Abstract:The ancient white bricks in the Yichun region occupy a special place in Chinese cultural heritage. In order to study the material properties of these unique bricks, a series of experimental studies were conducted, including measurement of density, compressive strength, thermal conductivity, chemical composition, phase composition, pore structure, micro morphology, and firing temperature. These material properties were tested and analyzed using a variety of methods including X-ray fluorescence (XRF) spectrometry, X-ray diffraction (XRD), scanning electron microscopy (SEM), mercury injection test, thermal expansion test, etc. The material properties of the ancient white bricks were also compared with the material properties of the traditional red bricks and of the traditional blue bricks. The results reveal that while the thermal conductivity of the ancient white bricks is lower than that of the traditional red bricks and of the traditional blue bricks, the ancient white bricks’ density is actually slightly higher than that of the traditional red bricks and of the traditional blue bricks. An additional finding is that whereas the compressive strength of the white bricks from the ancient city walls is higher than that of the traditional red bricks and of the traditional blue bricks, the compressive strength of the white bricks from the traditional residential walls is similar to that of the traditional red bricks and of the traditional blue bricks. The main components of these two types of ancient white bricks are basically consistent with the constituents of the natural clay originating in the Yichun region, such as Al-Mg compounds and silicide, furthermore the proportion of each of these main elements is also similar. The phases of these two types of ancient white bricks are mainly composed of γ-Fe2O3, FeCO3, FeS, enstatite, gaylussite, talc, calcite, quartz, and corundum. The pore size of the two types of ancient white bricks is mainly concentrated in the interval between 0.1 μm and 1 μm, which is similar to the traditional blue bricks’, but is smaller than the traditional red bricks’. The firing temperature of the white bricks from the ancient city walls is between 650°C and 700°C, and the firing temperature of the white bricks from the traditional residential walls is approximately 600°C. These results can provide the basis for the excavation of traditional techniques and a scientific conservation strategy for the ancient Chinese white bricks.

Characterization of the Superficial Weathering of Bricks on the City Wall of Xi'An, China

Characterization of Historical Mortar from Ancient City Walls of Xindeng in Fuyang, China

EVALUATION OF THE ORGANOSILICON MATERIALS FOR ANCIENT GREY BRICKS PRESERVATION

Material characterization of the brick in the Ming Dynasty heritage wall of Pianguan County: A case study

Characteristics and weathering mechanisms of the traditional Chinese blue brick from the ancient city of Ping Yao

Study on Deterioration Law and Mechanism of Gray Brick Due to Salt Crystallization

An exploratory study of the deterioration mechanism of ancient wall-paintings based on thermal and moisture expansion property analysis

Biological Solutions for the Remediation of Cracks in Ancient Earthen Structures: Experimental Studies

Experimental Research on Material Properties of Ancient White Bricks in the Yichun Region, China

Meso-scale Mechanical Deterioration of Mortar Due to Sodium Chloride Attack

Characteristics and Mechanism of Salt Weathering in Moist Earthen Sites: A Case Study on China's Jinsha Earthen Site

Characterization and Origin of Weathering Crusts on Kylin Carved-Stone, Kylin Countryside, Nanjing – A Case Study

Study on the Characterization of Differential Weathering Feature Based on Surface Roughness Theory and 3D Laser Scanning: A Case Study of the Suoyang Ancient City

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Investigation and Analysis of Ancient Brick Carvings of the Liuhe Pagoda in Hangzhou

The Effect of SH-lime Composite Material on Capillary Water Rise Resistance in the Great Wall

EXPERIMENTAL INVESTIGATION ON CONCRETE PERFORATED BRICK WALL SHINKAGE AT DIFFERENT AGES

Meso-Scale Mechanical Deterioration Of Mortar Subjected To Freeze Thaw Cycles And Sodium Chloride Attack

Surface flaking mechanism of stone components of ancient building complex in Wudang Mountain, China

Erosion of Aerial Lime and Sticky Rice Mortars by Cyclic Wetting–drying and Dilute Sulfate Acid Actions

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete