Abstract:Poor interfacial compatibility between the solid polymer electrolyte and lithium anode is one of bottleneck issues for the wide application of solid-state lithium batteries. In this work, a strategy to improve the stability of a solid electrolyte/anode interface by applying graphene oxide (GO) coating on the surface of the poly(propylene carbonate) (PPC) solid electrolyte membrane to react with metal Li and spontaneously reducing in situ to form a reduced graphene oxide (rGO) interface-modified layer was proposed. The rGO interlayer contributes to the combination of an interface and inhibition of lithium dendrites. The GO-modified composite solid electrolyte (GO-SE) shows a wide electrochemical window of up to 4.8 V, high room temperature ionic conductivity reaching 2.22 × 10–4 S·cm–1, and a high ion migration number of 0.9. This GO-SE is suitable for high-voltage solid-state lithium batteries, and the assembled NCM622/GO-SE/Li cells have an initial specific capacity of about 160 mA h/g at 0.5 C, and the specific capacity remains above 100 mA h/g after 200 cycles, much more stable than that of the battery with an unmodified SE membrane at different rates from 0.1 to 2 C. This interface modification method is promising to be widely applied in the solid-state lithium batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.1c01932.Preparation flow chart of GO-SE; raw materials and characterization details; TGA/DSC curves of the SE membrane without GO modification; equivalent circuit of EIS for the Li/SE/Li cell; charge–discharge curves of the NCM622/GO-SE/Li full cells upon cycling; and GO-coated SE film and rGO/Li after cycling (PDF)This article has not yet been cited by other publications.

Graphene Oxide Modified Metallic Lithium Electrode and Its Electrochemical Performances in Lithium–sulfur Full Batteries and Symmetric Lithium–metal Coin Cells

Enhanced Performance of Lithium‐Ion Batteries with Copper Oxide Microspheres @ Graphene Oxide Micro/Nanocomposite Electrodes

Improving Performance And Cyclability Of Zinc-Silver Oxide Batteries By Using Graphene As A Two Dimensional Conductive Additive

Graphene Oxides-Guided Growth of Ultrafine Co3O4 Nanocrystallites from MOFs As High-Performance Anode of Li-ion Batteries

Chemically engineered graphene oxide as high performance cathode materials for Li-ion batteries

Reduced graphene oxide participation enabling fast nano-homogeneous deposition of sulfur for lithium–sulfur battery cathode

Surface Modification of Nanocrystalline LiMn2O4 Using Graphene Oxide Flakes

Enhance electrochemical performance of Li LauMn1.904 by graphene oxide coating for lithium ion battery

Spray-drying Assisted Hydrothermal Synthesis of ZnIn2S4@GO as Anode Material for Improved Lithium ion Batteries

Carbonized polymer dots functionalized graphene to regulate lithium homogenous deposition and SEI formation dynamics

Dual-Protection of A Graphene-Sulfur Composite by A Compact Graphene Skin and an Atomic Layer Deposited Oxide Coating for A Lithium-Sulfur Battery

Facile fabrication of two-dimensional reduced graphene oxide/CoAl-layered double hydroxides nanocomposites for lithium-oxygen battery with improved electrochemical performance

Reduced graphene oxide wrapped ZnCo layered double hydroxides microsphere as efficient sulfur host in lithium-sulfur batteries

Covalent organic framework wrapped by graphene oxide as an efficient sulfur host for high performance lithium–sulfur batteries

Improving the Interfacial Stability between Lithium and Solid-State Electrolyte via Dipole-Structured Lithium Layer Deposited on Graphene Oxide

Fabrication of Self-Assembled Graphene Oxide Film and Its Application in Aqueous Zinc Metal Batteries

The Reduced Graphene Oxide Conductive Additives with a Certain Defect Concentration Enabling Rate-Capability of Lithium-Ion Batteries

Janus-structured graphene scaffold for bottom-up lithium deposition: A progressive gradient approach

Metal/graphene Oxide Batteries

Solid Electrolyte/Lithium Anodes Stabilized by Reduced Graphene Oxide Interlayers: Implications for Solid-State Lithium Batteries

Ultrathin Al2O3-coated reduced graphene oxide membrane for stable lithium metal anode