Abstract:The failure probability and the average strength of quasi-brittle materials such as rock,concrete,etc.,have size effect due to the heterogeneity,and the statistical approach is of importance in the research of this problem.A statistical model for the strength size effect is established based on the weakest link model and the Poisson′s distribution of defects during the failure process of materials.The general expressions of the failure probability and the strength size effect are derived for the case of uniaxial compression.From these expressions,it is known that,with respect to volume,the failure probability is monotonically increasing and the strength is monotonically decreasing.The strength varies very slowly and thus may be regarded as constant when the volume becomes very large within usual limited scope.As for defect-free perfect materials,the issue of size effect does not longer exist.The Weibull distribution and the lognormal distribution are then introduced into the general expressions,respectively.The applicability of these expressions is demonstrated with the results of some typical uniaxial compressive strength tests of eight kinds of rocks.It can be found that the two distributions are able to describe the size effect of quasi-brittle materials,with less strength given by using Weibull distribution at the same volume.The difference between the strengths from these two distributions is somewhat slight when the specimen volume is near the reference volume.The expression using the lognormal distribution can give more accuratestrengths throughout the volume range,which is valuable in the strength evaluation through indoor test with small specimens.It is also concluded that the lognormal distribution can be used in the research of strength size effect by statistical approach as a simple improvement of the classical Weibull size effect theory.

Critical Poisson’s ratio between toughness and brittleness

Analysis on the influence of Poisson’s ratio on brittle fracture by applying uni-bond dual-parameter peridynamic model

MIXED MODE FRACTURE FOR LINEAR ELASTIC MATERIALS BASED ON STRAIN THEORY USED IN LOW PERMEABILITY RESERVOIRS

Critical ductile fracture criterion based on first principal stress and stress triaxiality

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

3D-generalized maximum tangential strain criterion for predicting mixed-mode I/II/III fracture initiation of brittle materials considering T-stress effects

Preliminary Study on the Determination of the Weibull Modulus of Strength Distribution in Quasi-Brittle Materials

A ductile fracture criterion based on stress triaxiality and its application to the shearing process

A novel fracture criterion for elastic‐brittle cracked body under compression and shear conditions

FAILURE PROBABILITY AND STRENGTH SIZE EFFECT OF QUASI-BRITTLE MATERIALS

Correlating toughness and roughness in ductile fracture

New Perspective on Poisson's Ratios of Elastic Solids

Modified nonlinear Mohr–Coulomb fracture criteria for isotropic materials and transversely isotropic UD composites

Phase-field cohesive fracture theory: A unified framework for dissipative systems based on variational inequality of virtual works

Modelling fracture process zone width and length for quasi-brittle fracture of rock, concrete and ceramics

Mixed-Mode Fracture of Brittle Cellular Materials

A transverse failure criterion for unidirectional composites based on the Puck failure surface theory

A novel and simple variationally-consistent phase-field cohesive zone model for mixed-mode fracture

On Failure Modes and Strength Characterization of Brittle Disordered Materials under Uniaxial Compression and Tension

Experimental and Theoretical Investigation of Size Effects on the Ductile/Brittle Fracture Toughness of A Pressure Steel

Research on crack initiation mechanism and fracture criterion of rock-type materials under compression–shear stress