Hydrogen-induced Magnesium–zirconium Interfacial Coupling: Enabling Fast Hydrogen Sorption at Lower Temperatures

Xiaoli Ding,Yongtao Li,Fang,Dalin Sun,Qingan Zhang

DOI: https://doi.org/10.1039/c7ta00460e

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:The construction of energy-favorable Mg–Zr–H interfaces provides channels to control hydrogen transfer to realize fast storage in Mg-based materials.

What problem does this paper attempt to address?

Construction of Mg/Zr superlattice structure to achieve efficient hydrogen storage via atomic-scale interaction in Mg-Zr modulation films

Jiayao Qin,Xingyu Zhou,Yiyuan Fu,Jiangwen Liu,Hui Wang,Liuzhang Ouyang,Meiqin Zeng,Yu-Jun Zhao,Min Zhu

DOI: https://doi.org/10.1016/j.actamat.2023.119470

IF: 9.4

2023-10-30

Acta Materialia

Abstract:Mg-based alloys have great potential for application owing to their high hydrogen storage capacity but still suffer from too high temperature to absorb/desorb hydrogen due to overly stable de/hydriding thermodynamics and poor kinetics. To overcome this barrier, in this work, atomic-scale superlattice structures have been successfully fabricated in Mg-Zr modulation films using a self-designed semi-co-sputtering method. For comparison, Mg/Zr multilayer films with thicker layers are also prepared. The Mg/Zr interface density in Mg-Zr modulation films is much higher than in Mg/Zr multilayer films, thus exhibiting different structure changes in hydrogenation and excellent hydrogen storage properties. Transmission electron microscopy observation shows that the as-deposited Mg-Zr modulation films have ultra-thin coherent layers and grow along the [0001] direction. These modulated films keep their original lattice structure after de/hydrogenation, indicating the formation of solid solution with the entering of hydrogen atoms into the film. In contrast, the Mg/Zr multilayer films form MgH 2 phase after hydrogenation. The Mg-Zr modulation film absorbs hydrogen at room temperature and begins to release hydrogen at approximately 81 °C, whereas the hydrogen release temperature of the conventional MgH 2 and the present Mg/Zr multilayer film is about 287 and 171 °C, respectively. DFT calculation further reveals that the great enhancement of the above-mentioned properties can be attributed to the synergetic effect of Zr catalysis and strain induced by coherent heterointerfaces. The present work provides a new insight for developing Mg-based hydrogen storage alloys.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Enhanced Hydrogen Storage Properties of MgH2 by the Synergetic Catalysis of Zr0.4Ti0.6Co Nanosheets and Carbon Nanotubes

Liuting Zhang,Ze Sun,Zeliang Cai,Nianhua Yan,Xiong Lu,Xinqiao Zhu,Lixin Chen

DOI: https://doi.org/10.1016/j.apsusc.2019.144465

IF: 6.7

2019-01-01

Applied Surface Science

Abstract:Transition metal nanoparticles have shown great catalytic effect on MgH2, yet excellent cyclic stability can be attached due to the addition of carbon nanotubes. In this paper, MgH2 + 10 wt% Zr0.4Ti0.6Co/5 wt% Carbon nanotubes (CNTs) composite is designed to investigate the synergistic modification of Zr0.4Ti0.6Co nanosheets and carbon nanotubes on the hydrogen storage performance of MgH2. Compared with pure MgH2, the initial hydrogen release temperature of MgH2 + 10 wt% Zr0.4Ti0.6Co /5 wt% CNTs composite decreases to 180 degrees C and the composite can quickly release 90% H-2 within 10 min at 300 degrees C. In addition, the completely dehydrogenated sample can absorb 3.51 wt% H-2 within 20 min under 3 Mpa hydrogen pressure at 125 degrees C. Ulteriorly, the activation energy values of dehydrogenation and rehydrogenation of MgH2 decrease to 70.5 +/- 7.8 kJ/mol and 35.8 +/- 3.8 kJ/mol on account of the presence of 10 wt% Zr0.4Ti0.6Co/5 wt% CNTs, which reasonably explains the remarkable reduction of the temperature for hydrogen sorption. Furthermore, the MgH2 + 10 wt% Zr0.4Ti0.6Co/5 wt% CNTs composite shows excellent cycling performance, indicative of potential application in practical hydrogen storage in the nearest future.
Promoting Catalysis in Magnesium Hydride for Solid-State Hydrogen Storage Through Manipulating the Elements of High Entropy Oxides

