Abstract:Developing poly(lactic acid) (PLA)-based biodegradable polymer foams with high performance is crucial for sustainable energy conservation and the ecological environment. In this work, by applying poly(lactide-co-caprolactone) (PLCL) as a compatibilizer, the block polymer of poly(l-lactic) acid (PLLA)-b-polycaprolactone (PCL) with a long-chain branched structure was prepared by reactive processing. By utilizing the difference between the glass-transition temperature (T g) and melting temperature (T m) of PLA and PCL, PLLA-b-PCL-PLCL foams with a PCL chain as the foaming phase and an oriented PLLA chain as the enhancing phase were prepared by establishing a solid-phase hot drawing@supercritical CO2 foaming method. The incorporation of PLCL links significantly improved the interfacial compatibility between PLLA and PCL phases and chain entanglements, exhibiting strain-hardening behavior and leading to an improvement in the stretchability of the block polymer. In the hot drawing process in the range of T g(PLA)–T m(PLA), both PLLA and PCL phases were elongated along the drawing direction, and with an increasing draw ratio, the orientation factor and the crystallinity of the two phases increased evidently, accompanied by the formation of a shish–kebab crystalline structure. In the subsequent foaming process in the range of T g(PCL)–T m(PCL), the molecular chains of the PLLA phase were frozen and the retention of the orientation factor reached over 90%, while under CO2, crystallinity and crystallite size increased and a more perfect crystalline structure formed for the PCL phase. With an increasing draw ratio, the saturated dissolved amount of CO2 increased and the cell density and cell size of foam reached 5.13 × 109 cells/cm3 and 4.06 μm, respectively. The fibrillar structures of the PLLA phase appeared on the cell wall, while the tensile strength and modulus of foam reached as high as 65.9 MPa and 1.01 GPa, respectively. As a result, a super-strong PLA-based microcellular foam with dense micropores and highly oriented microfibrillar structures was constructed.

Structure–Properties Relationship of a Novel Multilayer Film/Foam Material Produced Through Co-extrusion and Orientation

High-Strength and Shape-Memory Epoxy Cellular Material with Wood-Like Architecture

A Novel PLA High Oxygen Barrier Multilayer Film/foam

Fabrication of Architectured Multilayers with Mismatched Rheological Behaviors: Layer Stability, Structure, and Confinement Dictate Polyethylene-Based Film Properties

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Construction of a Highly Oriented Poly(lactic acid)-Based Block Polymer Foam and Its Self-Reinforcing Mechanism

Unprecedented cell structure variation in multilayered alternating PS/PMMA foams

The Formation of a Highly Oriented Structure and Improvement of Properties in PP/PA6 Polymer Blends during Extrusion-Stretching

Fabrication of Multilayered Β-Form Transcrystallinity in Isotactic Polypropylene for Achieving Optimized Mechanical Performances

Foaming behavior of the multilayered ps / pa 6 blend and its anisotropic mechacical properties

Optimization of the cellular morphology of biaxially stretched thin polyethylene foams produced by extrusion film blowing

Preparation of Polypropylene Foams with Bimodal Cell Structure Using a Microporous Molecular Sieve As a Nucleating Agent

Multi-Response Optimization and Cell Structure-Property Relationships of Polylactide (PLA) Foams

Crushing and Densification of Rapid Prototyping Polylactide Foam: Meso-structural Effect and a Statistical Constitutive Model

Robust biaxially stretchable polylactic acid films based on the highly oriented chain network and "nano-walls" containing zinc phenylphosphonate and calcium sulfate whisker: Superior mechanical, barrier, and optical properties

Influence of Molecular Structure on the Rheological Properties and Foamability of Long Chain Branched Polypropylene by “One-Pot” Reactive Extrusion

Impact of Different Die Draw Ratio on Crystalline and Oriented Properties of Polypropylene Cast Films and Annealed Films

Morphology and Compressive Properties of Extruded Polyethylene Terephthalate Foam

Layer-by-layer stacking, low-temperature welding strategy to effectively recycle biaxially-oriented polypropylene film waste

Preparation of Desirable Porous Cell Structure Polylactide/Wood Flour Composite Foams Assisted by Chain Extender

Fabrication of poly(lactic acid) foam with high expansion ratio and oriented cellular structure by restricting cold crystallization