yongfeng Liu,Yanjing Yang,Mingxia Gao,Hongge Pan

DOI: https://doi.org/10.1016/j.ijhydene.2014.05.191

IF: 7.2

2014-01-01

International Journal of Hydrogen Energy

Abstract:A reactive composite of Mg(BH4)(2)center dot 6NH(3)-xLiH is prepared, and the effects of the LiH content on the dehydrogenation/hydrogenation properties of the material are investigated. The results show that the presence of LiH with x = 3 reduces the onset dehydrogenation temperature of Mg(BH4)(2)center dot 6NH(3) from 130 degrees C to 80 degrees C in TPD mode. Approximately 14.3 wt% hydrogen is released from the Mg(BH4)(2)center dot 6NH(3)-6LiH composite with distinctly reduced ammonia evolution while heating to 340 degrees C. Upon heating, Mg(BH4)(2)center dot 6NH(3) first reacts with LiH to form Mg(NH2)(2), Li3BN2H8 and LiBH4 with the release of H-2 and the evolution of a minor amount of NH3. The newly formed Mg(NH2)(2) then reacts with LiH to produce H-2 and Li2Mg(NH)(2). Further elevating the operating temperature induces chemical reactions between Li2Mg(NH)(2), LiBH4 and Li3BN2H8, causing the release of additional H-2 and production of Li3BN2, LiMgBN2 and LiH. The dehydrogenated sample at 210 degrees C absorbs 2.2 wt% of hydrogen, exhibiting partial reversibility for hydrogen storage. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

First-principles study of decomposition mechanisms of Mg(BH<sub>4</sub>)<sub>2</sub>·2NH<sub>3</sub> and LiMg(BH<sub>4</sub>)<sub>3</sub>·2NH<sub>3</sub>

First-principles study of decomposition mechanisms of Mg(BH4)(2)center dot 2NH(3) and LiMg(BH4)(3)center dot 2NH(3)

Superior Reversible Hydrogen Storage Properties and Mechanism of LiBH4–MgH2–Al Doped with NbF5Additive

An Ammonia-Stabilized Mixed-Cation Borohydride: Synthesis, Structure And Thermal Decomposition Behavior

A Combined Hydrogen Storage System of Mg(BH4)2−LiNH2 with Favorable Dehydrogenation

Formation Mechanism of MgB2 in 2libh4 + MgH2 System for Reversible Hydrogen Storage

A Combined Hydrogen Storage System of Mg(BH4)2−LiNH2with Favorable Dehydrogenation

Theoretical Studies on Dehydrogenation Reactions in Mg2（BH4）2（NH2）2 Compounds

Synthesis and Thermal Decomposition Properties of a Novel Dual-Cation/anion Complex Hydride Li2Mg(BH4)2(NH2)2

Enhanced reversible hydrogen desorption properties and mechanism of Mg(BH 4 ) 2 -AlH 3 -LiH composite

Electronic structure and initial dehydrogenation mechanism of M(BH 4) 2·2NH 3 (M = Mg, Ca, and Zn): A first-principles investigation

A Comparison Study of Decomposition Mechanisms of Single-Cation and Double-Cations (li, Al) Ammine Borohydrides

Enhanced low temperature hydrogen desorption properties and mechanism of Mg(BH4)2 composited with 2D MXene

Study on the Dehydrogenation Properties and Reversibility of Mg(Bh4)(2)-Alh3 Composite under Moderate Conditions

Crystal Structures, Phase Stability, and Decomposition Reactions in the Quaternary Mg-B-N-H Hydrogen Storage System

Electronic Structure and Decomposition Pathways of Monoammoniate of Lithium Borohydride Li(Nh3)Bh4: A First-Principles Investigation

Heating Rate-Dependent Dehydrogenation in the Thermal Decomposition Process of Mg(BH4)2·6NH3

Decomposition Pathway of Mg(BH4)2 under Pressure: Metastable Phases and Thermodynamic Parameters

The decomposition pathways for LiBD4–MgD2 multicomponent systems investigated by in situ neutron diffraction

The Comparison in Dehydrogenation Properties and Mechanism between MgCl<sub>2</sub>(NH<sub>3</sub>)/LiBH<sub>4</sub>and MgCl<sub>2</sub>(NH<sub>3</sub>)/NaBH<sub>4</sub>Systems

Thermal Dehydrogenation Behaviors and Mechanisms of Mg(BH4)2∙6NH3-xLiH Combination Systems