Abstract:Abstract Hollow-structured NiO + Ni nanofibers wrapped by graphene were designed and successfully fabricated via a simple method. First, solid NiO + Ni nanofibers were prepared by electrospinning followed by calcination. Here, a portion of the metallic Ni was retained to improve the electrochemical performance of NiO by adjusting the calcination temperature. Next, the nanofibers were thoroughly mixed with different amounts of graphene and calcinated once more to form hollow-structured NiO + Ni nanofibers with an extremely high specific surface via the reaction between graphene and NiO on the nanofiber surface and subsequent migration of NiO into the nanofibers. Results showed that the obtained hollow-structured NiO + Ni electrode demonstrates optimal electrochemical performance when the graphene content is controlled to 3 wt%. The first cycle discharge/charge specific capacity of the electrode peaked (1596/1181 mAh · g −1 ) at 100 mA · g −1 , with a coulombic efficiency of approximately 74% (60% for 0 wt% graphene, 65% for 1 wt% graphene, and 51% for 4 wt% graphene). It also presented excellent cycling stability after 100 cycles at 100 mA · g −1 on account of its high retained discharge specific capacity (251 mAh · g −1 for 0 wt% graphene, 385 mAh · g −1 for 1 wt% graphene, 741 mAh · g −1 for 3 wt% graphene, and 367 mAh · g −1 for 4 wt% graphene). Moreover, the synthesized electrode possessed outstanding rate capability owing to its large average discharge specific capacity of approximately 546 mAh · g −1 (45 mAh · g −1 for 0 wt% graphene, 256 mAh · g −1 for 1 wt% graphene, and 174 mAh · g −1 for 4 wt% graphene) from 100 mA · g −1 to 2000 mA · g −1 . The observed improvement in electrochemical performance could be attributed to the increase in active sites and decrease in charge transport distance in the hollow-structured NiO + Ni nanofibers. Excessive introduction of graphene caused a sharp loss in electrochemical performance due to the agglomeration of graphene sheets on the nanofiber surfaces.

Synthesis Of Alpha-Fe2o3, Fe3o4 And Fe2n Magnetic Hollow Nanofibers As Anode Materials For Li-Ion Batteries

Synthesis of α-Fe<sub>2</sub>O<sub>3</sub>, Fe<sub>3</sub>O<sub>4</sub> and Fe<sub>2</sub>N magnetic hollow nanofibers as anode materials for Li-ion batteries

Facile Synthesis of Α-Fe2o3/nb2o5 Heterostructure for Advanced Li-Ion Batteries

Novel strategy to achieve Co3O4, CoO and Co2N hollow nanofibers as advanced anode materials for Li-ion batteries

Synthesis And Lithium Storage Performance Of Alpha-Fe2o3-Ag Hybrid Nanorod Anode For Lithium-Ion Batteries

Hollow Structured Carbon@FeSe Nanocomposite As a Promising Anode Material for Li‐Ion Batteries

Synthesis and Characterization of Hollow Alpha-Fe2o3 Spheres with Carbon Coating for Li-Ion Battery

Facile Synthesis Of Single-Crystalline Mesoporous Alpha-Fe2o3 And Fe3o4 Nanorods As Anode Materials For Lithium-Ion Batteries

Synthesis of one-dimensional NiFe2O4 nanostructures: tunable morphology and high-performance anode materials for Li ion batteries

Α-Fe2o3 Nanoparticle-Loaded Carbon Nanofibers As Stable and High-Capacity Anodes for Rechargeable Lithium-Ion Batteries.

High Performance Co3O4/Li2TiO3 Composite Hollow Nanofibers As Anode Material for Li-ion Batteries

Carbon-coated MnFe2O4 nanoparticle hollow microspheres as high-performance anode for lithium-ion batteries

Electrospun LiMn1.5Ni0.5O4 Hollow Nanofibers As Advanced Cathodes for High Rate and Long Cycle Life Li-ion Batteries

N-doped Coaxial CNTs@α-Fe2O3@C Nanofibers As Anode Material for High Performance Lithium Ion Battery

High Performance Nano-Α-fe2o3 Electrode Materials Synthesized by Facile and Green Approaches for Lithium-Ion Batteries

Hollow nanoparticle-assembled hierarchical NiCo<sub>2</sub>O<sub>4</sub> nanofibers with enhanced electrochemical performance for lithium-ion batteries

Nano electrochemical reactors of Fe2O3 nanoparticles embedded in shells of nitrogen-doped hollow carbon spheres as high-performance anodes for lithium-ion batteries.

α-Fe2O3 hollow microspheres assembled by ultra-thin nanoflakes exposed with (241) high-index facet: Solvothermal synthesis, lithium storage performance, and superparamagnetic property

Electrochemical performance of α-Fe2O3 nanorods as anode material for lithium-ion cells

Hollow Microspheres and Nanoparticles MnFe 2 O 4 As Superior Anode Materials for Lithium Ion Batteries

Synthesis and electrochemical performance of hollow-structured NiO + Ni nanofibers wrapped by graphene as anodes for Li-ion batteries