Li Wang,Liuting Zhang,Fuying Wu,Yiqun Jiang,Zhendong Yao,Lixin Chen

DOI: https://doi.org/10.1016/j.jma.2024.01.030

IF: 11.813

2024-01-01

Journal of Magnesium and Alloys

Abstract:The lattice distortion effect and cocktail effect of high-entropy oxides (HEOs) will dominate the catalytic effect of the materials, in order to study the influence of the constituent elements of HEOs on the lattice distortion effect and cocktail effect, through elemental manipulation of Cr, Cu, and La, high entropy oxides (HEOs) catalyst CrMnFeCoNiO (Cr1:1), CuMnFeCoNiO (Cu1:1), and LaMnFeCoNiO (La1:1) were effectively synthesized by the facile co-precipitation approach. With a size of about 10 nm, Cr1:1 presented significant modification impacts on enhancing the hydrogen storage capability of MgH2. Specifically, MgH2 was able to release hydrogen at 200 °C with the addition of Cr1:1, MgH2+10wt% Cr1:1 showed prompt rate of dehydrogenation which could release 5.56 wt% H2 in 20 min at 250 °C, and the activation energy of MgH2 was lowered to 69.77± 3.75 kJ⋅mol−1 by adding Cr1:1. According to the Chou model fitting, the exceptional kinetic performance of the composite was attributable to a rate-controlling step changed from low-speed surface penetration to high-speed diffusion. Furthermore, MgH2+10wt% Cr1:1 was capable of absorbing hydrogen at ambient temperature and the composite could uptake 6 wt% H2 within 8 min at the temperature of 150 °C. Due to the high entropy effects of HEOs, Cr1:1 possessed superior stability, which guarantees the robust cycling qualities of MgH2+10wt% Cr1:1. Meanwhile, microstructure analysis revealed that the active sites with numerous heterogeneous structures were uniformly dispersed on surfaces, exhibiting superior catalytic effects on improving the hydrogen storage performance of MgH2.
Ultrafast hydrogenation of magnesium enabled by tetragonal ZrO2 hierarchical nanoparticles

X.L. Zhang,X. Zhang,L.C. Zhang,Z.G. Huang,F. Fang,J.J. Hu,Y.X. Yang,M.X. Gao,H.G. Pan,Y.F. Liu,Xuelian Zhang,Xin Zhang,Lingchao Zhang,Zhenguo Huang,Fang Fang,Jianjiang Hu,Yaxiong Yang,Mingxia Gao,Hongge Pan,Yongfeng Liu

DOI: https://doi.org/10.1016/j.mtnano.2022.100200

IF: 10.3

2022-04-01

Materials Today Nano

Abstract:Transition metal catalysts are particularly effective in improving the reaction kinetics of light metal hydrides for reversible hydrogen storage. Herein, tetragonal ZrO2 hierarchical nanoparticles (nano-ZrO2) composed of primary particles of ∼4 nm in diameter are successfully synthesized by a facile one-pot solvothermal process. The unique hierarchical structure features homogeneous distributions of in situ formed multivalent Zr-based species, which allow superior catalytic activity for hydrogen storage in MgH2. The MgH2+10 wt% nano-ZrO2 starts releasing H2 at 163 °C after one activation, which is 107 °C lower than additive-free MgH2, and 50 °C lower than that of bulk ZrO2-doped MgH2. At 230 °C, 5.9 wt% of H is rapidly liberated within 20 min from the nano-ZrO2-containing MgH2. More importantly, the material shows superior hydrogenation kinetics compared with all reported catalyst-modified MgH2. The nano-ZrO2-containing Mg took up 4.0 wt% of H in only 12 s at 100 °C under 50 bar H2, 400 times faster than the bulk-ZrO2-modified sample. Even at 50 °C, approximately 1.8 wt% H was absorbed within 1 min. Our findings provide useful insights into the design and development of high-performance catalysts toward solid-state hydrogen storage materials.

materials science, multidisciplinary,nanoscience & nanotechnology
Synergistic Catalysis in Monodispersed Transition Metal Oxide Nanoparticles Anchored on Amorphous Carbon for Excellent Low-Temperature Dehydrogenation of Magnesium Hydride

Meng Zhang,Xuezhang Xiao,Jianfeng Mao,Zhenyun Lan,Xu Huang,Yunhao Lu,Bosang Luo,Meijia Liu,Man Chen,Lixin Chen

