Abstract:Iron-based Fischer-Tropsch synthesis provides a promising alternative as a direct and non-petroleum route for producing olefins from syngas (CO + H-2). In general, a promoter is required to regulate the activity and olefin selectivity, and the major challenges come from catalyst deactivation due to carbon deposition and sintering under drastic reaction conditions (340 degrees C, high pressure). In this study, we show a totally different strategy for solving these problems. We find that the originally large spherical Fe2O3 particles of around 120 nm assisted by graphene without an additional promoter can gradually evolve during the FTS reaction, forming much smaller cylindrical Hagg carbide nanocapsules of about 10 nm with a single (510) crystal facet, that display excellent activity nearly 40 times that of the unmodified one, olefin selectivity of 76% (84% if methane is not considered) and high stability. In contrast, the original Fe2O3 catalyst and carbon-containing polymer material (e.g. PAA, PVP)-modified Fe2O3 catalysts exhibit significantly lower selectivity for olefins and higher selectivity for methane and deactivate rapidly. Different from the above-mentioned peculiar evolution of iron particles, the iron particles over these spent catalysts aggregate into larger ones having multiple crystal facets, e.g. chi-Fe5C2 (510), and chi-Fe5C2 (-202), and at the same time serious carbon deposition is observed, which mainly accounts for catalyst deactivation. In the case of activated carbon and carbon nanofiber supported iron catalysts with initially small iron particles below 10 nm, irregular morphology and multiple crystal facets of iron carbides are also observed over the spent catalysts. DFT calculations demonstrate that the chi-Fe5C2 (510) crystal facet is more active and favorable for the formation of olefins than the chi-Fe5C2 (-202) crystal facet, which is well in accordance with our experimental results. The presented methodology provides a new strategy to control the morphology and crystal facet of iron carbide during the catalytic reaction for solving the toughest problems in heterogeneous catalysis.

Iron-based Fischer–Tropsch Synthesis of Lower Olefins: the Nature of Χ-Fe5c2 Catalyst and Why and How to Introduce Promoters

Direct Production of Hydrocarbons by Fischer-Tropsch Synthesis Using Newly Designed Catalysts

Stabilizing the Active Phase of Iron-Based Fischer–Tropsch Catalysts for Lower Olefins: Mechanism and Strategy

Recent advances in iron-based catalysts for Fischer–Tropsch to olefins reaction

High-temperature Fischer–Tropsch Synthesis over the Li-promoted FeMnMgOx Catalysts

Insights into the influence of support and potassium or sulfur promoter on iron-based Fischer–Tropsch synthesis: understanding the control of catalytic activity, selectivity to lower olefins, and catalyst deactivation

Two-dimensional graphene-directed formation of cylindrical iron carbide nanocapsules for Fischer–Tropsch synthesis

Synthesis of Iron-Carbide Nanoparticles: Identification of the Active Phase and Mechanism of Fe-Based Fischer–Tropsch Synthesis

The application of DFT calculation in the study of iron-based catalyst for Fischer-Tropsch synthesis

The design principle of iron-based catalysts for fischer-tropsch synthesis: from theory to practice

Fabrication of K-promoted Iron/carbon Nanotubes Composite Catalysts for the Fischer–Tropsch Synthesis of Lower Olefins

Effects of Al, Si, Ti, Zr Promoters on Catalytic Performance of Iron-Based Fischer–Tropsch Synthesis Catalysts

In Situ Active Site for Fe-Catalyzed Fischer-Tropsch Synthesis: Recent Progress and Future Challenges

Preparation and Catalysis of Carbon‐Supported Iron Catalysts for Fischer–Tropsch Synthesis

Design of Ultra-Active Iron-Based Fischer-Tropsch Synthesis Catalysts over Spherical Mesoporous Carbon with Developed Porosity

Synthesis of stable and low-CO 2 selective ε-iron carbide Fischer-Tropsch catalysts.

Highly Active and Stable Carbon Nanosheets Supported Iron Oxide for Fischer‐Tropsch to Olefins Synthesis

Recent Advances in Understanding the Key Catalyst Factors for Fischer-Tropsch Synthesis

Crucial Roles of Support Modification and Promoter Introduction in Fe/CNT Catalyzed Syngas Conversion to Lower Olefins

One-Pot Solvothermally Synthesized MFe2O4 (M=Fe, Mn, Co, Ni) Microspheres as Catalysts for Fischer-Tropsch to Olefins

Fischer–Tropsch Synthesis to Lower Olefins over Potassium-Promoted Reduced Graphene Oxide Supported Iron Catalysts