Abstract:Polystyrene (PS) is a widely used building insulation material with good mechanical strength and strong temperature adaptability. However, PS itself is highly flammable and displays poor flame retardancy. At present, building fires caused by organic external wall thermal insulation materials prepared from PS represent a new fire hazard. In this study, the addition of an intumescent flame retardant (IFR) to reduce the flammability of PS was achieved. Using melamine (MEL), acrylonitrile-styrene-acrylate (ASA), and phytic acid (PA) as raw materials, a new type of flame retardant (MAP) was prepared by an electrostatic self-assembly method and was introduced to modify PS. Its effect on the flammability of PS composites was also investigated. The flammability of the PS composites was characterized using the limiting oxygen index (LOI) and vertical combustion. The effect of MAP on the morphology of the carbon layer formed from polymer decomposition was studied using scanning electron microscopy (SEM). By adding MAP to a PS/20%N-IFR flame-retardant composite, the flame-retardant property was significantly improved, the limiting oxygen index reached 37, and the vertical combustion reached a V-0 level. The fire performance index (FPI) of the PS/20%N-IFR composite reached 0.0054, which was significantly higher than that of the control PS (0.037) as determined by the cone calorimetry test. The SEM results showed that the introduction of MAP can increase the density of the carbon layer after combustion. The heat release rate for combustion was reduced. In addition, the mechanical properties of the PS/20%N-IFR composites were compared with those with no flame retardant. The tensile strength of the PS/20%N-IFR composite was 26.1 MPa and the elongation of the PS/20%N-IFR composite remained at 2.2%. The PS/20%N-IFR composite displayed better flame retardancy than the untreated material and good mechanical properties. The presence of MAP prevented the heat and oxygen transfer and interrupted the releasing of flammable products, thus protecting the PS from burning. This flame-retardant material may find broad applications in building insulation materials.

Preparation of Metal–Organic Frameworks and Their Application As Flame Retardants for Polystyrene

Hybridization of the Zinc-Based Organic Framework with Diphenylfenosundinyl Chloride and Its Combination with Hexaphenoxycyclotriphosphazene for Flame Retardancy of Epoxy Resin

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Preparation of a novel Fe‐MOF as the flame retardant synergist and its application in polystyrene

The combustion and pyrolysis process of flame-retardant polystyrene/cobalt-based metal organic frameworks (MOF) nanocomposite

Composites Filled with Metal Organic Frameworks and Their Derivatives: Recent Developments in Flame Retardants

Which part of metal-organic frameworks affects polymers' heat release, smoke emission and CO production behaviors more significantly, metallic component or organic ligand?

Two-Dimensional Metal Phenylphosphonates As Novel Flame Retardants for Polystyrene

Metal-Organic Frameworks For Flame Retardant Polymers Application: A Critical Review

Recent Progress on Metal–Organic Framework and Its Derivatives as Novel Fire Retardants to Polymeric Materials

Preparation of a Cobalt Metal-Organic Framework (Co-Mof) and Its Application As a Polypropylene Flame Retardant by Compounding with Melamine Polyphosphate

A novel exploration of metal–organic frameworks in flame-retardant epoxy composites

Synergetic Effect of Ferrocene and Mos2 in Polystyrene Composites with Enhanced Thermal Stability, Flame Retardant and Smoke Suppression Properties

Preparation, Characterization And Properties Of Polystyrene Composites Using Octaphenyl Polyhedral Oligomeric Silsesquioxane And Its Bromide Derivative

Hyper-branched Polymer Grafting Graphene Oxide As an Effective Flame Retardant and Smoke Suppressant for Polystyrene

Investigation of a Combination of Novel Polyphosphoramide and Boron-Containing Compounds on the Thermal and Flame-Retardant Properties of Polystyrene

A novel halogen-free flame-retardant fabrication for the study of smoke suppression and flame retardancy of polystyrene

Preparation of a New Type of Expansion Flame Retardant and Application in Polystyrene

Hierarchical core-shell SiO2@COFs@metallic oxide architecture: An efficient flame retardant and toxic smoke suppression for polystyrene

DOPO-Modified Two-Dimensional Co-Based Metal-Organic Framework: Preparation and Application for Enhancing Fire Safety of Poly(lactic acid)

Vertically Aligned Nickel 2-Methylimidazole Metal–Organic Framework Fabricated from Graphene Oxides for Enhancing Fire Safety of Polystyrene