Abstract:Beta-type titanium alloys are excellent candidates for biomedical applications because of their very low elastic modulus, excellent corrosion resistance, and biocompatibility. However, many traditional β-type titanium alloys exhibit low yield strength. In this study, a small amount of Si (3 and 5 at.%) was added to a Ti-35Nb-7Zr-5Ta (wt%, TNZT) biomedical alloy prepared via laser powder bed fusion (LPBF) to increase its yield strength. The Si addition resulted in a significant increase in the compression yield strength of the alloy (from 802 to 1282 MPa). Meanwhile, the elastic moduli of the TNZT alloys (48.7-60.6 GPa) with 3 and 5 at.% Si were much lower than that of the Ti-6Al-4 V alloy (110 GPa), which is used extensively in clinical applications. The microstructural analyses indicated that the ultrahigh-strength of the TNZT alloy containing Si was due to the presence of ultrafine (Ti, Nb, Zr)5Si3 (S1) grains in the β-Ti matrix. In addition, thin shell-shaped S1 and (Ti, Nb, Zr)2Si (S2) grains precipitated along the columnar β-Ti grain boundaries in the TNZT alloys containing 3 and 5 at.% Si, respectively. Moreover, the introduction of Si to the TNZT alloy significantly refined the grains, weakened the cubic texture, decreased surface roughness, and improved Vickers hardness. The ultrahigh strength of the Si-containing TNZT alloys was due to grain boundary strengthening and precipitation strengthening. In addition, in vitro studies with MC3T3-E1 cells revealed that the cytocompatibilities of the LPBF-fabricated TNZT and Si-containing TNZT alloys were equivalent and were better than that of the LPBF-fabricated Ti-6Al-4 V alloy. In particular, the TNZT alloy with 3 at.% Si showed the best elastic modulus (48.7 ± 1.0 GPa), yield strength (1151 ± 17 MPa), and cell biological response among all the alloys investigated in this study, and hence was found to be a suitable candidate for application in load-bearing bone implants.

Effect of Nb Content on Microstructure, Property and in Vitro Apatite-Forming Capability of Ti-Nb Alloys Fabricated Via Selective Laser Melting

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

In Situ Fabrication of a Titanium-Niobium Alloy with Tailored Microstructures, Enhanced Mechanical Properties and Biocompatibility by Using Selective Laser Melting

Effect of TiC on Microstructures and Mechanical Behaviors of Low-Density Nb-Ti-Al Alloys Fabricated by Laser Solid Forming

Effect of Ti and Al Interaction on Microstructures and Mechanical Properties of the Nb-Ti-Si-Al Alloys

Microstructure, Mechanical Behavior and Biocompatibility of Powder Metallurgy Nb-Ti-Ta Alloys As Biomedical Material.

Effect of Nb Additions on Microstructure and Properties of Γ-Tial Based Alloys Fabricated by Selective Laser Melting

Effect of Nb Addition on Mechanical Properties and Corrosion Behavior of Ti6Al4V Alloy Produced by Selective Laser Melting

Influence of Nb content on mechanical behavior and microstructure of Ti-Nb alloys

Effect of Nb Addition on Microstructure, Mechanical Properties and Castability of Β-Type Ti–Mo Alloys

In situ production of low-modulus Ti–Nb alloys by selective laser melting and their functional assessment toward orthopedic applications

Effect of Nb Content on Microstructural Evolution, Mechanical and Tribological Properties of in Situ Alloyed Copper-Modified Titanium Produced Using Laser Powder Bed Fusion

In Situ Fabrication of Ti-xNb Alloys by Conventional Powder Metallurgy

Microstructure and Mechanical Behavior of Metal Injection Molded Ti–Nb Binary Alloys As Biomedical Material

Effects of Alloying Elements and Annealing Treatment on the Microstructure and Mechanical Properties of Nb-Ta-Ti Alloys Fabricated by Partial Diffusion for Biomedical Applications

Mechanical and biological properties of Ti–(0–25 wt%)Nb alloys for biomedical implants application

Effect Of Fabrication Process On Microstructure Of High Nb Containing Tial Alloy

Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting

As-cast Microstructure and Mechanical Properties of Ti-10Mo-XNb Alloys

Effects of alloying elements on microstructure of Ti-Nb alloy during the mechanical alloying and spark plasma sintering processing

Effect of Silicon Content on the Microstructure Evolution, Mechanical Properties, and Biocompatibility of Β-Type TiNbZrTa Alloys Fabricated by Laser Powder Bed Fusion.