Abstract:Self-healable polyurethanes (PUs) containing reversible dynamic bonds have been widely recognized and rapidly developed in recent years. Because the self-heal capability and mechanical properties of materials are mutually exclusive in nature, it is still a formidable challenge to design a highly efficient self-healable and robust PUs, especially in wearable electronics field. Herein, a series of self-healable thermosetting PU elastomer based on widely used phenolic urethane bond was prepared to achieve above requirements. In order to investigate the effect of introducing different bisphenol chain extenders into the hard segment domain on the dissociation temperature of phenolic carbamate bond, both bisphenol A (BPA) and bisphenol AF (BPAF) were used to synthesize thermosetting PU elastomers (PU-BPA and PU-BPAF). The healing efficiency of PU-BPA was 95% with a thermal treatment at 100 °C for 1 h, and its initial dissociation temperature was 90 °C. Due to the presence of trifluoromethyl (-CF3) group, the thermal self-healing efficiency of PU-BPAF was improved, which could be completely healed (100%) at the same conditions and its initial dissociation temperature was reduced to 80 °C. PU-BPAF were used to prepare a self-healable triboelectric nanogenerator (SH-TENG) to convert mechanical movements into electrical energy that can be applied to next-generation wearable devices.Their measured open circuit voltage, short circuit current, short-circuit charge quantity were 240 V, 2.20 μA, 20 nC, respectively. In addition, the PU-BPAF based SH-TENG exhibited better self-cleaning ability (83%) than that of PU-BPA elastomer, which was attributed to the introduction of trifluoromethyl reducing the surface energy of the material. Consequently, PU-BPAF showed great potentials as a self-healable and stretchable conductor to be applied to flexible electronic devices.

A covalently cross-linked reduced functionalized graphene oxide/polyurethane composite based on Diels–Alder chemistry and its potential application in healable flexible electronics

Flexible and Recyclable Conductive Composite Based on Few-Layered Graphene with Excellent Self-Healing Capability

Self‐Healing Titanium Dioxide Nanocapsules‐Graphene/Multi‐Branched Polyurethane Hybrid Flexible Film with Multifunctional Properties toward Wearable Electronics

NIR Induced Self-Healing Electrical Conductivity Polyurethane/graphene Nanocomposites Based on Diels−Alder Reaction

In Situ Polymerization Of Mechanically Reinforced, Thermally Healable Graphene Oxide/Polyurethane Composites Based On Diels-Alder Chemistry

Healable, highly thermal conductive, flexible polymer composite with excellent mechanical properties and multiple functionalities

Magnetic Liquid Metal (Fe-EGaIn) Based Multifunctional Electronics for Remote Self-Healing Materials, Degradable Electronics, and Thermal Transfer Printing

Highly efficient self-healable and robust fluorinated polyurethane elastomer for wearable electronics

Recent Advances in Self-Healing Hydrogel Composites for Flexible Wearable Electronic Devices

Rapid and Efficient Polymer/graphene Based Multichannel Self-Healing Material Via Diels-Alder Reaction

A High-Capacitance Salt-Free Dielectric for Self-Healable, Printable, and Flexible Organic Field Effect Transistors and Chemical Sensor.

Supramolecular Cross-Linked High-Performance Self-Healing Elastomers Toward Wearable Sensing Applications

Polypyrrole-Doped Conductive Self-Healing Composite Hydrogels with High Toughness and Stretchability

Highly Stretchable Room-Temperature Self-Healing Conductors Based on Wrinkled Graphene Films for Flexible Electronics.

Ethanol-assisted room-temperature rapid self-healing polydimethylsiloxane-polyurea/carbon composite elastomers for energy harvesters and smart sensors

Room-temperature Self-Healing Elastomer-Graphene Composite Conducting Wires with Superior Strength for Stretchable Electronics

Constructing Electrically and Mechanically Self-Healing Elastomers by Hydrogen Bonded Intermolecular Network.

Room temperature self-healing and recyclable conductive composites for flexible electronic devices based on imine reversible covalent bond

Preparation and performance of self-cleaning photothermal-induced self-healing flexible sensors

Construction of Polyurethane Composites Incorporating Borate Ester and B-N Coordinative Bonds: Achieving Ultra-High Fracture Energy, Self-Healing Property, and Facile Recyclability for Wearable Sensors

Stretchable, self-healable integrated conductor based on mechanical reinforced graphene/polyurethane composites