Abstract:A facile in-situ preparation strategy is proposed to anchor amorphous SnO2 nanoparticles into the porous N-doped carbon (NC) matrix to fabricate amorphous composite powders (am-SnO2@p-NC), which feature the hierarchically interconnected and well interlaced porous configurations by employing polyvinylpyrrolidone as the soft template. The morphology regulation of the porous structure is precisely realized by adjusting the content of the template and the relationship between structural evolution and electrochemical performance of composite powders is accurately described to explore the optimal tem-plate dosage. The results indicate that the am-SnO2@p-NC-50 % composite electrode can deliver the improved lithium storage capacity and cycling performance when the content of the template is con-trolled at 0.500 g, in which the initial discharge specific capacity is about 1557.6 mAh/g and the reversible value retains at 841.5 mAh/g after 100 cycles at 100 mA/g. Meanwhile, the discharge specific capacity of 869.8 mAh/g is exhibited for the am-SnO2@p-NC-50 % composite electrode after 60 cycles when the cur-rent density is recovered from 2000 to 100 mA/g. Moreover, the Li. ions diffusion coefficient up to about 5.5 x 10-12 cm2/s is calculated from galvanostatic intermittent titration technique tests, which can be partly ascribed to the conductive NC substrate that provides the high electronic conductivity, and partly to the highly porous structure that shortens Li. ions transfer pathways and guarantees the fast reaction kinetics. Therefore, the hierarchically porous engineering of carbon networks to confine amorphous tran-sition metal oxide nanoparticles is of great significance in the development of high-performance anode materials for lithium-ion batteries.(c) 2023 Elsevier Inc. All rights reserved.

A Cold‐Flow Process for Fabricating a High‐Volumetric‐Energy‐Density Anode for Lithium‐Ion Batteries

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Facile Fabrication of Binder-free Metallic Tin Nanoparticle/Carbon Nanofiber Hybrid Electrodes for Lithium-ion Batteries

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Sn/SnO 2 @C Composite Nanofibers As Advanced Anode for Lithium-Ion Batteries

A Nano-Rattle SnO2@carbon Composite Anode Material for High-Energy Li-ion Batteries by Melt Diffusion Impregnation

A New Process of Preparing Composite Microstructure Anode for Lithium Ion Batteries

Porous Carbon-Coated Silicon Composites for High Performance Lithium-Ion Batterie Anode

Preparation and Electrochemical Properties of High Specific Surface Carbon Aerogel/SnO2 Anode Materials for Li-Ion Batteries

Engineering Amorphous SnO2 Nanoparticles Integrated into Porous N-doped Carbon Matrix As High-Performance Anode for Lithium-Ion Batteries.

Fabrication of Tin-Carbon Composite Anode Material by Electrospinning and Electrostatic Spray Deposition for Lithium Rechargeable Battery

Facile synthesis of ultrafine SnO2 nanoparticles embedded in carbon networks as a high-performance anode for lithium-ion batteries

Facile Preparation of Porous Mn2SnO4/Sn/C Composite Cubes As High Performance Anode Material for Lithium-Ion Batteries

In Situ Embedment of ZnS Nanocrystals in High Porosity Carbon Fibers as an Advanced Anode Material for Efficient Lithium Storage

Fabricating thin two-dimensional hollow tin dioxide/carbon nanocomposite for high-performance lithium-ion battery anode

Dispersing SnO2 Nanocrystals in Amorphous Carbon As a Cyclic Durable Anode Material for Lithium Ion Batteries

High-capacity SiO/SnOx Composite Anode for Lithium Ion Batteries

In Situ Synthesis of HCNFs@SnS2 Composite Via Solid-Phase Vulcanization Reaction for High-Performance Anode of Lithium-Ion Batteries

Cold sintering of a Li-ion cathode: LiFePO4-composite with high volumetric capacity

Engineering amorphous SnO 2 nanoparticles integrated into porous N-doped carbon matrix as high-performance anode for lithium-ion batteries

A Lithium–carbon Nanotube Composite for Stable Lithium Anodes