DOI: https://doi.org/10.1016/j.mtener.2019.01.001

IF: 9.257

2019-01-01

Materials Today Energy

Abstract:Magnesium hydride (MgH2) has been considered to be one of the most promising solid-state hydrogen storage materials owing to its high hydrogen capacities, excellent reversibility and abundant source. However, the high dehydrogenation energy barrier and poor kinetics embarrass the practical application of MgH2 in fuel cell. Doping nano-catalyst is deemed to be the most effective method to improve kinetics property of hydrogen storage materials, but the nanoparticles generally suffer from agglomeration and inactivation during the cycling hydrogen storage. Here we present a promising strategy to facilely prepare a high-efficiency transition metal oxide nano-catalyst, TiO2 nanoparticles, in which monodispersed single-crystal-like TiO2 nanoparticles are wrapped with amorphous carbon. The in-situ synthesized TiO2 nanoparticles/amorphous carbon catalyst exhibit superior catalytic effect on the dehydrogenation properties of MgH2. A significant reductions of hydrogen desorption temperature (163.5 degrees C) and activation energy (69.2 kJ mol(-1)) have been obtained for the TiO2 nanoparticles/amorphous carbon catalyzed MgH2, which can be fully rehydrogenated with a reversible capacity of about 6.5 wt% at 200 degrees C within 5 min, and then completely dehydrogenated at 275 degrees C within 10 min. It is demonstrated that such significantly improved hydrogen desorption properties can be attributed to the in-situ formation of TiO2 nanoparticles, amorphous carbon and multi-valance Ti species, which play the synergistically catalytic roles in the nano-catalyst. In particular, the presence of amorphous carbon in the catalyst can not only prevent the aggregation and growth of catalyst nanoparticles, but also dramatically reduce the desorption energy value of H in MgH2, according to the density functional theory calculation. This finding opens a new venue for the synthesis of monodispersed single-crystal-like TiO2 nanoparticles/amorphous carbon catalyst with high-activity, safety, low cost, and its practical application in MgH2 and other hydrogen storage systems. (C) 2019 Elsevier Ltd. All rights reserved.
Low-temperature Solid-State Hydrogen Storage Via Efficiently Catalyzed MgH2

Liang Dan,Hui Wang,Xiaobao Yang,Jiangwen Liu,Liuzhang Ouyang,Min Zhu

DOI: https://doi.org/10.1016/j.renene.2024.121009

IF: 8.7

2024-01-01

Renewable Energy

Abstract:The urgent development of safe, high-density hydrogen transport and storage technologies is crucial for renewable hydrogen energy. In the present work, a highly efficient N, Nb-doped TiO2 catalyst was synthesized using an NH3 plasma process to catalyze reversible hydrogen sorption of the high-density hydride MgH2. The catalyzed MgH2 exhibits rapid hydrogen uptake even at room temperature and dehydrogenation at a greatly decreased temperature of 175 degrees C. The onset dehydrogenation temperature of the catalyzed MgH2 is reduced to 155 degrees C with an activation energy of 57.33 kJ/mol. Theoretical calculations suggest that the modified TiO2 significantly reduces the dissociation energy barrier and the H2 dissociation energy, accelerating the combination of hydrogen atoms with Mg. The presence of N atoms could also weaken the Mg-H bonds, facilitating the decomposition of MgH2. This work demonstrates the potential of high-density solid-state hydrogen storage via catalyzed MgH2 under moderate conditions.
In situ creation of catalytic multiphase and multiscale surroundings for remarkable hydrogen storage performance of MgH2

Lingchao Zhang,Xin Zhang,Wenxuan Zhang,Fang Fang,Juan Li,Jianjiang Hu,Changdong Gu,Wenping Sun,Mingxia Gao,Hongge Pan,Yongfeng Liu

DOI: https://doi.org/10.1039/d3ta06754h

IF: 11.9

2023-12-23

Journal of Materials Chemistry A

Abstract:Catalysed magnesium hydride (MgH2) holds the greatest promise as a solid-state hydrogen storage medium for mobile and stationary applications. However, the design and fabrication of highly active catalysts to enable MgH2 to reversibly desorb/absorb a large amount of hydrogen still remains challenging. In this work, a novel nanostructured ZrFe2 (nano-ZrFe2) measured 30-120 nm in size was designed and fabricated as a precursor of catalyst, which was readily converted into ultrafine ZrH2 and metallic Fe nanoparticles upon ball milling with MgH2 and the first de-/hydrogenation, consequently delivering quite high catalytic activity for hydrogen storage in MgH2. The MgH2 containing 10 wt% nano-ZrFe2 desorbs 6.2 wt% H2 starting from approximately 193 oC, which is lowered by 35 oC with respect to the micron-ZrFe2-modified MgH2 (~228 oC). When operated at 50 bar of hydrogen pressure, the dehydrogenated sample absorbs ~5.3 wt% H2 at 200 oC within 30 minutes. The remarkably improved kinetic properties are mainly attributed to the ultrasmall nanoparticles and uniform, dispersive distribution of the in-situ formed ZrH2 and Fe. Such in-situ conversion of nano-ZrFe2 not only provides a multiphase and multiscale catalytic environment that enables high reacting and catalytic activity but also facilitates the H diffusion owing to the increased interfaces, consequently promoting the dissociation and recombination of H2 molecules. The important insights in the new nanoscaled intermetallics will enlarge the scope of the design and synthesis of much higher active catalysts for hydrogen storage in light-metal hydrides, especially in MgH2.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Combination of Nanosizing and Interfacial Effect: Future Perspective for Designing Mg-based Nanomaterials for Hydrogen Storage

