Abstract:The performance of the CFRP–steel interface is crucial to the reinforcement efficiency of the steel structures strengthened by using externally pasted CFRP sheet method; while it is influenced significantly by adhesive properties and geometrical characteristics of joints. The present study aims to optimize the adhesive layer of the CFRP–steel interface and establish a theoretical model of predicting the interfacial behaviors of the optimized CFRP–steel joints. A commercially available adhesive was modified by addition of Nano-SiO2 ranged from 0 to 7wt% to ascertain the optimal content of Nano-SiO2. A series of tensile tests were carried out on dog-bone adhesive specimens, single-lap shear specimens and CFRP–steel double-lap joints to obtain the mechanical properties of the adhesive at different content of nanofiller and the corresponding bond–slip laws in the unmodified and modified CFRP–steel interfaces. Accordingly, theoretical models were derived to predict the load capacity of the joints and the bond stress distribution along the CFRP–steel interface during different loading phases. The results show that the mechanical properties of the adhesive are improved with the addition of nano-SiO2 up to 1.4 wt%. When the content of nano-SiO2 rises from 1.4 to 7 wt%, the tensile and shear strengths as well as the tensile modulus decline gradually whereas the ductility keeps growing with a lower growth rate. These indicate the nano-SiO2 content of 1.4 wt% is favorable. Both the peak stress and the load capacity of the CFRP–steel joint increase with the adhesive thickness varying from 0.5 to 1 mm. The bond–slip law of the unmodified CFRP–steel interface can be simplified to be bilinear, regardless of the adhesive thickness and curing duration. In contrast, the modified interface presents a trilinear curve due to the special plastic plateau caused by the filling of nano-SiO2. Consequently, a larger fracture toughness and a higher load capacity can be reached by the optimized joints. The theoretical results are in agreement with the experimental phenomena and results. The modified adhesive is beneficial to utilize the CFRP material better and improve the reinforcement efficiency.

Determination of the Bond–slip Behavior of CFRP-to-steel Bonded Interfaces Using Digital Image Correlation

Experimental study on dynamic behavior of CFRP-to-steel interface

Bond-slip model of the CFRP-steel interface with the CFRP delamination failure

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Effects of mechanical properties of adhesive and CFRP on the bond behavior in CFRP-strengthened steel structures

A Study on the Bond–Slip Relationship of the CFRP–Steel Interface of CFRP Strengthened Steel

Study on the Interface Constitutive Relation between Carbon Fiber Fabric and Steel

Estimation of Bond Strength and Effective Bond Length for the Double Strap Joint between Carbon Fiber Reinforced Polymer (CFRP) Plate and Corroded Steel Plate

Experimental and 3D Numerical Study on CFRP–Concrete Interface Under Dynamic Loading

Experimental and theoretical study on mechanical behaviors of CFRP–steel interface

Strain measurement of CFRP-Steel bonded joints using distributed optical fibre sensors

A unified bond-slip model for the interface between FRP and steel

The Bond-Slip Relationship at FRP-to-Brick Interfaces under Dynamic Loading

Crack Propagation and Debonding Development of CFRP Laminate Strengthened High-Strength Steel Plates under Fatigue Loadings

Experimental Study on Interfacial Bond Behavior between CFRP Sheets and Steel Plates under Fatigue Loading

Determination of fracture toughness of an adhesive in civil engineering and interfacial damage analysis of carbon fiber reinforced polymer–steel structure bonded joints

EXPERIMENTAL INVESTIGATION ON ADHESIVE BONDED JOINTS OF CARBON FIBER COMPOSITE LAMINATES CONTAINING DISBOND DEFECT

Bonding-slip Behaviour of Steel-Concrete Interfaces in CFDST Members with PBL Ribs

Experimental Investigation on Effective Bond Length of Flexurally Cfrp-Strengthened Rc Beams Failed by Intermediate Crack Debonding

Development of the Nonlinear Bond Stress–Slip Model of Fiber Reinforced Plastics Sheet–Concrete Interfaces with a Simple Method

Bond stress-slip relationship of CFRP bar-concrete interface of CFRP reinforced concrete subjected to reversed cyclic loading