Abstract:This study characterized and modeled heterogeneous surface wettability in sandstone and investigated the role of spatial heterogeneity and correlation length of surface wettability on relative permeability in a supercritical CO2 (scCO(2))-brine-rock system. Understanding the role of wettability heterogeneity on relative permeability is essential to geological CO2 sequestration, oil and gas recovery, and contaminated groundwater remediation. Although numerous studies have attempted to understand the influences of surface wettability, capillary number (Ca), and viscosity ratio, the role of the spatial variation and correlation length of surface wettability on two-phase flow in three-dimensional (3D) porous media has not been unraveled due to the challenges in the measurement and representation of realistic rock surface wettability. In this work, we conducted in-situ measurements of surface contact angle (CA) in a Bentheimer sandstone after CO2 flooding using micro-computed tomography (micro-CT), and found that the pore-scale CA distribution on rock surfaces followed a log-normal distribution associated with a spatial correlation length. Based on the statistical information from CT scanning, a Gaussian random field was used to model CA distributions that had desired standard deviations and spatial correlation lengths, which were then adjusted within a certain range of values for sensitivity analyses to study their combined effects on the two-phase flow in the porous medium using the lattice Boltzmann (LB) method. The LB two-phase flow simulation was accelerated using hybrid, multicore parallel computing to overcome the challenges in simulating multiphase flow in a large 3D domain having 800 x 800 x 600 nodes. The simulation results showed that the surface wettability heterogeneity (i.e., standard deviation of CA) had a lesser effect on the relative permeability of the wetting fluid (water) but a more significant impact on the relative permeability of the non-wetting fluid (scCO(2)). The Corey model was used to fit the LB-simulated relative permeability curves of water and scCO(2) and showed that the variations in the relative permeability curves for both water and scCO(2) increased as the standard deviation and spatial correlation length of CA increased. This study illustrated that the assumption of homogeneous surface wettability may cause errors in multiphase flow simulations. The impacts of both the standard deviation and spatial correlation length of CAs should be accounted for. This is the first study that explored the spatial correlation lengths associated with CA distributions on sandstone surfaces and comprehensively investigated the roles of both spatial variation and correlation length of CA on two-phase flow properties in 3D porous media. The optimized LB multiphase flow model was proved a powerful tool to study the interplays and combined effects of these statistical parameters, which had critical applications in numerous natural and engineering processes that involved multiphase flow in porous media.

Pore‐scale Contact Angle Measurements of CO 2 –brine–glass Beads System Using Micro‐focused X‐ray Computed Tomography

Interfacial Tension and Contact Angle Measurements for the Evaluation of CO2‐brine Two‐phase Flow Characteristics in Porous Media

Pore-scale Imaging of Displacement Patterns in an Altered-Wettability Carbonate

Experimental Determination of Wettability and Heterogeneity Effect on CO2 Distribution in Porous Media

Application of X-ray CT investigation of CO 2 –brine flow in porous media

Visualization and Quantification of Capillary Drainage in the Pore Space of Laminated Sandstone by A Porous Plate Method Using Differential Imaging X-Ray Microtomography

Imaging and Measurement of Pore‐Scale Interfacial Curvature to Determine Capillary Pressure Simultaneously with Relative Permeability

The Role of the Spatial Heterogeneity and Correlation Length of Surface Wettability on Two-Phase Flow in a CO2-water-rock System

A thermodynamically consistent characterization of wettability in porous media using high-resolution imaging.

Measurement and estimation of CO2-brine interfacial tension and rock wettability under CO2 sub- and super-critical conditions

Pore-Scale Imaging of Controlled-Salinity Waterflooding in a Heterogeneous Carbonate Rock at Reservoir Conditions

Direct Measurement of the Contact Angle of Water Droplet on Quartz in a Reservoir Rock with Atomic Force Microscopy

Wettability and capillary behavior in a CO2–oil–solid system under near-miscible conditions: A pore-scale study

Wettability Characterization from Pore-Scale Images Using Topology and Energy Balance with Implications for Recovery and Storage

Quantification of Uncertainty and Best Practice in Computing Interfacial Curvature from Complex Pore Space Images.

Internal Erosion Monitoring with a Rowe Cell Type Compression–breakthrough–bender Element Column

iSCAL for Complete Rock Characterization: Using Pore-Scale Imaging to Determine Relative Permeability and Capillary Pressure

Quantification of sub-resolution porosity in carbonate rocks by applying high-salinity contrast brine using X-ray microtomography differential imaging

Using energy balance to determine pore-scale wettability

X‐ray Microtomography of Intermittency in Multiphase Flow at Steady State Using a Differential Imaging Method

Phase Behaviors of Gas Condensate at Pore Scale: Direct Visualization via Microfluidics and In-Situ CT Scanning