Yi Jia,Chenghua Sun,Shaohua Shen,Jin Zou,Samuel S. Mao,Xiangdong Yao

DOI: https://doi.org/10.1016/j.rser.2014.12.032

2015-01-01

Abstract:Hydrogen storage is now the “bottle neck” to realize application of hydrogen as the renewable energy. The breakthrough in hydrogen storage is quite urgent. Magnesium is a promising candidate for hydrogen storage that attracts tremendous interest in last a few decades and significant progress has been made in recent years. Accordingly, in this article, we comprehensively reviewed different strategies to overcome the key barriers of high desorption temperature and low kinetics, especially on the recent approaches of nanosizing and interfacial confinement. We also try to give our own point of view on the future perspectives of research in Mg for hydrogen storage.
Tailoring MgH2 for hydrogen storage through nanoengineering and catalysis

Zhao Ding,Yuting Li,Hang Yang,Yangfan Lu,Jun Tan,Jianbo Li,Qian Li,Yu'an Chen,Leon L. Shaw,Fusheng Pan

DOI: https://doi.org/10.1016/j.jma.2022.09.028

IF: 11.813

2022-11-01

Journal of Magnesium and Alloys

Abstract:Hydrogen energy has been recognized as “Ultimate Power Source” in the 21st century, which could be the best solution to the looming energy crisis and climate degeneration in the near future. Due to its high safety, low price, abundant resources and decent hydrogen storage density, magnesium based solid-state hydrogen storage materials are becoming the leading candidate for onboard hydrogen storage. However, the high operation temperature and slow reaction rate of MgH2, as a result of the large formation enthalpy and high reaction activation energy, respectively, are the first and most difficult problems we need to face and overcome to realize its industrialization. Herein, a state-of-the-art review on tailoring the stable thermodynamics and sluggish kinetics of hydrogen storage in MgH2, particularly through nanoengnieering and catalysis is presented, aiming to provide references and solutions for its promotion and application. Promising methods to overcome the challenges faced by MgH2/Mg, such as bidirectional catalysts and nanoconfinement with in-situ catalysis are compared and the required improvements are discussed to stimulate further discussions and ideas in the rational design of MgH2/Mg systems with ability for hydrogen release/uptake at lower temperatures and cycle stability in the near future.

metallurgy & metallurgical engineering
In Situ Formation of Mg2Ni on Magnesium Surface Via Hydrogen Activation for Improving Hydrogen Sorption Performance

Pei Liu,Jiajia Lian,Haipeng Chen,Baozhong Liu,Shixue Zhou

DOI: https://doi.org/10.1021/acsaem.2c00465

IF: 6.4

2022-01-01

ACS Applied Energy Materials

Abstract:To improve the hydrogen sorption rate and lower the dehydrogenation temperature, the Mg2Ni was formed in situ on the Mg surface by the hydrogen activation from Mg-NiO and Mg-NiCl2 composites. Among these two, Mg-5NiO absorbs 6.19 wt % H-2 in 40 min at 320 degrees C, considerably higher than Mg-5NiCl(2) (5.52 wt % H-2) or pure milled Mg (4.09 wt % H-2). When compared with MgH2, the decomposition peak temperature and apparent activation energy of MgH2-5NiO are reduced by, respectively, 24.6 degrees C and 49.7 kJ/mol H-2 while, respectively, 40.5 degrees C and 24 kJ/mol H-2 for MgH2-5NiCl(2). Micro-structural analysis indicates that the in situ formed Mg2Ni on the Mg surface is of critical importance for improving hydrogen storage performance of the material. The in situ formed Mg2Ni facilitates the dissociation of H-2 molecules during the hydrogenation process and benefits the cleavage of the Mg-H bond during dehydrogenation for H-2 formation. The strategy of in situ formation from precursors can inspire the design of solid material for hydrogen storage.
In Situ Formation of Mg 2 Ni on Magnesium Surface via Hydrogen Activation for Improving Hydrogen Sorption Performance

Pei Liu,Jiajia Lian,Haipeng Chen,Baozhong Liu,Shixue Zhou

DOI: https://doi.org/10.1021/acsaem.2c00465

IF: 6.4

2022-05-04

ACS Applied Energy Materials

Abstract:To improve the hydrogen sorption rate and lower the dehydrogenation temperature, the Mg2Ni was formed in situ on the Mg surface by the hydrogen activation from Mg–NiO and Mg–NiCl2 composites. Among these two, Mg–5NiO absorbs 6.19 wt % H2 in 40 min at 320 °C, considerably higher than Mg–5NiCl2 (5.52 wt % H2) or pure milled Mg (4.09 wt % H2). When compared with MgH2, the decomposition peak temperature and apparent activation energy of MgH2–5NiO are reduced by, respectively, 24.6 °C and 49.7 kJ/mol H2 while, respectively, 40.5 °C and 24 kJ/mol H2 for MgH2–5NiCl2. Micro-structural analysis indicates that the in situ formed Mg2Ni on the Mg surface is of critical importance for improving hydrogen storage performance of the material. The in situ formed Mg2Ni facilitates the dissociation of H2 molecules during the hydrogenation process and benefits the cleavage of the Mg–H bond during dehydrogenation for H2 formation. The strategy of in situ formation from precursors can inspire the design of solid material for hydrogen storage.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Recent progress on enhancing the hydrogen storage properties of Mg-based materials via fabricating nanostructures: A critical review

Xin Ding,Ruirun Chen,Jiaxin Zhang,Wenchao Cao,Yanqing Su,Jingjie Guo

DOI: https://doi.org/10.1016/j.jallcom.2021.163137

IF: 6.2

2022-01-01

Journal of Alloys and Compounds

Abstract:The on-board hydrogen storage needs light, compact, and affordable system to replace the compressed hydrogen tanks. MgH2 is regarded as one of the most promising candidates for solid-state hydrogen storage. Due to the thermodynamically stable Mg-H bond, the poor dissociation ability of H-2 molecules and recombination ability of H atoms on Mg surface, and the low diffusion coefficient of H atoms in Mg, especially in MgH2, there remains a challenge to design a material capable of absorbing and desorbing hydrogen rapidly at moderate temperatures. Herein, common strategies to improve the hydrogen storage properties of Mg-based materials are introduced. Some recent studies for overcoming the thermodynamic and kinetic barriers are reviewed, especially the approaches to fabricate nanostructure in Mg-based materials. The nanometric crystals or particles are synthesized by mechanical deformation, reduction in solution, physical/chemical vapor deposition, interface confinement. The nano-catalyst can be decorated by external doping or in-situ synthesis. In particular, the thermodynamic kinetic parameters for hydrogenation and dehydrogenation are provided, and the mechanisms for the enhanced properties are summarized. The principles of structural design and catalytic decoration are discussed, and challenges and perspectives of fabricating nanostructures in Mg-based hydrogen storage materials are proposed. (C) 2021 Elsevier B.V. All rights reserved.
Interfacial Engineering of Fluorinated TiO 2 Nanosheets with Abundant Oxygen Vacancies for Boosting the Hydrogen Storage Performance of MgH 2

Qingyun Shi,Yuxing Gao,Shaolei Zhao,Chunmin Zhang,Cong Liu,Chunli Wang,Shaohua Wang,Yongzhi Li,Dongming Yin,Limin Wang,Yong Cheng

DOI: https://doi.org/10.1002/smll.202307965

IF: 13.3

2023-12-05

Small

Abstract:Abstract The interaction between fluorinated surface in the partially reduced nano‐crystallite titanium dioxide (TiO 2‐x (F)) and MgH 2 is studied for the first time. Compared with pristine MgH 2 (416 °C), the onset desorption temperature of MgH 2 +5 wt.% TiO 2‐x (F) composite can be dramatically lowered to 189 °C. In addition, the composite exhibits remarkable dehydrogenation kinetics, which can release 6.0 wt.% hydrogen thoroughly within 6 min at 250 °C. The apparent activation energy for dehydriding is decreased from 268.42 to 119.96 kJ mol −1 . Structural characterization and theoretical calculations indicate that the synergistic effect between multivalent Ti species, and the in situ formed MgF 2 and MgF 2‐x H x is beneficial for improving the hydrogen storage performance of MgH 2 . Moreover, oxygen vacancies can accelerate the electron transportation and facilitate hydrogen diffusion. The study provides a novel perspective on the modification of MgH 2 by fluorinated transition metal oxide catalyst.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Enhancing Hydrogen Storage Properties of MgH2 by Transition Metals and Carbon Materials: A Brief Review

Ze Sun,Xiong Lu,Farai Michael Nyahuma,Nianhua Yan,Jiankun Xiao,Shichuan Su,Liuting Zhang

DOI: https://doi.org/10.3389/fchem.2020.00552

IF: 5.5

2020-01-01

Frontiers in Chemistry

Abstract:Magnesium hydride (MgH2) has attracted intense attention worldwide as solid state hydrogen storage materials due to its advantages of high hydrogen capacity, good reversibility, and low cost. However, high thermodynamic stability and slow kinetics of MgH2 has limited its practical application. We reviewed the recent development in improving the sorption kinetics of MgH2 and discovered that transition metals and their alloys have been extensively researched to enhance the de/hydrogenation performance of MgH2. In addition, to maintain the cycling property during the de/hydrogenation process, carbon materials (graphene, carbon nanotubes, and other materials) have been proved to possess excellent effect. In this work, we introduce various categories of transition metals and their alloys to MgH2, focusing on their catalytic effect on improving the hydrogen de/absorption performance of MgH2. Besides, carbon materials together with transition metals and their alloys are also summarized in this study, which show better hydrogen storage performance. Finally, the existing problems and challenges of MgH2 as practical hydrogen storage materials are analyzed and possible solutions are also proposed.
Improved Kinetics of Nanoparticle-Decorated Mg-Ti-Zr Nanocomposite for Hydrogen Storage at Moderate Temperatures

Chunguang Chen,Jialiang Wang,Hui Wang,Tong Liu,Li Xu,Xingguo Li

DOI: https://doi.org/10.1016/j.matchemphys.2017.11.050

IF: 4.778

2017-01-01

Materials Chemistry and Physics

Abstract:The hydrogenation kinetics of Mg can be improved by mixing with Ti hydrides catalytic additives. But the dehydrogenation kinetics of Mg is still not acceptable in the practical application cases. To address this dilemma, Zr hydride is introduced into the Mg-Ti system. The Mg-TiH1.971-TiH1.5-ZrH1.66 nanocomposite is synthesized by hydrogen plasma-metal reaction (HPMR) method and activation process at 673 K. The synthesized nanocomposite presents the special surficial decorated nanostructure, that is the surfaces of Mg nanoparticles (NPs) of about 130 nm are uniformly embedded with the spherical TiH1.971-TiH1.5-ZrH1.66 NPs (20 nm). It is demonstrated that the decorated TiH1.971-TiH1.5-ZrH1.66 NPs can act as a combining catalytic effect in improving the hydrogen sorption kinetics of Mg at moderate temperatures. The decorated TiH1.971-TiH1.5-ZrH1.66 NPs has a pioneer (de)hydrogenation effect, causing the H concentration difference from the surface and inner core of Mg, favorably for the following hydrogen sorption of Mg. Particularly, the dehydrogenation kinetics is significantly enhanced as the result of the introduction of Zr hydride NPs. The Mg-TiH1.971-TiH1.5-ZrH1.66 nanocomposite can efficiently uptake 4.2 wt % H-2 within 5 min at 473 K and 3.0 wt % H-2 in 5 min at 373 K, and release hydrogen at 573 K and reach a value of 2.7 wt % in 5 min. Even at 473 K the Mg-TiH1.971-TiH1.5-ZrH1.66 nanocomposite can quickly release 1.0 wt % H-2 in 10 min. (C) 2017 Elsevier B.V. All rights reserved.
Nanostructured MXene-based materials for boosting hydrogen sorption properties of Mg/MgH2

Yingyan Zhao,Bolun Wang,Li Ren,Yinghui Li,Xi Lin,Qiuyu Zhang,Zhigang Hu,Jianxin Zou

DOI: https://doi.org/10.1016/j.matre.2024.100255

2024-01-01

Abstract:Hydrogen holds the advantages of high energy density, great natural abundance and zero emission, making it suitable for large scale and long term energy storage, while its safe and efficient storage is still challenging. Among various solid state hydrogen storage materials, MgH2 is promising for industrial applications due to its high gravimetric and volumetric hydrogen densities and the abundance of Mg on earth. However, the practical application of MgH2 has been limited by its stable thermodynamics and slow hydrogen desorption kinetics. Nanocatalysis is considered as a promising approach for improving the hydrogen storage performance of MgH2 and bringing it closer to the requirements of commercial applications. It is worth mentioning that the recently emerging two-dimensional material, MXene, has showcased exceptional catalytic abilities in modifying the hydrogen storage properties of MgH2. Besides, MXene possesses a high surface area, excellent chemical/physical stability, and negatively charged terminating groups, making it an ideal support for the "nanoconfinement” of MgH2 or highly active catalysts. Herein, we endeavor to provide a comprehensive overview of recent investigations on MXene-based catalysts and MXene supports for improving the hydrogen sorption properties of Mg/MgH2. The mechanisms of hydrogen sorption involved in Mg-MXene based composites are highlighted with special emphases on thermodynamics, kinetics, and catalytic behaviors. The aim of this work is to provide a comprehensive and objective review of researches on the development of high-performance catalysts/supports to improve hydrogen storage performances of Mg/MgH2 and to identify the opportunities and challenges for future applications.
Fast Mg-based hydrogen storage with flow-through hydrogen as a cooling medium: A numerical study

Yuhan Song,Yinan Liu,Ziwen Zou,Zexu Wang,Yiwei Sun,Huaiyu Shao,Menglong Hao

DOI: https://doi.org/10.1016/j.ijhydene.2023.07.025

IF: 7.2

2023-07-01

International Journal of Hydrogen Energy

Abstract:The formation of magnesium hydrides through the chemical reaction between magnesium and hydrogen gas is considered one of the most effective hydrogen storage methods. During this reaction process, thermal management is crucial to maintain the reaction active because of the large amount of heat generated, but has been challenging due to the poor heat transfer in the powder bed. In this study, a novel reactor of tooth-shaped configuration is designed for Mg-based hydrogen gas storage, where the hydrogen is not only the stored gas but also serves as the cooling medium in direct contact with the Mg powders. The hydrogen gas in the reactor can flow uniformly through the interior of the Mg plate of compacted powders at a relatively high rate. The proposed direct contact cooling reactor with tooth-shaped configuration is studied numerically in comparison with another direct contact cooling reactor with parallel sheet configuration as well as the traditional reactor with a second cooling medium. The required reaction time for storage for the tooth-shaped configuration is 40% and 78% lower compared with that of the parallel sheet configuration and the traditional reactor, respectively. The reaction rate increases with higher flow rate of hydrogen gas, although at the cost of higher pumping power. When the hydrogen storage rate and the storage density of the total system are the main considerations, the tooth-shaped configuration with flow-through hydrogen demonstrates clear advantages over the other two reactors.

energy & fuels,electrochemistry,chemistry, physical
Efficient Catalysis of FeNiCu-based Multi-Site Alloys on Magnesium-Hydride for Solid-State Hydrogen Storage

Shuai Li,Liuting Zhang,Fuying Wu,Yiqun Jiang,Xuebin Yu

DOI: https://doi.org/10.1016/j.cclet.2024.109566

IF: 9.1

2024-01-01

Chinese Chemical Letters

Abstract:Hydrogen, as a cheap, clean, and cost-effective secondary energy source, performs an essential role in optimizing today's energy structure. Magnesium hydride (MgH2 ) represents an attractive hydrogen carrier for storage and transportation, however, the kinetic behavior and operating temperature remain undesirable. In this work, a dual-phase multi-site alloy (MsA) anchored on carbon substrates was designed, and its superior catalytic effects on the hydrogen storage properties of MgH2 were reported. Mechanism analysis identified that multi-site FeNi3 /NiCu nanoalloys synergistically served as intrinsic drivers for the striking de/hydrogenation performance of the MgH2 -MsA systems. Concretely, the unique multi-metallic site structure attached to the surface of MgH2 provided substantial reversible channels and accessible active sites conducive to the adsorption, activation, and nucleation of H atoms. In addition, the coupling system formed by FeNi3 and NiCu dual-phase alloys further enhanced the reactivity between Mg/MgH2 and H atoms. Hence, the onset dehydrogenation temperature of MgH2 + 5 wt% MsA was reduced to 195 degrees C and the hydrogen desorption apparent activation energy was reduced to 83.6 kJ/mol. 5.08 wt% H2 could be released at 250 degrees C in 20 min, reaching a high dehydrogenation rate of 0.254 wt% H2 /min, yet that for MgH2 at a higher temperature of 335 degrees C was only 0.145 wt% H2 /min. Then, the dehydrogenated MgH2 -MsA sample could absorb hydrogen from room temperature (30 degrees C) and charge 3.93 wt% H2 at 100 degrees C within 20 min under 3.0 MPa H2 pressure. Benefiting from carbon substrates, the 5 wt% MsA doped-MgH2 could still maintain 6.36 wt% hydrogen capacity after 20 cycles. In conclusion, this work provides experimental rationale and new insights for the design of efficient catalysts for magnesium-based solid-state hydrogen storage materials. (c) 2024 Published by Elsevier B.V. on behalf of Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences.
Superior hydrogen storage kinetics of MgH2 by in-situ generated α-Fe from the Fe-zeolitic imidazolate framework

Huimin Yang,Xuan Sun,Qun Luo,Yangfan Lu,Qian Li,Fusheng Pan

DOI: https://doi.org/10.1016/j.scriptamat.2023.115782

IF: 6.302

2024-01-01

Scripta Materialia

Abstract:While MgH2 is one of the promising hydrogen storage materials, its poor de/hydrogenation kinetics have hindered its potential applications. Here, we report that kinetic and cycle properties can be improved using Fe-doped zeolitic imidazolate framework (Fe-ZIF) as the catalysts. The synthesized MgH2@5 wt.% Fe-ZIF can absorb 5.0 wt.% hydrogen in 1 min at 200 °C and desorb 5.0 wt.% hydrogen within 16 min at 300 °C. No clear degradation of catalytic effects was observed over 30 cycles. Structural analysis revealed that the Fe-ZIF gradually decomposed into α-Fe, which strongly interacts with MgH2, realizing much higher catalytic activity and stability. Furthermore, the Fe-ZIF is characterized by a simple process and low cost nature, posing the metal-ZIF composite as a promising platform to disperse nano-catalysts in Mg-based hydrogen storage materials.

materials science, multidisciplinary,nanoscience & nanotechnology,metallurgy & metallurgical engineering
Enhanced hydrogen sorption properties of MgH2 when doped with mechanically alloyed amorphous Zr0·67Ni0.33 particles

Jinjian Dong,Subrata Panda,Wen Zhu,Jianxin Zou,Wenjiang Ding

DOI: https://doi.org/10.1016/j.ijhydene.2020.03.119

IF: 7.2

2020-10-01

International Journal of Hydrogen Energy

Abstract:In the present study, the effect of amorphous Zr0·67Ni0.33 additive containing nano-ZrO2 on the hydrogen sorption kinetics and thermodynamics of Mg/MgH2 was investigated. The amorphous Zr0·67Ni0.33 particles prepared by mechanical alloying of stoichiometric elements were introduced into MgH2 powder through high-energy milling to produce a MgH2/Zr0·67Ni0.33 composite. Structural and morphological analyses revealed that the nanostructuring effect of the ZrO2 containing amorphous Zr0·67Ni0.33 has led to significant grain-size refinement of MgH2 to the nanometric scale. As a result, the MgH2/Zr0·67Ni0.33 composite demonstrates enhanced hydrogenation and dehydrogenation kinetics (4.0 wt%/50 s/250 °C and 5.0 wt%/4 min/325 °C, respectively). Meantime, substantially lowered enthalpies (−63.40 and 67.06 kJ/mol H2 obtained through pressure-composition-isotherm measurements) and reduced desorption temperature (~270 °C) were observed in the composite as compared to the pure MgH2, possibly due to the dissolution of Ni into MgH2 lattice during ball milling.

energy & fuels,electrochemistry,chemistry, physical

Hydrogen-induced Magnesium–zirconium Interfacial Coupling: Enabling Fast Hydrogen Sorption at Lower Temperatures

Construction of Mg/Zr superlattice structure to achieve efficient hydrogen storage via atomic-scale interaction in Mg-Zr modulation films

Enhanced Hydrogen Storage Properties of MgH2 by the Synergetic Catalysis of Zr0.4Ti0.6Co Nanosheets and Carbon Nanotubes

Promoting Catalysis in Magnesium Hydride for Solid-State Hydrogen Storage Through Manipulating the Elements of High Entropy Oxides

Ultrafast hydrogenation of magnesium enabled by tetragonal ZrO2 hierarchical nanoparticles

Synergistic Catalysis in Monodispersed Transition Metal Oxide Nanoparticles Anchored on Amorphous Carbon for Excellent Low-Temperature Dehydrogenation of Magnesium Hydride

Low-temperature Solid-State Hydrogen Storage Via Efficiently Catalyzed MgH2

In situ creation of catalytic multiphase and multiscale surroundings for remarkable hydrogen storage performance of MgH2

Combination of Nanosizing and Interfacial Effect: Future Perspective for Designing Mg-based Nanomaterials for Hydrogen Storage

Tailoring MgH2 for hydrogen storage through nanoengineering and catalysis

In Situ Formation of Mg2Ni on Magnesium Surface Via Hydrogen Activation for Improving Hydrogen Sorption Performance

In Situ Formation of Mg 2 Ni on Magnesium Surface via Hydrogen Activation for Improving Hydrogen Sorption Performance

Recent progress on enhancing the hydrogen storage properties of Mg-based materials via fabricating nanostructures: A critical review

Interfacial Engineering of Fluorinated TiO 2 Nanosheets with Abundant Oxygen Vacancies for Boosting the Hydrogen Storage Performance of MgH 2

Enhancing Hydrogen Storage Properties of MgH2 by Transition Metals and Carbon Materials: A Brief Review

Improved Kinetics of Nanoparticle-Decorated Mg-Ti-Zr Nanocomposite for Hydrogen Storage at Moderate Temperatures

Nanostructured MXene-based materials for boosting hydrogen sorption properties of Mg/MgH2

Fast Mg-based hydrogen storage with flow-through hydrogen as a cooling medium: A numerical study

Efficient Catalysis of FeNiCu-based Multi-Site Alloys on Magnesium-Hydride for Solid-State Hydrogen Storage

Superior hydrogen storage kinetics of MgH2 by in-situ generated α-Fe from the Fe-zeolitic imidazolate framework

Enhanced hydrogen sorption properties of MgH2 when doped with mechanically alloyed amorphous Zr0·67Ni0.33 particles